• Earthquakes and Structures
• /
• v.26 no.3
• /
• pp.219-228
• /
• 2024

This study examines damping modification factors (DMFs) of elastic input energy spectra corresponding to a set of 116 earthquake ground motions. Mean input energy per mass spectra and mean DMFs are presented for both considered ground motion components. Damping ratios of 3%, 5%, 10%, 20%, and 30% are used and the 5% damping ratio is considered the benchmark for DMF computations. The geometric mean DMFs of the two horizontal components of each ground motion are computed and coefficients of variation are presented graphically. The results show that the input energy spectra-based DMFs exhibit a dependence on the damping ratio at very short periods and they tend to be nearly constant for larger periods. In addition, mean DMF variation is obtained graphically for also the damping ratio, and mathematical functions are fitted as a result of statistical analyses. A strong correlation between the computed DMFs and the ones from predicted equations is observed.

• Korean Journal of Organic Agriculture
• /
• v.27 no.2
• /
• pp.225-235
• /
• 2019

The present study hypothesized that ratio between carcass traits components could be applied for the understanding of yield index in Hanwoo steer. A thousand data was generated based on average carcass weight (CW), loin area (LA) and backfat thickness (BT) of Hanwoo steer in December 2018 for analysis 1. Then yield index (YI) was calculated using newly established yield index equation. The correlation between yield index and each carcass traits was visualized. In the interaction between carcass traits components (LA, CW, BT) and YI, only the interactions including BT showed a regular pattern to YI. Then changes of YI according to ratio of carcass traits components were investigated. The observed interactions between LABT and CWBT were similar with Monod equation model. The changes of YI to LABT and CWBT were fitted to Monod equation, and yield constants (K1 for LABT; K2, CWBT) of each equation were calculated as 0.47 and 2.20, respectively. Carcass traits from 5 commercial Hanwoo steer farm were then employed in the second analysis. Yield constants of each farm were estimated. In estimation, R² value for K1 (LABT) showed greater than the K2 (CWBT). Finally, each farm was plotted based on their K1 and K2 values and it was found that greater yield index of Hanwoo steer was found as increased K1 and K2. As conclusion, the present study suggested the possibility of K1 and K2 values for understanding of yield grade equation and their application in the evaluation of new model for yield grade estimation and feeding strategy.

• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.74-82
• /
• 1998

The grain boundary etching method as a technique for assessing degradation of structural materials used at elevated temperature has received much attention since it is simple, inexpensive and easy to apply to real plant components. In this study, the technique is applied to some aged petroleum and chemical plant components such as reactors and drums. As a degradation parameter, intersection number ratio ($N_i/N_o$), is employed. The intersection number ratio ($N_i/N_o$) is defined as the ratio of intersection number ($N_i$) obtained from 5-minute picric acid etched surface to the number ($N_o$) obtained from Nital etched surface. In order to study degradation level, several relationships were measured such as the correlation between shift in ductile brittle transition temperature, $({\Delta}DBTT)_{sp}$ and intersection number ratio, ($N_i/N_o$) and the correlation between the measured ($N_i/N_o$) values and Larson-Miller Parameter values.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.2
• /
• pp.141-148
• /
• 2018

This study evaluated the performance characteristics of varied electrolyte species and amounts in a molten carbonate fuel cell (MCFC). Coin-type MCFCs were used at the condition of $650^{\circ}C$ and 1 atm. In order to measure the effects of varied electrolyte species and amounts, electrolytes of $(Li+K)_2CO_3$ and $(Li+Na)_2CO_3$ were selected and the amounts of 1.5 g, 2.0 g, 3.0 g, and 4.0 g were used. Insignificant performance differences were observed in the cell using different electrolytes, but the cell performance was sensitive to the amount of the electrolyte used. The pore-filling ratio (PFR), a ratio of pore filling in the components by the liquid carbonate electrolytes, was used to determine the optimum performance range. Consequently, 77% PFR demonstrated the optimum performance for both electrolytes. Thus, the MCFC had a permissible but narrow optimum performance range. The remaining amounts of electrolyte in the cells were determined using the weight reduction ratio (WRR) method after several hours of cell operation. The WRR used the relationship between the initial loaded amount of electrolyte and weight reduction of components in 10 wt% acetic acid. The relationships were linear and identical between the two electrolyte species.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.1
• /
• pp.13-30
• /
• 1993

