The principal objective of this study was to investigate the quality characteristics of Yukwa prepared with chlorella powder. The tested concentrations of chlorella powder were 0, 1, 2, and 3%. As more chlorella powder was added, spread ratio, moisture content, and volume increased, whereas L-value and a-value decreased and b-value increased. The hardness of Yukwa made with 3% chlorella powder was highest among the samples. The results of the sensory evaluation test show that Yukwa with 1% chlorella powder was significantly more preferable in term sof overall acceptability. The acid value and peroxide values were lower in Yukwa prepared with chlorella powder than the control. Yukwa prepared with chlorella powder showed strong inhibition of lipid oxidation. Thiobarbituric values were lower in Yukwa prepared with 2% chlorella powder compared to Yukwa prepared with 1% and 3% chlorella powders and control Yukwa. These results suggest that chlorella powder can be applied to Yukwa for high quality and functionality.
단감빵을 개발하기 위하여 강력분을 단감가루로 대체할 수 있는 적정 비율을 결정하고, 단감가루 대체 비율별 단감빵의 물리적, 관능적 검사를 통하여 단감빵의 품질 특성을 살펴본 결과는 다음과 같다. 강력분 대신 단감가루를 5, 10, 15, 20% 대체했을 때 단감가루의 비율이 증가함에 따라 수분 흡수율과 빵의 부피는 감소하고 빵의 무게는 증가하였다. 식이섬유나 비타민 A, $\beta$-카로틴, 비타민 C 함량은 밀빵보다 단감빵에 훨씬 많았으며 단감가루 대체율이 증가할수록 증가하였다. 색도는 단감가루의 비율이 증가할수록 빵 껍질색에서 L, b값은 감소하였지만 a값은 증가하였고, 빵 내부색에서는 L값만 감소하고 a, b값은 증가하였다. 기호도 검사에서 외관을 제외한 풍미, 조직감, 전반적인 기호도에서는 10% 단감빵이 밀빵보다 선호되었고, 맛에서는 5% 단감빵이 가장 점수가 높았고, 10% 단감빵이 그 다음으로 나타났다. 관능검사QDA결과 단감가루 대체 비율이 증가할수록 껍질색, 내부색, 단감향, 갈변취, 단맛, 뒷맛, 탄력성, 점착성은 증가하였다. 단단함은 단감빵보다 밀빵이 높은 반면 촉촉함은 단감빵이 높았다. 전반적인 기호도는 단감가루를 10%, 대체한 경우가 가장 높고 과 다음이 5% 대체한 단감빵, 대조구 밀빵 순으로, 대조구 밀빵보다 단감빵의 기호도가 좋다고 평가되었다.
The purpose of this study was to find out the factors affecting birth sex ratio which had revealed alarmingly higher in recent years. This study was conducted to get hold of the basic data such as the sex ratio of live births which had been delivered at 5 general hospitals in Taegu from 1982 to 1986. And author chose Dongsan Medical Center from those 5 hospitals for further detailed study, and reviewed 1,286 medical records of mothers who had birth in each February and March from 1984 to 1987. Of these 1,286 deliveries, 30 cases were twin deliveries, which added the total children numbers to 1,316. The findings of this study were as follows: The average of birth sex ratio( 114.5) for 5 years at five general hospitals in Taegu was slightly higher than the traditional birth sex ratio( 102-107) and the highest was 123.4 in 1985. There was no significant difference in birth sex ratio by mother's educational level, her religion nor father's occupation. The birth sex ratio of the cases whose mother was above 35 years old was significantly high(400.0), that of the cases who were born to the mothers who had more than 3rd parity was significantly high(309.5), and that of the cases whose mother had more than two daughters and no son was also significantly high (330.7). The birth sex ratio of the cases who did not have ultrasonogram on their prenatal visits was 87.8. In contrast to this, that of the cases who had ultrasonogram was significantly higher( 135.5). Of the mothers who have more than two daughters and no son' 80.4% (45 cases) had ultrasonogram and their newborn's birth sex ratio was significantly high(542.9). Of the cases who were born to more than 3rd parity mothers, 75.6%(65 cases) of their mothers had ultrasonogram and their sex ratio was significantly high(441.6). It was revealed by this study that the birth sex ratio is changed to significantly high due to sex confirmation of the fetus by ultrasonogram. Thus it is recommended that the value related to having equality of sexes must be ingrained by changing the various social systems and value systems which is now aggrevating the son preference and should provide controlling system which can prohibit the ultrasonogram for sex confirmation only.
