• 제목/요약/키워드: Rationality of Technology

검색결과 123건 처리시간 0.027초

Change of the Old City by the Modernization

  • Nakagawa, Osamu
    • Journal of East-Asian Urban History
    • /
    • 제1권
    • /
    • pp.25-54
    • /
    • 2019
  • Kyoto, which was Japan's political and cultural capital for more than a millennium before the dawn of the modern era, shows distinctive characteristics formed in the process of urban modernization. A citizen plaza perfectly fit to a modern city is lying on the east side, but a delayed urban reconstruction in the city center due to a strong conservative self-government awareness, as well as a delayed modernization of tax system, caused disorderly urban sprawl to appear in the suburbs. Thanks to the enactment of urban planning law enacted in 1919 by the government (Ministry of Internal Affairs) and an increasing awareness about the necessity and rationality of urban planning projects, urban renovation took place at a rapid pace. In the meantime, new ways of urban design were sought for and experimented to conserve it as a historical city against the city' quickly changing landscape.

A Study on the Health Policy Issues of Telemedicine Problem in Korean

  • Jeun, Young-Ju
    • 한국컴퓨터정보학회논문지
    • /
    • 제20권11호
    • /
    • pp.151-156
    • /
    • 2015
  • Recently, the government tends to address the health policy as an economic logic. However, health policy must be priority to national health right than economic logic. Thus, in this paper analyzes the problems of telemedicine for telemedicine that are at issue in South Korea, based on this, and presents reasonable health policy directions for telemedicine. To amend the law and legislation the health policy and law, analyze the rationality, feasibility of law and sufficient review should be implemented. Comparing to the foreign which introduced telemedicine earlier, discussion on telemedicine in South Korea remains a long way to go and it is now beginning step. Therefore, it should not forget that the health policy of the government with crass insensitivity can bring great disaster. Above all, to the health care, the sufficient review and social consensus which can reduce the side-effects are priority.

Effect of particle size on direct shear deformation of soil

  • Gu, Renguo;Fang, Yingguang;Jiang, Quan;Li, Bo;Feng, Deluan
    • Geomechanics and Engineering
    • /
    • 제28권2호
    • /
    • pp.135-143
    • /
    • 2022
  • Soils are natural granular materials whose mechanical properties differ according to the size and composition of the particles, so soils exhibit an obvious scale effect. Traditional soil mechanics is based on continuum mechanics, which can not reflect the impact of particle size on soil mechanics. On that basis, a matrix-reinforcing-particle cell model is established in which the reinforcing particles are larger-diameter sand particles and the matrix comprises smaller-diameter bentonite particles. Since these two types of particles deform differently under shear stress, a new shear-strength theory under direct shear that considers the stress concentration and bypass phenomena of the matrix is established. In order to verify the rationality of this theory, a series of direct shear tests with different reinforcing particle diameter and volume fraction ratio are carried out. Theoretical analysis and experimental results showed that the interaction among particles of differing size and composition is the basic reason for the size effect of soils. Furthermore, the stress concentration and bypass phenomena of the matrix enhance the shear strength of a soil, and the volume ratio of reinforcing particles has an obvious impact on the shear strength. In addition, the newly proposed shear-strength theory agrees well with experimental values.

An ERP Customizing Methodology Based on Process Model

  • Park, Ji-Hyun;Shon, Joo-Chan;Baik, Jong-Myoung
    • 한국전자거래학회:학술대회논문집
    • /
    • 한국전자거래학회 2001년도 International Conference CALS/EC KOREA
    • /
    • pp.467-475
    • /
    • 2001
  • As a result of the policy for enforcing the information technology led by government and the effort of companies to get over economic crisis through the reformation of business process, the ERP market is being active. However, because imported ERP products that are supplied currently are designed for standard and rationality, they have a limit to support custom processes of domestic companies in South Korea. On the contrary, ERP products by domestic companies in South Korea are unable to support a consistent methodology of constructing ERP system. This is main reason why much time and costs are consumed than that of an original plan. To succeed in ERP construction, the purpose of ERP setup must be defined. To accomplish this end, it is required to analysis business process completely and to make a plan in detail. For ERP providers, they must support a characterized ERP construction methodology and lower the construction cost by improving an ERP package easy to customize[5].

