• 한국군사과학기술학회지
• /
• 제18권2호
• /
• pp.154-159
• /
• 2015

This paper deals with the effect of concrete target size on penetration of projectiles. We investigated the penetration depth and residual velocity of projectiles using the 2-D axial symmetric model. Most analysis were conducted with 13 kg projectile (striking velocity: 456.4 m/s) and concrete target with compressive strength of 39 MPa. This paper provided penetration depth (or residual velocity) versus ratio D/d (target diameter, D and projectile diameter, d). When the bottom of concrete cylinder was constrained, penetration depth converged to limit depth more than the ratio D/d of 36. The residual velocity of projectile with thin concrete target were investigated. The residual velocity was converged to specific velocity more than the ratio D/d of 16.

• 한국정밀공학회지
• /
• 제11권3호
• /
• pp.105-121
• /
• 1994

In this paper, we proposed the two-parameter model for predicting the residual strength in CFRP laminated composites subjected to high velocity impact and developed and formulated it based upon Cparino's by using the ratio of impact and the normalized residual strength. Critical indentation was obtained by the statical indentation tests. Impact tests were carried out through air-gun type impact equipment with the velocities varied 30-100m/sec. Projectiles were steel balls with 5 and 7mm in diameter. Test material was carbon/epoxy. The specimens were composed of [ .+-. 45 .deg. /0 .deg. /90 .deg. ]$\_$2/ and [ .+-. 45 .deg. ]$\_$4/stacking sequences and had 0.75$\^$T/*0.26$\^$W/*100$\^$L/(mm) dimension. Results from the proposed model were in good agreement with the test data. And failure mechanism due to high velocity impact is given here to examine the initation and deveolpment of damage by fractography and ultrasonic image system. The effects of the 0 .deg. -direction ply position and the amount to damage area on the residual strength are considered here.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.256-261
• /
• 2007

The purpose of this study is to investigate the effect of shot peening on the fatigue strength and fatigue life of two kinds of aluminum alloys. The fatigue strength behavior of aluminum alloys were estimated by the stress ratio and shot velocities. The fatigue life and strength increased with increasing the test shot velocity. However, at the shot velocity range between 50m/s and 70m/s, the compressive residual stress phenomena were observed in test conditions of different shot velocity. The optimal shot velocity is acquired by considering the peak values of the compressive residual stress, dislocations, brittle striation, slip, and fisheye on the fracture surface of test specimen. It was observed from the SEM observation on the deformed specimen that the brittle striation, fisheye were showed in the intergranular fracture structure boundaries at the this velocities. Therefore, fatigue strength and fatigue life would be considered that shot velocity has close relationship with the compressive residual stress.

• Steel and Composite Structures
• /
• 제7권1호
• /
• pp.19-34
• /
• 2007

This paper presents results of a non-linear finite element analysis of axially loaded slender hollow structural section (HSS) columns, strengthened using high modulus carbon-fiber reinforced polymer (CFRP) longitudinal sheets. The model was developed and verified against both experimental and other analytical models. Both geometric and material nonlinearities, which are attributed to the column's initial imperfection and plasticity of steel, respectively, are accounted for. Residual stresses have also been modeled. The axial strength in the experimental study was found to be highly dependent on the column's imperfection. Consequently, no specific correlation was established experimentally between strength gain and amount of CFRP. The model predicted the ultimate loads and failure modes quite reasonably and was used to isolate the effects of CFRP strengthening from the columns' imperfections. It was then used in a parametric study to examine columns of different slenderness ratios, imperfections, number of CFRP layers, and level of residual stresses. The study demonstrated the effectiveness of high modulus CFRP in increasing stiffness and strength of slender columns. While the columns' imperfections affect their actual strengths before and after strengthening,the percentage gain in strength is highly dependent on slenderness ratio and CFRP reinforcement ratio, rather than the value of imperfection.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권2호
• /
• pp.155-163
• /
• 2007

고강도 콘크리트(HSC)는 화재 시 폭렬현상과 함께 부재가 취성적인 거동을 하게 되는 단점을 지니고 있다. 폭렬현상은 화재 시 $100{^{\circ}C}$이상에서 부재내부의 수분 증발로 인하여 발생한 수증기가 수밀한 콘크리트에 갇혀 발생한다. 따라서 콘크리트 강도가 증가 할수록 수밀성이 높아져 폭렬의 정도가 심해진다. 콘크리트의 폭렬을 제어할 수 있는 방안으로는 폴리프로필렌 섬유(PP섬유)를 혼입하는 방법이 가장 효율적인 것으로 보고 되었다. 본 연구에서는 콘크리트 강도와 PP섬유 함유량을 변수로 하는 기둥 실험체에 대한 내화실험과 잔존강도실험을 수행하여 폭렬현상을 관찰하고 잔존강도를 측정하였다. 그 결과 콘크리트 강도가 60MPa에서 85MPa로 증가할 때 기둥 실험체의 잔존 축 강도는 10%증가하였다. 또한, PP섬유 함유량이 0%에서 0.2%까지 증가 할수록 잔존 축강도비는 68%에서 85%까지 증가하였으나, PP섬유 함유량이 0.2%이상에서는 잔존강도의 증가가 거의 나타나지 않았다.