The purpose of this study was to present data to the landscape planning and design through analyzing correlation between visual preference of users and nonusers and the landscape of hole in golf couses. Stimulus objects were selected from the 18 holes in Tae-gu Country Club. Preference value was judged through photo simulation by 35 subjects photographed at Tee and Interpoint (IPI, IP2), and classified into three landscape types and nine landscape components from photo analysis by researcher. For test of difference between groups toward each stimulus, t-test was used, and Duncantest, Correlation analysis for finding out correlation between preference degree and the landscape of each hole. The results of this study were as follows: As a result of analysis of preference value between groups for each hole, it has been shown that there was scarcely difference with each other. Form the relation between preference degree and spacial structure of hole, the holes making up a superior preference group have been shown that the greater part of the holes had a downward slope or a gentle slope mostly and then a visible ratio of fairway was high, and had diversified scenery by a lotus pond, a solitary planting tree, the roll of a fairway, facilities for convenience, etc. The holes making up a low-ranking preference group have been shown that the greater part of the holes had upward slope or a similar slope to it and had characteries of the bad condition of lawn, the nearby factories and odors, the monotonous scenery of a fairway, an unreasonable mixing of holes, etc. From the relation between preference degree and landscape components forming hole, it has been shown that the preference degree between users and nonusers had positive correlation to the occupied ratio of space of landscape components at Tee and Approach. At Tee, it has been shown that the preference degree of two groups were related with a lawn surface of fairway negatively, a lotus pond, a sky positively, and the preference degree of nonusers was related with iron-top for electric transmission positively. At Approach, it has been shown that the preference degree of two groups were related with iron-top for electric transmission negatively, and the preference degree of nonusers was related with a building positively. From the relation between preference degree group to each hole and the occupied ratio of space of landscape types, it has been shown that the constituent ratio of a high-ranking group was 1:2.4:2.2 and a low-ranking group was 1:4.1:5.1 among vertical type, horizontal type and background at Tee, but the constituent ratio of space of a high-ranking group was similar to a low-ranking group at Approach.

• Korean Journal of Health Education and Promotion
• /
• v.33 no.5
• /
• pp.59-70
• /
• 2016

Objectives: This study aimed to investigate the association between smoking cessation and metabolic syndrome components in Korean male and to clarify how long metabolic syndrome and its components remains after smoking cessation. Methods: A total of 4,408 participants from the Korean National Health and Nutrition Examination Surveys were included in this cross-sectional study. Smoking status was categorized into three groups, current-smoker, ex-smoker and non-smoker. Also smoking cessation period was categorized into three groups, less than 5 years, 5 years to 15 years and more than 15 years. Results: Smoking cessation were associated with prevalence of metabolic syndrome and its components. The multi-variate adjusted odds ratio for the prevalence of metabolic syndrome was 1.68(1.22-2.31) for smoker, 1.04(0.74-1.46) for ex-smoker, as compare with non-smoker; adjusted odds ratio for the prevalence of hypertriglyceride 2.17(1.77-2.66) for smoker, 1.27(1.02-1.59) for ex-smoker and high waist circumference 1.36(0.98-1.88) for smoker, 1.07(0.78-1.48) for ex-smoker, as compare with non-smoker. Conclusions: Smoking cessation in Korean male reduced odds ratio for the prevalence of metabolic syndrome and its 4 components except for hypertension.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2939-2948
• /
• 2020