  • PDF

A New Approach for Hierarchical Dividing to Passenger Nodes in Passenger Dedicated Line

  • Zhao, Chanchan;Liu, Feng;Hai, Xiaowei
    • Journal of Information Processing Systems
    • /
    • 제14권3호
    • /
    • pp.694-708
    • /
    • 2018
  • China possesses a passenger dedicated line system of large scale, passenger flow intensity with uneven distribution, and passenger nodes with complicated relations. Consequently, the significance of passenger nodes shall be considered and the dissimilarity of passenger nodes shall be analyzed in compiling passenger train operation and conducting transportation allocation. For this purpose, the passenger nodes need to be hierarchically divided. Targeting at problems such as hierarchical dividing process vulnerable to subjective factors and local optimum in the current research, we propose a clustering approach based on self-organizing map (SOM) and k-means, and then, harnessing the new approach, hierarchical dividing of passenger dedicated line passenger nodes is effectuated. Specifically, objective passenger nodes parameters are selected and SOM is used to give a preliminary passenger nodes clustering firstly; secondly, Davies-Bouldin index is used to determine the number of clusters of the passenger nodes; and thirdly, k-means is used to conduct accurate clustering, thus getting the hierarchical dividing of passenger nodes. Through example analysis, the feasibility and rationality of the algorithm was proved.

A Novel Jamming Detection Technique for Wireless Sensor Networks

  • Vijayakumar, K.P.;Ganeshkumar, P.;Anandaraj, M.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권10호
    • /
    • pp.4223-4249
    • /
    • 2015
  • A novel jamming detection technique to detect the presence of jamming in the downstream direction for cluster based wireless sensor networks is proposed in this paper. The proposed technique is deployed in base station and in cluster heads. The proposed technique is novel in two aspects: Firstly, whenever a cluster head receives a packet it verifies whether the source node is legitimate node or new node. Secondly if a source node is declared as new node in the first step, then this technique observes the behavior of the new node to find whether the new node is legitimate node or jammed node. In order to monitor the behavior of the existing node and new node, the second step uses two metrics namely packet delivery ratio (PDR) and received signal strength indicator (RSSI). The rationality of using PDR and RSSI is presented by performing statistical test. PDR and RSSI of every member in the cluster is measured and assessed by the cluster head. And finally the cluster head determines whether the members of the cluster are jammed or not. The CH can detect the presence of jamming in the cluster at member level. The base station can detect the presence of jamming in the wireless sensor network at CH level. The simulation result shows that the proposed technique performs extremely well and achieves jamming detection rate as high as 99.85%.

A hybrid algorithm for classifying rock joints based on improved artificial bee colony and fuzzy C-means clustering algorithm

  • Ji, Duofa;Lei, Weidong;Chen, Wenqin
    • Geomechanics and Engineering
    • /
    • 제31권4호
    • /
    • pp.353-364
    • /
    • 2022
  • This study presents a hybrid algorithm for classifying the rock joints, where the improved artificial bee colony (IABC) and the fuzzy C-means (FCM) clustering algorithms are incorporated to take advantage of the artificial bee colony (ABC) algorithm by tuning the FCM clustering algorithm to obtain the more reasonable and stable result. A coefficient is proposed to reduce the amount of blind random searches and speed up convergence, thus achieving the goals of optimizing and improving the ABC algorithm. The results from the IABC algorithm are used as initial parameters in FCM to avoid falling to the local optimum in the local search, thus obtaining stable classifying results. Two validity indices are adopted to verify the rationality and practicability of the IABC-FCM algorithm in classifying the rock joints, and the optimal amount of joint sets is obtained based on the two validity indices. Two illustrative examples, i.e., the simulated rock joints data and the field-survey rock joints data, are used in the verification to check the feasibility and practicability in rock engineering for the proposed algorithm. The results show that the IABC-FCM algorithm could be applicable in classifying the rock joint sets.

