• Computers and Concrete
• /
• 제17권3호
• /
• pp.387-406
• /
• 2016

Confined transverse reinforcement was arranged in a plastic hinge region to resist the lateral load that increased the lateral confinement effect in the bridge substructure. Columns increased the seismic performance through securing stiffness and ductility. The calculation method of transverse reinforcements at plastic hinges is reported in the AASHTO-LRFD specification. This specification was only proposed for solid reinforced concrete (RC) columns. Therefore, if this specification is applied for another column as composite column besides the solid RC column, the column cannot be properly evaluated. The application of this specification is particularly limited for composite hollow RC columns. The composite hollow RC column consists of transverse, longitudinal reinforcements, cover concrete, core concrete, and an inner tube inserted in the hollow face. It increases the ductility, strength, and stiffness in composite hollow RC columns. This paper proposes a modified equation for economics and rational design through investigation of displacement ductility when applying the existing specifications at the composite hollow RC column. Moreover, a parametric study was performed to evaluate the detailed behavior. Using these results, a calculation method of economic transverse reinforcements is proposed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.462-467
• /
• 1998

A rational method for prediction of long-term deflections of reinforced concrete beams under sustained loads was proposed. Strain and stress distributions of uncracked and fully cracked sections after creep and shrinkage were determined from the requirements of strain compatibility and force equilibrium of a section, and then long-term deflections were calculated from the section analysis results. In fully cracked section analysis, noncoincidence of the neutral axis of strain and the neutral axis of stress after creep and shrinkage was taken into account. The accuracy of the proposed method was verified by comparison with several experimental measurements of beam deflections. The proposed approximate procedure gave the better predictions than the existing approximate methods. At the same time, the proposed method also retained simplicity of the calculation, since maximum long-term deflection could be obtained without tedious integration of the curvatures.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3275-3279
• /
• 2011

유무선망 상호접속 서비스 제공을 통한 통화요금의 사업자별 배부가 서비스 설비원가에 의하여 많은 부분이 정의되는 점을 고려한다면 망 설비를 통하여 제공되는 서비스들의 통화량 기준에 의한 평가가 이루어져야 한다. 이러한 관점에서 이동통신망 설비를 음성, 데이터서비스를 위한 전용설비와 공통설비로 구분하고, 공통설비는 합리적 기준에 의한 서비스별 설비원가의 배부 방법의 도출이 필수적이다. 본 논문에서는 유럽 GSM 시스템에서 이용되고 있는 이동통신망 공통설비 원가 배부 방안 분석을 통하여 국내 CDMA 이동망의 공통설비 원가 배부를 위한 회선 음성 서비스와 패킷 데이터서비스간의 단일 통화량으로 계측하기 위한 서비스간 환산계수 방안을 도출하였다.

• Steel and Composite Structures
• /
• 제25권5호
• /
• pp.523-534
• /
• 2017

Cable-supported ribbed beam composite slab structure (CBS) is proposed in this study. As a new cable-supported structure, it has many merits such as long span availability and cost-saving. Inspired by the previous research on cable-supported structures, the fabrication and construction process are developed. Pre-stress design method based on static equilibrium analysis is presented. In the algorithm, the iteration convergence can be accelerated and the calculation result can be kept in an acceptable precision by setting a rational threshold value. The accuracy of this method is also verified by experimental study on a 1:5 scaled model. Further, important parameters affecting the mechanical features of the CBS are discussed. The results indicate that the increases of sag-span ratio, depth of the ribbed beam and cable diameter can improve the mechanical behavior of the CBS by some extent, but the influence of strut sections on mechanical behavior of the CBS is negligible.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.843-848
• /
• 2011

Planning and construction of railway for high speed trains up to 400 km/h are recently driven in Korea. High speed train is one of the environment-friendly fastest mass transportation means but its noise generated by rolling, traction and aerodynamic mechanism can cause public complaints of residents nearby railways. To cost-effectively prevent the troublesome noise in a railway planning stage, the rational railway noise prediction method considering the characteristics of trains as well as railway structures should be required but it is difficult to find authentic methods for Korean high speed trains such as KTX and KTX-II. In this study, we propose a framework of our own railway noise prediction model emitted by Korean high speed trains over 250 km/h based on the recent research results carried out in EU countries. The model considers railway sound power level using several point sources distributed in heights as well as tracks, whose detail speed- and frequency-dependent emission characteristics of Korean high speed trains should be determined in near future by measurement or numerical analysis. The attenuation during propagation outdoors is calculated by the well-known ISO 9613-2 and auxiliary methods to consider undulated terrain and wind effect.

