• Geomechanics and Engineering
• /
• v.15 no.1
• /
• pp.695-710
• /
• 2018

Formation of a soil plug in an open-ended pile is a very important factor in determining the pile behavior both during driving and during static loading. The degree of soil plugging can be represented by the incremental filling ratio (IFR) which is defined as the change in the plug length to the change of the pile embedment length. The experimental tests carried out in this research contain 138 tests that are divided as follows: 36 tests for single pile, 36 tests for pile group ($2{\times}1$), 36 tests for pile group ($2{\times}2$) and 30 pile group ($2{\times}3$). All tubular piles were tested using the poorly graded sand from the city of Karbala in Iraq. The sand was prepared at three different densities using a raining technique. Different parameters are considered such as method of installation, relative density, removal of soil plug with respect to length of plug and pile length to diameter ratio. The soil plug is removed using a new device which is manufactured to remove the soil column inside open pipe piles group installed using driving and pressing device. The principle of soil plug removal depends on suction of sand inside the pile. It was concluded that the incremental filling ratio (IFR) is changed with the changing of soil state and method of installation. For driven pipe pile group, the average IFR for piles in loose is 18% and 19.5% for L/D=12 and 15, respectively, while the average of IFR for driven piles in dense sand is 30% and 20% for L/D=12 and L/D=15 respectively. For pressed method of pile installation, the average IFR for group is zero for loose and medium sand and about 5% for dense sand. The group capacity increases with the increase of IFR. For driven pile with length of 450 mm, the average IFR % is about 30.3% in dense sand, 14% in medium and 18.3% for loose sand while when the length of pile is 300 mm, the percentage equals to 20%, 17% and 19.5%, respectively.

• Journal of the Korean Chemical Society
• /
• v.13 no.1
• /
• pp.96-101
• /
• 1969

Jalapin purified from the tubers of the sweet potato (Ipomoea batatas) was deacylated and subjected to structural elucidation. Complete and degraded acid hydrolyses indicated the presence of L-rhamnose, D-fucose and D-glucose in the molar ratio of 1: 1: 1 and in the increasing order of acid-stability. While two moles of periodate were consumed per mole of the product, D-glucose survived in the oxidation. The following structure was, therefore, proposed tentatively for the deacylated jalapin: L-$Rha_f$-(1${\to}$4)-D-$Fuc_p$-(1${\to}$3)-D-$Glu_p$-(1${\to}$11)-jalapinolic acid.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.89-92
• /
• 2001

This study aims at investigating the relationship between dispersion coefficient ratio to molecular diffusion coefficient (D$_{l}$ /D$_{m}$) and Peclet number (Pe) for multi-solute system in non-Darcian flow regime. Existing understanding on solute dispersion is primarily derived from one-solute system in Darcian flow regime. We found that solute dispersion in rock fractures can be characterized by the mechanism of both macrodispersion and Taylor dispersion, even for non-Darcian f]ow domain. For the Darcian flow regime even different solutes lead to the same D$_{l}$ /D$_{m}$ at same Pe. However, as the flow becomes non-Darcian, solute with a higher molecular diffusion coefficient result in higher D$_{l}$ /D$_{m}$ at tile same Pe than that with a lower diffusion coefficient.cient.

• Resources Recycling
• /
• v.23 no.5
• /
• pp.21-27
• /
• 2014

A study on the solvent extraction for the recovery of Li from lithium-containing waste solution was investigated using $D_2EHPA$ as an extractant. The experimental parameters, such as the pH of the aqueous solution, concentration of extractant and phase ratio were observed. Experimental results showed that the extraction percentage of Li was increased with increasing the equilibrium pH. More than 50% of Li was extracted in eq. pH 6.0 by 20% $D_2EHPA$. From the analysis of McCabe-Thiele diagram, 95% of Li was extracted by four extraction stage at phase ratio(O/A) of 3.0. Stripping of Li from the loaded organic phases can be accomplished by sulfuric acid as a stripping reagent and 90 ~ 120 g/L of $H_2SO_4$ was effective for the stripping of Li. Finially, Li was concentrated about 11.85 g/L by continuous stripping process, and then lithium carbonate was prepared by precipitation method.

