• 대한원격탐사학회지
• /
• 제31권3호
• /
• pp.227-244
• /
• 2015

최근 위성 Synthetic Aperture Radar (SAR) 영상의 해상도가 개선됨에 따라 이에 대한 수요가 증가할 것으로 보이며 향후 새로운 응용시장으로 성장할 것으로 예측되고 있다. 특히, 화산이나 지진과 같은 자연 재해에 대한 예측이나 지형의 미세한 변화를 탐지하기 위한 용도로 SAR 영상의 활용도가 증가하고 있다. 기존의 변화탐지 알고리즘을 고해상도 SAR 영상에 적용할 경우, 영상간의 기하학적 구조, 스펙클의 영향 등으로 변화탐지 정확도가 저하될 수 있다. 또한, SAR 영상의 경우 지형적 특성에 따라 영상의 통계적 분포가 다르므로 영상의 통계분포를 반영한 임계값 추정이 필요하다. 본 연구에서는 고해상도 SAR 영상의 통계적 분포특성을 반영하여 임계값을 이용하는 변화탐지 알고리즘을 제안한다. 제안된 알고리즘의 성능을 시험하기 위해 SAR 영상 시뮬레이션을 수행하여 성능을 시험하고 검증하였다. 마지막으로 Cosmo-Skymed과 다목적실용위성-5 영상에 각각 적용하여 검증하고 비교한 결과를 제시한다.

• 재무관리연구
• /
• 제20권1호
• /
• pp.191-212
• /
• 2003

주가지수선물의 도입은 현물주식시장의 정보 비효율성을 완화시켜 현물주식시장에서 변동성의 비대칭성이 줄어든다는 주가지수선물의 도입 효과를 살펴보기 위하여 KOSPI 200 주가지수 선물 도입 전 후를 대비하여 현물주식시장의 변동성에 대한 비대칭성 정도를 비교분석 하였다. 변동성의 비대칭성을 반영하는 TGARCH 모형을 이용하여 비대칭 비율(asymmetry ratio)을 추정하고 모형의 적합성 검진(diagnostic test)을 통해 비대칭성을 반영하지 않는 GARCH 모형과 비교분석 하였다. 분석결과에 의하면 주가지수선물 도입 이후 현물주식시장의 변동성은 비대칭적 현상이 줄어들었고 그 결과 주가지수선물 도입 이후에는 비대칭성을 고려한 모형과 그렇지 않은 모형간에 적합성의 차이가 미미하게 나타났다. 그러나 현물주식시장의 비대칭적 변동성의 정도는 시장 상승국면에서 보다는 시장 하락국면에서 더 심하게 나타나는데 주가지수선물이 도입되어도 시장하락국면에서 비대칭성이 더 강하게 나타났다. 하만 도입 이전보다는 어느 정도 완화된 것으로 나타나 현물주식시장에서 주가지수선물 도입의 완화 효과를 부정할 수 없을 것으로 판단된다. 한편 동일한 분석기간 동안 주가지수선물시장에서도 변동성의 비대칭성이 발견되었다. 그러나 비대칭적 변동성의 정도가 현물주식시장에 비해서는 상대적으로 적게 나타나 현물주식시장보다는 정보가 가격에 신속하게 반영되고 현물주식시장 보다 공매가 용이하여 양방향의 정보에 모두 자본화할 수 있기 때문으로 사료된다.

• Journal of Preventive Medicine and Public Health
• /
• 제57권3호
• /
• pp.288-297
• /
• 2024

