• 품질경영학회지
• /
• 제46권3호
• /
• pp.497-508
• /
• 2018

Purpose: The purpose of this study is to research the revision efficiency of the referenced specifications/standards for raw and subsidiary materials in the field of national defense. Methods: Firstly, it was carried out to investigate the all of the Korean military drawings and establish the database for specifications/standards referenced in the field of national defense. Secondly, it was reviewed the validity of referenced specifications/standards of raw and subsidiary materials. Finally, proposal documents were made for invalid referenced specifications/standards of raw and subsidiary materials in order to suggest alternative specifications/standards. Results: All of the specifications/standards referenced in the Korean military drawings were 11,924 kinds and raw and subsidiary specifications/standards were 2,711 kinds. The proposal documents for revision of invalid referenced specifications/standards were suggested and approved by the military procurement standardization committee of DAPA (Defense Acquisition Program Administration). Therefore, the revision process of 472 kinds of referenced specifications/standards and 160,177 papers of the Korean military drawings were finished. Conclusion: Based on the results of this investigation, it could be significantly reduce to administrative costs and efforts through revision of referenced specifications/standards instead of conventional engineering change.

• 한국컴퓨터산업학회논문지
• /
• 제7권4호
• /
• pp.281-292
• /
• 2006

범용 ERP 시스템은 중소형 생산 기업의 생산제품 관리에 부적합한 경우가 종종 발생된다. 이와 같은 이유로 기업의 특성에 맞는 시스템을 다시 개발하여 사용해야 할 필요성이 있다. 이 논문에서는 전선을 생산하는 기업의 다품종 생산제품의 원부자재 관리 시스템을 구현한다. 첫째, 생산 공정에 필요한 원부자재 정보의 데이터베이스를 설계한다. 둘째, 주문 제품을 생산하기 위한 자재 소요량 자동 산출 모들을 개발한다. 셋째, 생산 공정에서의 원부자재의 매입 및 매출 정보를 관리한다. 마지막으로, 입고 및 출고의 이력 관리 모듈, 이력 집계 보고서 출력 모듈을 구현한다.

• Composites Research
• /
• 제22권4호
• /
• pp.50-53
• /
• 2009

이 논문은 주로 방탄재료 중에서 세라믹재료를 바탕으로 한 개인용 방호장비와 헬리콥터용 방탄장비 등 재료의 무게가 중요한 부위에 사용되어지는 재료에 대하여 서술하였다. 세라믹 방탄재료는 원자번호가 작은 보론이 4개원자가 포함되어있고 탄소원자가 1개 들어있는 화합물인 $B_4C$를 근간으로한 재료이기 때문에 무게가 굉장히 적게 나간다. 그러나 이 재료는 용융옹도가 높아 높은 온도에서 소결되어야하고, 소결말도가 높아야 제대로 물성이 나오기 때문에 잘 소결할 수 있도록 하기 위하여 소결조제를 사용하던지 일축 가압소결을 하던지 분말사이즈를 조절하여 쉽게 소결하는 방법을 사용하던지 하여 제품을 만든다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.469-473
• /
• 2006

In general, a classification process between ground data and non-ground data, which include building objects, is required prior to producing a DEM for a certain surface reconstruction from LiDAR data in which the DEM can be produced from the ground data, and certain objects like buildings can be reconstructed using non-ground data. Thus, an exact classification between ground and non-ground data from LiDAR data is the most important factor in the ground reconstruction process using LiDAR data. In particular, building objects can be largely used as digital maps, orthophotos, and urban planning regarding the object in the ground and become an essential to providing three dimensional information for certain urban areas. In this study, an entropy theory, which has been used as a standard of disorder or uncertainty for data used in the information theory, is used to apply a more objective and generalized method in the recognition and segmentation of buildings from raw LiDAR data. In particular, a method that directly uses the raw LiDAR data, which is a type of point shape vector data, without any changes, to a type of normal lattices was proposed, and the existing algorithm that segments LiDAR data into ground and non-ground data as a binarization manner was improved. In addition, this study proposes a generalized building extraction method that excludes precedent information for buildings and topographies and subsidiary materials, which have different data sources.