The glass-ceramics was prepared with the scoria(CaO-MgO-Al2O3-SiO2 system) of the locally occurring volcanic ejecta containing 10-13w/o of (FeO+Fe2O3) by melting at 140$0^{\circ}C$ for 4 hours and thermally treated for nucleation and crystallization. The sucrose was added to the scoria to adjust the Fe2+/Fe3+ ratio during the melting process. The addition of 1-2w/o of sucrose showed the glass-ceramics body with the finest particle developed and dispersed over the entire range. It is concluded that the impurity content of iron oxide and titanium oxide play the most-influencial effect on the crystallization. When 1-2w/o of sucrose was added to the scoria, the value of Fe2+/Fe3+ ratio was 0.93-1.32 and showed the best result of crystallization. The nucleation temperature and time were calculated by the measurements of exothermic peak temperatures of DTA for quenched and thermally treated glasses. The nucleation temperature of scoria glass without the addition of sucrose was estimated as 75$0^{\circ}C$, but the addition of sucrose by 2w/o showed the nucleation temperature 6$25^{\circ}C$. The nucleation time was calculated with the same DTA curves. The nucleation times estimated were about 150min. for both of glasses without and with sucrose added. Finally, the activation energies for crystallization were calculated with the DTA data. The calculated activation energies were 143 Kcal/mole for the glass without addition of sucrose and 90Kcal/mole, 87Kcal/mole, 85Kcal/mole and 71Kcal/mole for the glasses of 1w/o, 2w/o, 3w/o and 4w/o addition respectively.
The red ginseng powder was added to Yackwa dough as ratio to 0%, 2%, 4%, 6% and 8%, respectively to know effect of red ginseng powder on Yackwa quality and preservation. The expansion, color, texture and preference characters were investigated at 0,2 and 4 weeks, respectively. The peroxide and acid value were also measured. The 4% addition increased greatly expansion rate. In color test, L value lowed at addition of red ginseng powder and at long storage period. the b value lowed as the addition was increased, but a value was not affected by the addition of red ginseng powder. In mechanical texture test, addition of red ginseng powder had a tendency to show low cohessivness, springness, gumminess while hardness increased. The springness, brittleness and cohessivness decreased while hardness increased at long storage period. In sensory test, surface color, bitterness and red ginseng flavor were recognized strong by addition of red ginseng powder but oily taste, crispness, softness and overall preference were weak. The surface color and red ginseng flavor were strong at long storage period but sweetness, softness and overall preference decreased, respectively. The peroxide value increased at long storage period and decreased after 6 week. The 2% and 4% addition showed lower peroxide value compared to other treatment. The acid value increased at early storage period, but did not change after 4 weeks.
This study was conducted to investigate the effective ratio of Sulgidduk to steaming chesnut powder. I measured the sensory and mechanical characteristics, moisture content and color values of Sulgidduk added by different amount 4 of types of steaming chestnut powder; 0% (Control-0 group), 1% (CP-1 group), 2% (CP-2 group), 3% (CP-3 group), 4% (CP-4 group). Moisture content of Sulgidduk with steaming chestnut powder ranged from 38.53% to 46.05%. The L-value and b-value of the color decreased with an increase in steaming chestnut powder; however, a-value of the color decreased with an increase in steaming chestnut powder. As a result of analysis the texture of Sulgidduk steaming chestnut powder, it's hardness, springiness was increased. According to the sensory evaluation, CP3 had the highest values in texture and overall acceptability. Based on the result, it's considered that the most desirable ratio is steaming chestnut powder CP3. The results of the study supported the benefits of steaming chestnut powder supplementation in Sulgidduk in the aspects of taste and functionality. The degree of further increase in Sulgidduk with steaming chestnut powder without causing an adverse quality effect, remain for future study.