Objectives: This study explored the prevalence and predictors of alcohol and cannabis co-use among 9263 Filipino adolescents, using data from the 2019 Global School-based Student Health Survey (GSHS). Methods: We conducted a cross-sectional secondary analysis of the GSHS, targeting adolescents aged 13-17 years and excluding cases with incomplete data on alcohol and cannabis use. Our analysis employed the bivariate chi-square test of independence and multivariable logistic regression using Stata version 18 to identify significant predictors of co-use, with a p-value threshold set at 0.05. Results: The weighted prevalence of co-users was 4.2% (95% confidence interval [CI], 3.4 to 5.3). Significant predictors included male sex (adjusted odds ratio [aOR], 4.50; 95% CI, 3.31 to 6.10; p<0.001) and being in a lower academic year, specifically grade 7 (aOR, 4.08; 95% CI, 2.39 to 6.99; p<0.001) and grade 8 (aOR, 2.20; 95% CI, 1.30 to 3.72; p=0.003). Poor sleep quality was also a significant predictor (aOR, 1.77; 95% CI, 1.29 to 2.44; p<0.001), as was a history of attempted suicide (aOR, 5.31; 95% CI, 4.00 to 7.06; p<0.001). Physical inactivity was associated with lower odds of co-use (aOR, 0.45; 95% CI, 0.33 to 0.62; p<0.001). Additionally, non-attendance of physical education classes (aOR, 1.48; 95% CI, 1.06 to 2.05; p=0.021), infrequent unapproved parental checks (aOR, 1.37; 95% CI, 1.04 to 1.80; p=0.024), and lower parental awareness of free-time activities (aOR, 0.63; 95% CI, 0.45 to 0.87; p=0.005) were associated with higher odds of co-use. Factors not significantly linked to co-use included age group, being in grade 9, always feeling lonely, having no close friends, being bullied outside school, and whether a parent or guardian understood the adolescent's worries. Conclusions: The findings highlight the critical need for comprehensive interventions in the Philippines, addressing not only physical inactivity and parental monitoring but also focusing on sex, academic grade, participation in physical education classes, sleep quality, and suicide attempt history, to effectively reduce alcohol and cannabis co-use among adolescents.

• 임산에너지
• /
• 제19권2호
• /
• pp.93-101
• /
• 2000

아까시나무의 목질부와 현사시나무, 물푸레나무 및 느릅나무의 수피를 채취하여 아세톤-물 혼합용액(7:3, v/v) 으로 추출한 후 hexane, chloroform, ethylacetate 및 수용성으로 분획하고 동결건조하여 분말로 조제한 후 메탄올-물 등의 용리용매로 Sephadex LH-20 칼럼에서 크로마토그래피를 수행하였다. 물푸레나무에서는 aesculitin 및 그 파생물인 fraxetin 등 다량의 쿠마린 화합물과 에스테르화합물을 단리하였으며, 느릅나무로부터 C-7에 xylopyranose와 apiofuranose와 같은 5탄당이 결합된(+)-catechin 배당체 화합물과 procyanidn B-3를 단리하였다. 아까시나무에서는 leucorobinetinidin의 C-4에 ethoxyl 기가 결합된 flavan 유도체 화합물과 robinetin 등의 flavanonol 화합물을 단리하였다. 현사시나무에서는 taxifolin 등의 후라보노이드 화합물과 배당체인 sakuranetin-5-O-glucopyranoside를 단리하였으며 살리신 유도체인 salireposide 등을 단리하였다. 내후성 시험에서는 목재블록에 부후균을 접종하여 배양한 후 중량감소를 측정하는 방법과 목분-agar 배지에 부후균을 접종한 후 균사의 생장 직경을 측정하는 방법을 적용하였다. 아까시나무가 다른 시룓르보다 우수한 활성을 나타내었으며 특히 메탄올 추출머리를 하지 않은 시료가 처리한 시료보다 좋은 균사생장 저해효과를 나타냈다. 항산화 활성 시험에서는 물푸레나무의 에틸아세테이트 분획이 가장 높은 활성을 보였으며, 아까시나무의 에틸아세테이트 분획도 비교적 높은 효과를 나타내었고, 이 두 분획으로부터 단리된 주요 단리화합물에 대해서는 물푸레나무의 aesculetin이 가장 높았으며 아까시나무의 robinetinidin도 비교적 좋은 효과를 나타냈다.)나 틈새시장(niche market) 마케팅 등에 적용 가능하리라 여겨진다.된다.다.산물로 판단되었다.징하며 WLWQ에 적용되는 몇 가지 제약을 관찰하고 이를 일반적인 언어원리로 설명한다. 첫째, XP는 주어로만 해석되는데 그 이유는 XP가 목적어 혹은 부가어 등 다른 기능을 할 경우 생략 부위가 생략의 복원 가능선 원리 (the deletion-up-to recoverability principle)를 위배하기 때문이다. 둘째, WLWQ가 내용 의문문으로만 해석되는데 그 이유는 양의 공리(the maxim of quantity: Grice 1975) 때문이다. 평서문으로 해석될 경우 WP에 들어갈 부분이 XP의 자질의 부분집합에 불과하므로 명제가 아무런 정보제공을 하지 못한다. 반면 의문문 자체는 정보제공을 추구하지 않으므로 앞에서 언급한 양의 공리로부터 자유롭다. 셋째, WLWQ의 XP는 주제어 표지 ‘는/-은’을 취하나 주어표지 ‘가/-이’는 취하지 못한다(XP-는/-은 vs. XP-가/-이). 이는 IP내부 에 비공범주의 존재 여부에 따라 C의 음운형태(PF)가 시성이 정해진다는 가설로 설명하고자 했다. WLWQ에 대한 우리의 논의가 옳다면, 본 논문은 다음과 같은 이론적 함의를 기닌다. 첫째, WLWQ의 존재는 생략에 대한 두 이론 즉 LF 복사 이론과 PF 삭제 이론 중 전자의 입장을 지지한다. 둘째, WP를 XP로부터 복원할 때 부분 자질만 복사된다. 이는 어휘가 통사층위로 들어온 이후에도 어휘 자질들이 완전히 동결되는 것이 아니라 계속 지시될 수 있다는 가설을 지지한다.ance and stress, and high threshold voltage. Besides, sheet resistance and stress value, rms(root mean square) by AFM were observed. On the electrical

