• 한국자기학회지
• /
• 제2권2호
• /
• pp.132-139
• /
• 1992

핵자기공명 단층촬영장치에서 원통좌표계를 사용할 수 있게 하는 경사자계를 고안하였다. 고안된 경사계는 자기장방향이 축방향을 향하면서 방사방향으로는 단조증가하고 방사방향과 축방향으로의 평균적인 기울기의 비가 경사자계 코일의 중심에서 10배가 넘도록 했다. 방사방향과 축방향으로의 기울기의 비를 솔레 노이드의 길이와 중심에 감는 역방향전류의 감은 횟수와 전류량의 함수로 계산하여 최대치를 이루는 조건을 찾아내고 이에 근거하여 실제 코일을 제작하였다. 제작된 코일을 사용하여 실험한 결과 이론적인 예측과 10% 정도의 오차를 갖는 영상을 이차원영상 방법보다 훨씬 짧은 시간에 얻을 수 있어 훨씬 빨리 변화하는 대상의 영상화를 가능케함을 보였다.

• 한국조경학회지
• /
• 제18권1호
• /
• pp.53-68
• /
• 1990

The purpose of this study was to establish the more rational and practical basic theory for the landscape planning in the aparment complex. In this study, the actual conditions of exterior space, the residens' satisfaction degree and the correlation between exterior space and the residents' satisfaction defree were investigated and analyzed on the 13apartment complexes in Taegu City. Through the statistical analysis, the main results were obtained as fellows : It was found that the size of green area ratio in the apartment complexes were in the order of Jugong Apt. (Korean Housing Corporation), Siyoung Apt. (City Operation), Minyoung high-rise Apt. (Private Business) and Minyoung low-rise Apt. (Private Business) complex. The highest ratio of footway and Parking area were shown in Minyoung high-rise Apt. complex. The important factors at the exterior space of apartment complex were composed by 6 major factors, importance degrees of which are Visual, Practical, Convenient, Sentimental, Recreational and Spatial factors for teenagers in orders. The residents' satisfaction degrees to the exterior space were highly correlated with the spatil organization, size of green area and quantity of trees, view, management situation, defensibility of outside noise, rest place, water landscapings by turns. In order to get more than the average satisfaction degree 18 exterior space, the green area should be occupied by 35% of the apartment complex area and more than 76% of the green area (i. e. 16% of the apartment complex area) should be planted with trees. In the Taegu City regulation, the ratio of tree composition is proposed for only the number of tree. But it was shown that the satifaction degree are more correlated with the species and afforestation of trees than the nuts her of trees in this study. therefore, the species of tree and the afforestation of tree should be considered when the landscape planning of the apartment complex begins. It was found that the ratio of afforestation to make the more desirable exterior space In the apartment complex shoule be 8 to 2 in the ratio of arbor to shrub. It was also required that 30 species of arbor and 15 species of shrub should be planted for the more desirable landscape of the apartment complex.

• 한국해안해양공학회지
• /
• 제9권4호
• /
• pp.194-200
• /
• 1997

주기적으로 요동하는 외부유동에 의해 생성되는 캐버티 주위의 2차원 천수유동은 수치적으로 연구하였다. 실험결과와 비교하기 위해 T형의 용기모델을 수치적으로 계산하여 만들었다. 수치계산에서는 캐버티의 종횡비가 전체적인 유동패턴에 크게 영향을 끼치지 않고 종횡비 2에서는 캐버티의 깊은 부분에 정체된 유동형태가 생성되는 것을 제시한다. 높은 레이놀즈 수에서 유동을 가시화 시켰을 때 나다나지 않았던 많은 와류들이 유동장을 특성화 시키고 있다. 외부지역에서의 물질전달은 실험에서 나타난 입자궤적과 잘 일치한다. 캐버티의 외부지역에 위치한 두쌍의 와류가 규모가 큰 시계방향과 반시계방향의 순환유동을 발생시키는 원인이 되는 것이 증명된 셈이다.