• 한국건설순환자원학회논문집
• /
• 제9권1호
• /
• pp.20-25
• /
• 2021

시멘트의 주 원료인 시멘트 클링커는 주원료로서 석회석을 사용하여 제조되며, 석회석의 품위에 따라 부원료의 사용이 변화되고, 시멘트 클링커의 생산에도 큰 영향을 미치게 된다. 본 연구에서는 시멘트 클링커 원료인 석회석의 CaO 함량의 변화가 Raw Mill 분쇄성과 시멘트 클링커의 소성성에 미치는 영향성을 파악하기 위하여, 석회석 CaO 함량을 변화시킨 조합원료의 분쇄시간 측정으로 분쇄성을 비교 검토하였고, 분쇄된 조합원료를 1350~1500℃의 범위에서 소성하여 소성성 지수 계산에 의한 시멘트 클링커의 소성성을 파악하였다. 석회석의 품위가 낮을수록 조합원료의 분쇄성은 저하하였고, 석회석의 CaO 함량이 낮을수록 소성온도에 따른 F-CaO의 변화가 크게 나타났다. 그에 따라 높은 B.I. 값이 계산되어, 낮은 시멘트 클링커 소성성을 나타내었다. 또한, 시멘트 클링커의 광물분석 결과에서는 소성온도의 증가로 F-CaO 값이 저하하는 경우, Belite 함량의 감소와 그에 따른 Alite 함량의 증가가 관찰되었다. Alite의 경우 석회석 CaO 함량이 증가함에 따라 R형의 비율은 감소하고 M형의 비율이 증가하였다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.582-589
• /
• 1997

Experiments were conducted to develop foaming agents by using SLES and DH-l09EX as raw material. PG (Propylene glycol) and BC (Butyl cellusolve) were adopted as subsidiary material. The undiluted foam solution was produced with these materials. This solution determined the expansion ratio, viscosity, drainage time and extinguishing ability of the final product. The results indicate that the expansion ratio is over 16 and drainage time is over one minute. The extinguishing ability for SLES system was succeeded in the unit of B-0.5.

• Fisheries and Aquatic Sciences
• /
• 제5권1호
• /
• pp.43-47
• /
• 2002

Jeotgal, salt- fermented sea food, is a kind of Korean traditional foods. We carried out hazard analysis on Changran (stomach and intestine of Alaska pollack) Jeotgal and squid Jeotgal through the whole processing procedures at H Co. located at Guryongpo from April 2000 to September 2001. During this studying period, we educated employee regularly and analyzed hazards on the whole process and then could conclude that pathogenic bacteria and metal particles were most important hazards in Jeotgal. Metal particles in end-product will be eliminated by laser detector before packaging. But bacteria must thoroughly manage through the whole process. Bacteriological qualities of the end products were much improved after education for the employees and by effort for HACCP (Hazard Analysis and Critical Control Point) program introduction. Pathogenic bacteria such as pathogenic Escherichia coli, Salmonella spp., coagulase positive Staphylococcus aureus and Vibrio parahaemolyticus were not detected from not only raw materials but also end products. The falling bacteria in the places such as thawing area, packaging area, seasoning area, fermenting room, subsidiary materials room and storage room were less than 30 CFU per plate for 30 minutes during working time. But those were increased more than 10 times during the resting time. It means that special measures are needed during the break time such as lunch time or exchanging working teams.