• Clinical and Experimental Pediatrics
• /
• v.45 no.5
• /
• pp.654-658
• /
• 2002

Purpose : Endocrine and immune systems are connected and interdependent. Adrenal glands play an important role in this network and control the balance between serum levels of dehydroepiandrosterone sulfate(DHEAS) and cortisol. These steroids have an antagonistic effect on the T cell progression into Th1 and Th2 cells and on the induction of correlated interleukins. Therefore we evaluated the role of adrenal androgen and cortisol as immune modulators in Kawasaki disease( KD) with changes of T cell immunity. Methods : From April to August in 2001, we examined serum DHEAS and 24 hour urine free cortisol(F) before administration of immunoglobulin and steroids by radioimmunoassay in 14 KD patients. It's clinical severity was determined by Harada score and coronary lesion. Results : The age of the patient group ranged from 4 months to 4 years; its average age was 2.3 years. Three patients(21.4%) were below 1 year, 2(14.3%) between 1 and 2 years, 5(35.7%) between 2 and 3 years, 4(28.6%) between 3 and 4 years of age. Male to female ratio was 1:1.3. DHEAS was significantly decreased in patients($11.1{\pm}6.0{\mu}g/dL$) more than controls($81.6{\pm}13.3{\mu}g/dL$)(P<0.05). Twenty-four hour urine free cortisol was significantly increased in patients($36.9{\pm}21.9{\mu}g/dL$) more than controls($13.6{\pm}5.5{\mu}g/dL$)(P<0.05). Ratio of DHEAS/F was decreased remarkably in patients($0.33{\pm}0.20$) more than controls($6.65{\pm}2.56$)(P=0.016). There was no difference between ratio of DHEAS/F and Harada score, but its ratio was very low in patients with coronary aneurysm. Conclusion : These data demonstrate that there are changes of DHEAS and cortisol in acute stage of KD and the dis-equilibrium between two steroids may be relevant in the T cell immune response induction of Kawasaki disease. These changes support the use of DHEAS/F ratio as one of the predictive factors of coronary arteries complication.

• Journal of Environmental Science International
• /
• v.19 no.7
• /
• pp.871-877
• /
• 2010

The objectives of this study were to compare growth of Pllioblastus pygmaed and soil characteristics as affected by difference of soil thickness and mixture ratio in shallow-extensive green roof module system, and to identify the level of soil thickness and mixture as suitable growing condition to achieve the desired plants in green roof. Different soil thickness levels were achieved under 15cm and 25cm of shallow-extensive green roof module system that was made by woody materials for $500{\times}500{\times}300mm$. Soil mixture ratio were three types for perlit: peatmoss: leafmold=6:2:2(v/v/v, $P_6P_2L_2$), perlit: peatmoss: leafmold=5:3:2(v/v/v, $P_5P_3L_2$) and perlit: peatmoss: leafmold=4:4:2(v/v/v, $P_4P_4L_2$). On June 2006, Pllioblastus pygmaed were planted directly in a green roof module system in rows. All treatment were arranged in a randomized complete block design with three replication. The results are summarized below. In term of soil characteristics, Soil acidity and electric conductivity was measured in pH 6.0~6.6 and 0.12dS/m~0.19dS/m, respectively. Organic matter and exchangeable cations desorption fell in the order: $P_4P_4L_2$ > $P_5P_3L_2$ > $P_6P_2L_2$. $P_6P_2L_2$ had higher levels of the total solid phase and liquid phase, and $P_4P_4L_2$ had gas phase for three phases of soil in the 15cm and 25cm soil thickness. Although Pllioblastus pygmaed was possibled soil thickness 15cm, there was a trend towards increased soil thickness with increased leaf length, number of leaves and chlorophyll contents in 25cm. The growth response of Pllioblastus pygmaed had fine and sustain condition in order to $P_6P_2L_2$ = $P_5P_3L_2$ > $P_4P_4L_2$. However, The results of this study suggested that plants grown under $P_4P_4L_2$ appear a higher density ground covering than plants grown under $P_6P_2L_2$. Collectively, our data emphasize that soil thickness for growth of Pllioblastus pygmaed were greater than soil mixture ratio in shallow-extensive green roof module system.

• Microbiology and Biotechnology Letters
• /
• v.30 no.4
• /
• pp.373-379
• /
• 2002

By using DL-acetonitrile as enzyme inducer, 90 bacteria were isolated from a field soil. Among the isolated strains, the strain WJ-003 showed the highest activity for production of D-lactic acid from DL-lactonitrile, and was partially identified as Pseudomonas sp. The production condition of D-lactic acid from DL-lactonitrile using resting cells as an enzyme source was optimized as follows: the reaction mixture contained 10 mM of DL-lactonitrile, 20 g of wet cells in 11 of 20 mM potassium phosphate buffer (pH 7.0) and the reaction was carried out at $30^{\circ}C$. After 18 h of reaction, 0.843 g/l of D-lactic acid was produced which corresponded to a conversion ratio of 93.7% and an optical purity of 99.8%. Additionally, when 10 mM of DL-lactonitrile was added once more to the reaction mixture at 14 h, 1.64 g/1 of D-lactic acid was produced after 28 h. In this experiment, the conversion ratio was 91.1% and optical purity 99.8%.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.124-129
• /
• 2003