This paper presents an analytic solution procedure of the rotationally restrained hinged-hinged beam subjected to transverse motions at supports based on EBT (Euler-Bernoulli beam theory). The EBT solutions are compared with the solutions based on TBT (Timoshenko beam theory) for a wide range of the rotational restraint parameter (kL/EI) of slender beams whose slenderness ratio is greater than 100. The comparison shows the followings. The internal loads such as bending moment and shearing force of an extremely thin beam obtained by EBT show a good agreement with those obtained by TBT. But the discrepancy between two solutions of internal loads tends to increase as the slenderness ratio decreases. A careful examination shows that the discrepancy of the internal loads originates from their dynamic components whereas their static components show a little difference between EBT and TBT. This result suggests that TBT should be employed even for slender beams to consider the rotational effect and the shear deformation effect on dynamic components of the internal loads. The influence of the parameter on boundary conditions is examined by manipulating the spring stiffness from zero to a sufficiently large value.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.155-162
• /
• 1999

reliability from components reliability. In this case, it assumes that components failure is mutually independent, but it may not true in real systems. In this study, the mean cost per unit time is computed as the ratio of mean life to the mean cost. The mean life is obtained by the reliability function under power rule model. The mean cost is obtained by the mathematical model based on the inspection interval. A heuristic method is proposed to determine the optimal number of redundant units and the optimal inspection interval to minimize the mean cost per unit time. The assumptions of this study are as following : First, in the load-sharing k-out-of-n:G system, total loads are applied to the system and shared by the operating components. Secondly, the number of failed components affects the failure rate of surviving components as a function of the total load applied. Finally, the relation between the load and the failure rate of surviving components is set by the power rule model. For the practical application of the above methods, numerical examples are presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.1
• /
• pp.22-31
• /
• 1997

The grain boundary etching method as a method for assessing degradation of structural materials has received much attention because it is simple, inexpensive and easy to apply to real components. In this study, the effectiveness of the method is verified by successfully applying the technique to in-service components of aged fossil power plants such as main steam pipes, boiler headers an turbine rotors. A new degradation parameter, intersecting number ratio (N$_{1}$/N$_{0}$), is employed. The intersecting number ratio (N$_{1}$/N$_{0}$) is defined as the ratio of intersection number (N$_{1}$) obtained from 5-minute picric acid etched surface to the number (N$_{0}$) obtained from nital etched surface. Two kinds of test materials, 2.25Cr-1Mo steel and 1Cr-1Mo-0.25V steel, were artificially thermal-aged at 630.deg. C in different levels of degradation., (N$_{1}$/N$_{0}$) were measured. And, correlations between the measured values and LMP values calculated from aging temperature and aging time were sought. To check the validity of the correlations obtained in laboratory, similar data were measured from service components in four old Korean fossil power plants. These on-site measurement data were in good correlation with those obtained in the laboratory.oratory.

• Korean journal of food and cookery science
• /
• v.33 no.2
• /
• pp.190-197
• /
• 2017

Purpose: The purpose of this paper was to analyze the physicochemical properties related to peeling rate of Korean chestnut. Methods: Analyses were carried out for weight, thickness, polyphenol, amino acid and peeling ratio for Korean chestnut. The correlation between these physicochemical components and peeling ratio of chestnut was measured. Results: The average of thickness for inner shell and outer shell was 0.66 mm and 0.93 mm, respectively. The average peeling ratio was 77.51%. A significant negative correlation was found between peeling ratio and thickness of the inner shell ($r=-0.80^{***}$, p<0.001). Analysis for the polyphenol composition of inner shell by HPLC was carried out and peaks 2 ($r=-0.56^*$, p<0.05), 11 ($r=-0.68^{**}$, p<0.01), 14 ($r=-0.52^*$, p<0.05), 28 ($r=-0.66^{**}$, p<0.01) showed a significant negative correlation with the peeling ratio. Conclusion: Thickness of chestnut inner shell was determined as the most influential factors of peeling.