• 콘크리트학회논문집
• /
• 제23권4호
• /
• pp.431-440
• /
• 2011

콘크리트 구조물은 화재에 노출시 고온에 의해 내부 구조가 변화하며 보유하고 있는 강도와 변형 성능이 저하되어 최종적으로 수명이 단축하게 된다. 그 성능 저하 수준은 도달된 온도, 고온에 노출된 시간, 콘크리트의 배합, 골재의 특성 및 콘크리트 자체의 특성 등에 의해 결정된다. 이 연구는 물시멘트비, 잔골재율 및 굵은 골재의 최대 크기등의 변수에 대한 초고강도 콘크리트의 열적 거동을 평가하기 위해 실시되었다. 상온 및 $500^{\circ}C$의 온도에 대하여 초음파 속도, 동탄성 계수, 정탄성 계수 및 압축강도 시험은 ${\varnothing}100{\times}200\;mm$ 원주형 콘크리트 시험체를 사용하여 실시되었다. 결과로서 $500^{\circ}C$의 온도에서 가열된 초고강도 콘크리트의 잔존 역학적 특성은 물결합재비, 잔골재율 및 굵은 골재 최대 치수의 변화에 영향을 받는 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제13권3호
• /
• pp.195-205
• /
• 2001

본 연구는 화재에 노출된 철근콘크리트 부재의 휭 강도를 평가하기 위한 해석적 연구로서, 고온을 받는 단면에 대한 모멘트-곡률 관계를 구하는 것이다. 해석적 방법으로는 부재 단면에 대한 열전도 해석을 수행한 후 여러 가지 가열 조건에 대한 콘크리트와 철근의 응력-변형률 관계를 이용하여 모멘트-곡률 관계의 해석을 수행한다. 본 연구의 해석 결과는 다음과 같다. (1) 고온에 대한 철근콘크리트 부재의 잔존 휭 강도는 가열시간, 콘크리트 피복두께, 인장철근비의 영향을 받는다. (2) 고온을 받은 후의 잔존 휭 강도는 최소 철근비일 때는 상온시의 강도를 회복하지만, 최대 철근비의 50%일 때와 최대 철근비 일 때는 회복하지 않는 경향을 나타낸다. (3) 최대 철근비를 가진 철근콘크리트 부재는 가열 후 냉각상태에 대하여 철근이 항복하기 전에 콘크리트가 한계상태에 도달하는 경향을 나타낸다.

• International Journal of Concrete Structures and Materials
• /
• 제18권2E호
• /
• pp.103-109
• /
• 2006

Spalling is defined as damages to concrete exposed to high temperature during fire, causing cracks and localized bursting of small pieces of concrete. As the concrete strength increases, the degree of damage caused by spalling becomes more serious due to impaired permeability. It is reported that polypropylene(PP) fiber has an important role in protecting concrete from spalling, and the optimum dosage of PP fiber is 0.2%. However, this study was conducted on non-reinforced concrete specimens. The high-temperature behavior of high-strength reinforced concrete columns with various concrete strength and various quantity of PP fibers is investigated in this study. The results revealed that the ratio of unstressed residual strength of columns increased as the concrete strength increased and as the quantity of PP fiber increased from 0% to 0.2%. However, the effect of PP fiber quantity on residual strength of column was barely above 0.2%.

• Structural Engineering and Mechanics
• /
• 제66권4호
• /
• pp.477-485
• /
• 2018

This study aims to investigate the influence of individual and hybrid fiber on the local bond-slip behavior of medium and high strength concrete after exposure to different high temperatures. Tests were conducted on local pullout specimens (150 mm cubes) with a reinforcing bar embedded in the center section. The embedment lengths in the pullout specimens were three times the bar diameter. The parameters investigated include concrete type (control group: ordinary concrete; experimental group: fiber concrete), concrete strength, fiber type and targeted temperature. The test results showed that the ultimate bond stress in the local bond stress versus slip curve of the high strength fiber reinforced concrete was higher than that of the medium strength fiber reinforced concrete. In addition, the use of hybrid combinations of steel fiber and polypropylene fiber can enhance the residual bond strength ratio of high strength concrete.

• Computers and Concrete
• /
• 제31권2호
• /
• pp.111-121
• /
• 2023

The influence of material composition such as aggregate types, addition of supplementary cementitious materials as well as exposed temperature levels have significant impacts on concrete residual mechanical strength properties when exposed to elevated temperature. This study is based on data obtained from literature for fly ash blended concrete produced with natural and recycled concrete aggregates to efficiently develop prediction models for estimating its residual compressive strength after exposure to high temperatures. To achieve this, an extensive database that contains different mix proportions of fly ash blended concrete was gathered from published articles. The specific design variables considered were percentage replacement level of Recycled Concrete Aggregate (RCA) in the mix, fly ash content (FA), Water to Binder Ratio (W/B), and exposed Temperature level. Thereafter, a simplified mathematical equation for the prediction of concrete's residual compressive strength using Gene Expression Programming (GEP) was developed. The relative importance of each variable on the model outputs was also determined through global sensitivity analysis. The GEP model performance was validated using different statistical fitness formulas including R², MSE, RMSE, RAE, and MAE in which high R² values above 0.9 are obtained in both the training and validation phase. The low measured errors (e.g., mean square error and mean absolute error are in the range of 0.0160 - 0.0327 and 0.0912 - 0.1281 MPa, respectively) in the developed model also indicate high efficiency and accuracy of the model in predicting the residual compressive strength of fly ash blended concrete exposed to elevated temperatures.