In case that the mixing weight ratio of waste form between boric acid and paraffin was 3.3/l, which had been adopted in the concentrate waste drying system (CWDS) of domestic nuclear power plants. Using several specimens with different diameters and heights, 50/100mm specimens. compressive strength were measured. The experiment result showed that the small diameter specimens of compressive strength are increased more than large diameter specimens. (d=50＞75＞100mm) The average compressive strength of specimens showed that the range from 22.43 $\kg/textrm{cm}^2$ to 38.57$\kg/textrm{cm}^2$ (NRC standard$\geq$4.1 $\kg/textrm{cm}^2$). NRC standard is recommended that the compressive strength test specimens be right circular cylinders, 2 to 3 inches in diameter, with a height-to-diameter(H/D) ratio of approximately two. and compressive strength were increased more than large loading rate. As test result, this conditions are a good agreement, and estimated.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3617-3627
• /
• 2023

This study presents a method to solidify spent ion-exchange resin (IER) in a metakaolin-based geopolymer and shows results of mechanical strength, immersion, leaching, irradiation, and thermal cycling tests for waste acceptance criteria (WAC) to repository. The geopolymer waste form with 20 wt% of simulated spent IER met the WAC in South Korea (ROK), and the leaching tests of various sized-waste forms up to 15.0 × 30.0 cm and waste loadings up to 20 wt% for 1-5 d and 1-90 d achieved a leachability index, L_i > 6. In a leaching test for 5 d, the cumulative fraction leached (CFL) for Cs, which leached the most, was linearly correlated with the square root of leaching time for all waste forms, and L_i increased as the size of the waste form increased. The CFL was also correlated with elapsed time in the 90 d leaching test. The correlations among CFL, time, and volume-to-surface area ratio of waste forms used to estimate the L_i of Cs of a 200-L sized geopolymer with 15 wt% IER showed the L_i values as 14.73 (5 d) and 17.71 (90 d), respectively, indicating that the large-sized geopolymer waste form met the WAC.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.11
• /
• pp.1510-1518
• /
• 2010

The study was conducted to evaluate the effect of lighting schedule and nutrient density on growth performance, carcass traits and meat quality of broiler chickens. A total of 576 day old Arbor Acre male chickens was used with a $4{\times}2$ factorial arrangement. The four lighting schedules were continuous (23 L:1 D, CL), 20 L:4 D (12 L:2 D:8 L:2 D), 16 L:8 D (12 L:3 D:2 L:3 D: 2 L:2 D) and 12 L:12 D (9 L:3 D:1 L:3 D:1 L:3 D:1 L:3 D) and provided by incandescent bulbs. The two nutrient densities were high (H, starter diet: 13.39 MJ/kg apparent metabolisable energy (AME), 23.00% crude protein (CP); finisher diet: 13.39 MJ AME/kg, 19.70% CP) and low energy and protein level (L, starter diet: 12.03 MJ AME/kg, 20.80% CP; finisher diet: 12.14 MJ AME/kg, 18.30% CP). Houses with dark curtains and solid sidewalls were used. Chickens were randomly allocated to the 8 treatments with each treatment comprising 6 replicates of 12 chickens. Feed and water were available ad libitum. Lighting schedules showed no difference (p>0.05) in growth performance at the end of the experiment. 12 L:12 D significantly reduced (p<0.05) the concentration of malondialdehyde (MDA) compared to 23 L:1 D treatment. Intermittent lighting (IL) schedules produced higher protein content (p<0.001) in breast meat. Birds on high density diets had higher body weight (BW), feed intake (FI) (p<0.001), and feed conversion ratio (FCR) (p<0.001) throughout the experiment with the exception of 36 to 42 d. High nutrient density increased (p<0.05) abdominal fat, decreased (p<0.05) the moisture loss of meat, and reduced percentage of wings and legs. There was a significant lighting schedule${\times}$diet interaction (p<0.001) on FCR for days 8 to 14 and 15 to 21. Results indicated that IL can give similar growth performance in comparison with CL, meanwhile with positive effects on meat quality by increasing protein content and decreasing the concentration of MDA. High nutrient density resulted in greater growth performance.