• 한국유기농업학회지
• /
• 제20권4호
• /
• pp.475-490
• /
• 2012

Since 1997, Korean Ministry of Knowledge Economy and Ministry of Environment have established data on some 400 basic raw and subsidiary materials and process like energy, petro-chemical, steel, cement, glass, paper, construction materials, transportation, recycling and disposal etc by initiating establishment of LCI database. Regarding agriculture, Rural Development Administration has conducted establishment of LCI database for major farm products like rice, barley, beans, cabbage and radish etc from 2009, and released that they would establish LCI database for 50 items until 2020 later on. The domestic LCI database for seeds, seedling, agrochemical, inorganic, fertilizer and organic fertilizer etc is only at initial stage of establishment, so overseas LCI databases are brought and being used. However, since the domestic and overseas natural environments differ, they fall behind in reliability. Therefore, this study has the purpose to select organic farming materials, survey the production process for various types of organic farming materials and establish LCI database for the effects of greenhouse gas emitted by each crop during the process. As for selecting methods, in this study organic farming materials were selected in the method of direct observation of material and bottom-up method a survey method with focus on the organic farming materials admitted into rice production. For the basic unit of carbon emission amount by the production of 1kg of organic farming material, the software PASS 4.1.1 developed by Korea Accreditation Board under Ministry of Knowledge Economy was used. The study had the goal to ultimately provide basic unit to calculate carbon emission amount in executing many institutions like goal management system and carbon performance display system etc in agricultural sector to be conducted later on. As a result, emission basic units per 1kg of production were calculated to be 0.04968kg-$CO_2$ for oystershells, 0.004692kg-$CO_2$ for expanded rice hull, and 1.029kg-$CO_2$ for bordeaux mixture liquid.

• 한국세라믹학회지
• /
• 제53권4호
• /
• pp.435-443
• /
• 2016

Coal ash, a material generated from coal-fired power plants, can be classified as fly ash and bottom ash. The amount of domestic fly ash generation is almost 6.84 million tons per year, while the amount of bottom ash generation is 1.51 million tons. The fly ash is commonly used as a concrete admixture and a subsidiary raw material in cement fabrication process. And some amount of bottom ash is used as a material for embankment and block. However, the recyclable amount of the ash is limited since it could cause deterioration of physical properties. In Korea, the ashes are simply mixed and used as a replacement material for cement. In this study, an attempt was made to mechanically activate the ash by grinding process in order to increase recycling rates of the fly ash. Activated fly ash was prepared by controlling the mill types and the milling times and characteristics of the mortar containing the activated fly ash was analyzed. When the ash was ground by using a vibratory mill, physical properties of the mortar mixed with such fly ash were higher than the mortar mixed with fly ash ground by a planetary mill.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.438-444
• /
• 2015

본 연구는 발효유류의 HACCP(Hazard Analysis Critical Control Point)시스템 적용을 위한 목적으로 하였다. 발효유류의 주원료, 작업장 시설과 작업자 등에 대하여, 2013년 11월 5일~2014년 4월 13일까지 충청남도 천안시 서북구 소재에 있는 YD 업체에서 제공받았다. 제조공정도는 일반적인 발효유류 제조업체의 제조공정을 참고로 작성하였다. 제조공정도는 원료(원유, 액상과당, 올리고당, 유산균), 부재료, 포장재의 입고, 보관, 투입, 예열, 혼합, 균질, 살균, 예냉, 배양, 냉각, 여과, 내포장, 외포장, 보관 및 출하공정으로 Fig. 1과 같이 작성하였다. 원료의 미생물학적위해요소 분석결과는 Table 1과 같다. 본 연구결과 발효유의 원재료와 살균($90^{\circ}C{\pm}5^{\circ}C$에서 $35{\pm}3$분) 후에는 위해미생물검사 결과는 안전하나 제조환경과 작업자의 미생물검사 결과 체계적인 세척 및 소독을 실시하여 미생물학적 위해를 감소시키고, 작업자 위생교육 등을 통하여 개인위생개념 향상과 작업장 내 공기중의 미생물 관리가 함께 이루어져야 할 것으로 여겨진다.