• 대한본초학회지
• /
• 제24권4호
• /
• pp.101-106
• /
• 2009

Objectives : We investigated the anti-aging effects on skin with 9 Repetitive steaming and fermenting herbal composition extract (FHE). Methods : Herbal composition is comprised of Panax Ginseng, Rehmannia glutinosa, Polygonum multiflorum and Polygonatum Sibiricum. They steamed and fermented with Saccharomyces cerevisiae and Lactobacillus brevis by turns at 9 times. We measured various effects related to skin aging such as scavenging activity against free radical, cell proliferation, collagen synthesis and toxicity of 9 repetitive steaming and fermenting herbal composition extract were evaluated and compared with herbal composition extract (HE). Results : As the number of steaming and fermenting cycle increased free-radical scavenging activity were increased. But cell proliferating ratio was not increased when the number of steaming and fermenting cycle. The FHE could significantly increase the collagen synthetic ratio compared with HE treated group. And, FHE was showed no toxicity at all tested concentrations. Conclusions : The results of our study propose that FHE has good anti-aging effects on skin.

• 한국병원경영학회지
• /
• 제17권1호
• /
• pp.79-112
• /
• 2012

The purpose of this study is to examine the differences of profitability based on the analysis of business and medical service performances of four hospitals in Incheon area with similar size. and to compare hospitals with the best and the worst performances and analyze the factors behind the differences. The differences could be caused by differences in medical service statistics, number of staff, and financial results, etc. The data was acquired through the homepage of the National Tax Service(financial statements for the fiscal year 2009) and the Medical Record Association of Incheon(medical service statistics for the years 2008 and 2009) along with questionnaire survey to the hospitals(personnel data for the year 2009). The results of the study are as follows. Medical profits to medical revenues ratio for the hospitals(referred as Hospital A, B, C, and D) shows, in order, C(8.2%), A(8.0%), B(7.8%), and D(7.4%). However, net income to medical revenues ratio shows otherwise: C(8.5%), D(5.8%), A(3.0%), and B(0.6%). Hospital B shows a high medical profit to revenue ratio but the lowest net income to revenue ratio due to large interest expenses. The leverage ratio of Hospital B is the highest (419.6%), resulting in a very low interest coverage ratio(1.1). On the other hand, Hospital C shows favorable results in both profit ratios, with 8.2% and 8.5% each. Hospital C has the lowest leverage ratio(53.0%) and the highest interest coverage ratio(34.9). Therefore, the results show Hospital C has the best performance while Hospital B the worst. The two hospitals(B and C) show similar results in certain areas and big differences in other areas. The area that has the biggest influence on financial results turns out leverage ratio. Hospital B shows 'very good' to 'good' results in terms of medical service statistics in general. However, the leverage ratio is too high and the liquidity ratio too low, resulting in a very low profit ratio. The results of this study have some limitations in terms of generalization as only four hospitals in Incheon area were selected for the study, resulting in a deficiency in the representativeness of the sample. Further studies with bigger sample size and deeper analysis are expected in this area.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1200-1205
• /
• 2014

The effect of nanofluids on the heat transfer performance of a pulsating heat pipe has been experimentally investigated. Water-based diamond nanofluid and aluminium oxide ($Al_2O_3$) nanofluid were tested in the concentration range of 0.5-5%. The pulsating heat pipe was constructed using clear Pyrex tubes of 1.85 mm in inner diameter in order to visualize the pulsating action. The total number of turns was eight each for heated and cooled parts. The supply temperatures of heating water and cooling water were fixed at $80^{\circ}C$ and $25^{\circ}C$ respectively. The liquid charging ratio of the nanofluid was 50-70%. The test results showed that the case of 5% concentration of diamond nanofluid showed 18% increase in heat transfer rate compared to pure water. The case of 0.5% concentration of $Al_2O_3$ nanofluid showed 24% increase in heat transfer rate compared to pure water. But the increase of $Al_2O_3$ nanofluid concentration up to 3% did not show further enhancement in heat transfer. It is also observed that the deposited nanoparticles on the tube wall played a major role in enhanced evaporation of working fluid and this could be the reason for the enhancement of heat transfer by a nanofluid, not the enhanced thermal conductivity of the nanofluid.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.255-258
• /
• 2003