• 대한토목학회논문집
• /
• 제38권5호
• /
• pp.741-749
• /
• 2018

본 연구는 건설공사 입찰담합으로 인한 손해액 산정에 대하여 합리적이고 과학적인 산정모델을 제시하는데 목적이 있다. 입찰담합 손해액 산정에 대한 선행 연구 및 판결 사례 등을 검토한 결과, 대표적인 문제점으로 낙찰자 결정기준 등의 특성에 대한 충분한 고려가 부족하고 부적정한 비교표준시장의 선택, 가상경쟁가격 영향 인자의 적정성 검토 부족 및 산정모델에 대한 검증의 결여 등이 나타났다. 이러한 문제점을 개선하기 위하여 대안입찰공사를 대상으로 한 손해액 산정모델을 제시하였다. 산정모델은 첫째, 낙찰자 결정기준 등에 부합하는 표준시장을 선정하고 둘째, 가상경쟁가격의 영향 인자에 대한 상관관계를 분석 적합인자를 선택하였으며 셋째, 선택 인자의 회귀분석을 활용하여 모델을 도출하였다. 마지막으로, 제시한 모델에 대한 적합성, 유의성 및 정규성 등의 검증과 실제 담합 사례를 적용하여 실증하였다. 본 연구에서 제시한 산정모델을 통하여 소송 당사자 일방에게 부당한 손해액 부담의 문제점을 해소하고 분쟁을 조기에 해결하게 하여 관계자 모두의 기회손실 등을 방지하는데 기초가 되고자 한다.

• 한국강구조학회 논문집
• /
• 제25권4호
• /
• pp.369-377
• /
• 2013

합성거더 하부 콘크리트에 프리스트레스를 도입한 프리스트레스트 합성거더의 크리프와 건조수축 평가 시 재령보정 유효탄성계수방법을 이용하면 기존의 야쓰미 해법을 이용한 경우보다 더 정확한 결과를 산출할 수 있다. 하지만, 재령보정 유효탄성계수방법은 산출방법이 복잡하므로 실무에서는 야쓰미 해법을 이용하여 장기거동을 해석하는 것이 일반적이다. 이러한 단점을 보완하기 위하여 이 연구에서는 재령보정 유효탄성계수방법에 의해 여러 시공단계별 재령일수에 따른 변수해석을 수행하고, 야쓰미 해법에 의한 장기거동 해석 시 크리프계수를 보정하여 실무에서 합리적으로 반영할 수 있는 방법을 제시하였다.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.733-743
• /
• 2016

The purpose of this study is to present a rational depreciation method for a pyroprocess cost calculation. Toward this end, the so-called advanced decelerated depreciation method (ADDM) was developed that complements the limitations of the existing depreciation methods such as the straight-line method and fixed percentage of declining-balance method. ADDM was used to show the trend of the direct material cost and direct labor cost compared to the straight-line or fixed percentage of the declining-balance methods that are often used today. As a result, it was demonstrated that the depreciation cost of the ADDM, which assumed a pyroprocess facility's life period to be 40 years with a deceleration rate of 5%, takes up 4.14% and 27.74% of the pyroprocess unit cost ($781/kg heavy metal) in the $1^{st}$ and final years, respectively. In other words, it was found that the ADDM can cost the pyroprocess facility's capital investment rationally every year. Finally, ADDM's validity was verified by confirming that the sum of the depreciation cost by year, and the sum of the purchasing cost of the building and equipment, are the same.

• 대한가정학회지
• /
• 제32권1호
• /
• pp.211-228
• /
• 1994

We consider the irrational part of the basic pattern drafting of the Geo-Ko-ri so that we want to design it more scientically. So there are problems which is found after we considered with comparison about the existingly basic pattern drafting of Geo-go-ri. (1) there is a difference between the practical and Calculation. (2) The part of the curved line was mad indistinctly There is a difference betweence the calculating expression and calculating value. (4) There are some parts which lack objectivity about the reference size. (5) The calculating method of Collar-width and Neck-Nidth are not formative and rational. These are items that we must consider and study further. Especially if we can make up of the scientific form in consideration of the formativeness focused on "git" I think it will make a great contribution to not only the standardization of the basic pattern of Geo-go-ri and the use of the use of education but also the manufacture of individual clothing the production by Auto CAD. Auto CAD.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.61-68
• /
• 1998

It has become important to evaluate the qualitive reliability and condition assessment of existing structural systems in order to establish a rational program for repair and maintenance. Since most of if existing structural system may suffer from defect corrosion and damage, it is necessary to account for their effects in fuzzy reliability analysis, In this paper, an attempt is made to develope a reliability analysis for damaged structural systems using failure possibility theory. Damage state is specified in terms of linguistic valiables using natural language information and numerical information, which are defined by fuzzy sets. Using a subjective condition index of failure possibility and information of the damage state is introduced into the calculation of failure probability. The subjective condition index of quantitative and qualitative analysis method is newly proposed based on the fuzzy set operations, namely logical product, drastic product, logical sum and drastic sum