Development of a regulatory framework for risk-informed decision making

  • Jang, Dong Ju;Shim, Hyung Jin
    • Nuclear Engineering and Technology
    • /
    • 제52권1호
    • /
    • pp.69-77
    • /
    • 2020
  • After the Fukushima Daiichi accidents, public concerns on nuclear safety and the corresponding burden of nuclear power plant licensees are increasing. In order to secure public trust and enhance the rationality of current safety regulation, we develop a risk-informed decision making (RIDM) framework for the Korean regulatory body. By analyzing all the regulatory activities for nuclear power plants in Korea, eight action items are selected for RIDM implementation, with appropriate procedures developed for each. For two items in particular - the accident sequence precursor analysis (ASPA) and the significance determination process (SDP) - two customized risk evaluation software has been developed for field inspectors and probabilistic safety assessment experts, respectively. The effectiveness of the proposed RIDM framework is demonstrated by applying the ASPA procedure to 35 unplanned scrams and the SDP to 24 findings from periodic inspections.

편향의 관점에서 본 한국의 속담과 수수께끼 (The Significance of Korean Proverb and Riddle in the sense of Bias)

  • 김경섭;김정래
    • 문화기술의 융합
    • /
    • 제3권4호
    • /
    • pp.35-42
    • /
    • 2017
  • 행동경제학은(Behavior Economics)은 인간이 합리적인 의사결정을 한다고 가정하는 전통경제학을 부정하고, 경제학에 심리학 기반의 인지적 원리를 적용하여 개인의 의사결정이 어떻게 이루어지는지 설명하기 위해 발전해 왔다. 개인은 의사결정에 있어서 효용을 극대화하기 위한 정보와 시간이 부족하며, 정보를 처리하기 위한 인지적 능력에도 한계가 있다. 따라서 인간의 합리성이란 제한된 합리성일 수밖에 없다. 제한된 합리성으로 인해 인간은 최선의 선택을 하지 못하고 자신이 충분하다고 생각하는 만족할 만한 수준에서 사고를 멈추고 단순한 모형이나 대략적인 추측에 의존하여 의사결정을 하게 된다. 이 단순화되는 의사결정 과정에 작용하는 것이 바로 휴리스틱(Heuristic)이다. 휴리스틱은 기존 경험이나 특정 정보만을 이용하기 때문에 의사결정이나 행동에 편향(Bias)이 생기게 된다. 구비문학은 언어 대중의 어림짐작과 사고의 편향성에 기반을 두고 전승되어 온 특징이 있기에, 행동경제학의 휴리스틱과 편향의 개념을 구비문학에 접합해 논의할 여지는 충분하다. 이 글은 대중의 사고유형과 행동양식을 단문으로 표현한 속담, 민속적인 언어 놀이인 수수께끼를 휴리스틱에 기반한 편향의 관점에서 논의했다. 그 결과 속담은 인간 행동에서 드러나는 편향의 문제점을 지적하는 측면이 강했던 반면, 수수께끼는 편향을 적극적으로 이용하는 면이 더 우세한 것을 알 수 있었다.

직접전단시험모델에 의한 뿌리말뚝의 탄소성조인트 유한요소해석 (Elasto-plastic Joint Finite Element Analysis of Root-pile Using the Direct Shear Test Model)

  • 한중근
    • 한국환경복원기술학회지
    • /
    • 제5권4호
    • /
    • pp.19-30
    • /
    • 2002
  • The stability of slope using root-pile like to the reinforcements is affected by the interaction behavior mechanism of soil-reinforcements. Through the studying on the interaction in joint of its, therefore, the control roles can be find out in installed slope. In study, the stress level ratio based on the insert angle of installed reinforcements in soil used to numerical analysis, which was results from the duty direct shear test in Lab. The maximum shear strain variation on the reinforcements was observed at insert angle, which was approximately similar to the calculated angle based on the equation proposed by the Jewell. The elasto-plastic joint model on the contact area of soil-reinforcements was presumed, the reinforced soil assumed non-linear elastic model and the reinforcements supposed elastic model, respectively. The finite element analysis of assumed models was performed. The shear strain variation of non-reinforced state obtained by the FEM analysis including elasto-plastic joint elements were shown the rationality of general limit equilibrium analysis for the slope failure mode on driving zone and resistance zone, which based on the stress level step according to failure ratio. Through the variation of shear strain for the variation of inserting angle of reinforcements, the different mechanism on the bending and the shear resistance of reinforcements was shown fair possibility.