A cylindrical constant-volume combustion chamber was used to investigate the flow characteristics at the spark electrode gap and the combustion characteristics of an inhomogeneous charge methane-air mixture under several parameters such as stratified pattern, initial charge pressure, ignition time and the excess air ratio of the initial charge mixture. Flow characteristics including mean velocity and turbulence intensity were analyzed by a hot-wire anemometer. The combustion pressure development, measured by a piezo-electric pressure transducer, was used to investigate the effect of initial charge pressure, excess air ratio and ignition times on combustion pressure and combustion duration. It was found that the mean velocity and turbulence intensity had the maximum value around 200-300 ms and then decreased gradually to near-zero value at 3000 ms. For the stratified patterns, the combustion rate under the rich injection (RI) condition was the fastest. Under the initial charge conditions, the second mixture was accompanied by an increase in the combustion rate, and that the higher the mass which is added in the second stage injection, the faster the combustion rate.
Silicon oxide thin films have been deposited by plasma-enhanced chemical vapor deposition in SiH4 and N2O plasma along the variation of the gas flow ratio. Optical emission spectroscopy was employed to monitor the plasma and ellipsometry was employed to obtain refractive index of the deposited thin film. The atomic ratio of Si, O, and N in the film was obtained using XPS depth profiling. Fourier Transform Infrared Spectroscopy was used to analyze structures of the films. RI decreased with the increase in N2O/SiH4 gas flow ratio. We noticed the increase in the Si-O-Si bond angles as the N2O/SiH4 gas flow ratio increased, according to the analysis of the Si-O-Si stretching peak between 950 and 1,150 cm-1 in the wavenumber. We observed a correlation between the optical emission intensity ratio of (ISi+ISiH)/IO. The OES intensity ratio is also related with the measured refractive index and chemical composition ratio of the deposited thin film. Therefore, we report the added value of OES data analysis from the plasma related to the thin film characteristics in the PECVD process.
Journal of Advanced Marine Engineering and Technology
/
제33권5호
/
pp.672-678
/
2009
Acoustic Emission (AE) technique is a non-destructive testing method and widely used for the early detection of faults in rotating machines in these days, because the sensitivity of AE transducers is higher than normal accelerometers. So it can detect low energy vibration signals. The faults in the rotating machines are generally occurred at bearings and gearboxes which are the principal parts of the machines. It was studied to detect the bearing faults by envelop analysis in several decade years. And the researches showed that AE had a possibility of the application in condition monitoring system(CMS) using the envelope analysis for the rolling bearing. And peak ratio (PR) was developed for expression of the bearing condition in condition monitoring system using AE. Noise level is needed to reduce to take exact PR value because the PR is calculated from total root mean square (RMS) and the harmonics peak levels of the defect frequencies of the bearing. Therefore, in this paper, the discrete wavelet transform (DWT) was added in the envelope analysis to reduce the noise level in the AE signals. And then, the PR was calculated and compared with general envelope analysis result and the result of envelope analysis added the DWT. In the experiment result about inner fault of bearing, defect frequency was difficult to find about only envelop analysis. But it's easy to find defect frequency after wavelet transform. Therefore, Envelop analysis added wavelet transform was useful method for early detection of default in signal process.
The purpose of this study is to obtain low-emission and high-efficiency in LPG engine with hydrogen enrichment. The objective of this paper is to clarify the effects of hydrogen enrichment in LPG fuelled engine on exhaust emission, thermal efficiency and performance. The compression ratio of 8 was selected to avoid abnormal combustion. To maintain equal heating value of fuel blend, the amount of LPG was decreased as hydrogen was gradually added. The relative air-fuel ratio was increased from 0.8 to 1.3, and the ignition timing was controlled to be at MBT (minimum spark advance for best torque)
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.