The hysteresis characteristics of flux-lock reactor, which is an essential component of flux-lock type superconducting fault current limiter (SFCL), was investigated. The hysteresis loss of iron core in flux-lock type SFCL does not happen due to its winding's structure especially in the normal state. From the equivalent circuit for the flux-lock type SFCL and the fault current limiting experiments, the hysteresis curves could be drawn. Through the hysteresis curves together with the fault current level due to the inductance ratio for the 1st and 2nd winding, the increase of the number of turns in the 2nd winding of the flux-lock type SFCL had a role to prevent the iron core from saturation.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권11호
• /
• pp.547-554
• /
• 2006

The detent force of a permanent magnet linear motor(PMLM) consists of the end force and cogging force, and should be reduced for high precision purpose applications. The cogging force comes from the electromagnetic interaction between the permanent magnets and interior teeth(or the slots) of the stator, and of which the magnitude depends on the ratio of the numbers of the armature and permanent magnet poles as well as the geometrical shape of the permanent magnet and armature pole. In order to reduce the cogging force of a PMLM, this paper proposes a new configuration which has 9 permanent magnet poles and 10 armature winding slots. By theoretical investigation of the principle of cogging force generation and simulating using finite element method, the proposed PMLM configuration is proven to give much less cogging force than the conventional configuration which has 8 permanent magnet poles and 12 armature winding slots. A proper winding algorithm, modified (A, A, A) winding method, for the proposed configuration is also suggested when the proposed PMLM is operating as a 3 phase synchronous machine. A theoretical and numerical calculation shows that the proposed configuration makes slightly bigger back-emf and thrust force under same exciting current and total number of winding turns condition.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.367-376
• /
• 2016

This paper presents a cell balancing method for a single switch flyback converter with a multi-winding transformer. The conventional method using a flyback converter with a multi-winding transformer is simple and easy to control, but the voltage of each secondary winding coil might be non-uniform because of the unequal effective turn-ratio. In particular, it is difficult to control the non-uniform effect using turn-ratios because secondary coil has a limited number of turns. The non-uniform secondary voltages disturb the cell balancing procedure and induce an unbalance in cell voltages. Individual cell control by adding a switch for each cell can reduce the undesirable effect. However, the circuit becomes bulky, resulting in additional loss. The proposed method here uses the conventional flyback converter with an adjustment made to the output filters of the cells, instead of the additional switch. The magnitude of voltage applied to a particular cell can be reduced or increased according to the adjusted filter and the selected switching frequency. An analysis of the conventional converter configuration and the filter design method reveals the possibility of adequate cell balancing control without any additional switch on the secondary side.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.200-202
• /
• 2006

We investigated the operating characteristics of a flux-lock type superconducting fault current limiters according to the number of the serial connection each the superconducting element at the additive polarity winding of a transformer. This SFCL consists of two coils wound in parallel on the same iron core, and the secondary coil is connected to the elements in series. Operating characteristics can be controlled by adjusting the inductances and the winding directions of the coils. It turns ratio between the primary and the secondary coils is 63:21. The analysis of voltage, current, and resistance in serial connection each element was performed to increase the applied voltage of flux-lock type SFCL. When the applied voltage was 200/$\sqrt{3}[V_{rms}]$ with three elements connected in seres, the peak value of the line current increased up to 26,24[A]. On the other hands, resistive SFCL increased up to 36.35[A], under the same conditions. This enabled the flux-lock type SFCL to be easy to increase the capacity of power system.