• Tuberculosis and Respiratory Diseases
• /
• 제50권4호
• /
• pp.415-425
• /
• 2001

배 경 : 폐기종의 중증도 판정에 있어서 병리학적 기준은 기강(air space)의 확장 정도에 있으며, 이는 고해상도 전산화 촬영 (high resolution computed tomography, HRCT)에 의해 결정되는 폐기종 점수(emphysema scoring)와 좋은 상관성을 보인다는 것은 주지의 사실이다. 한편 폐기종의 주증상은 운동성 호흡곤란이므로 폐기종에 대한 임상적 평가는 운동능력의 감소를 측정하는 것이 타당하다고 알려져 있다. 그러나 대개의 경우 폐기종의 중증도 판정은 안정시 폐기능 검사에 의존하는 경우가 흔하며, 병리학적 중증도 판정과 상관성이 높다고 알려져 있는 고해상도 전산화 촬영에 의한 폐기종 점수와 운동부하 폐기능검사 지표들과의 상관성 여부에 대한 연구는 드문 실정이다. 이에 본 연구에서는 폐기종의 중증도 판정에 있어서 HRCT와 안정시 폐기능 검사 및 운동부하 폐기능 검사간에 상호 관련성을 확인하여 보았다. 방 법 : 평균 연령 $60.6{\pm}10.3$세인 14명의 폐기종 환자들을 대상으로 HRCT, 안정시 폐기능 검사(forced expiratory flow volume curve, lung volumes by He dilution method, DLco, ABGA), 그리고 점진적운동부하폐 기능검사(incremental cycle ergometer)를 시행하였으며 HRCT는 GE highlight를 이용하여 조영증강 없이 최대흡기시에 1.5mm collimation, 10mm 간격으로 폐전체를 스캔하였고, 환자마다 모든 스캔에서 density mask를 이용하여 -400 HU를 기준으로 한 총폐면적과 -900 HU를 기준으로 한 폐기종 면적을 각각 구하여 백분율로 환산하여 폐기종 점수를 구하였다. 결 과 : 평균 폐기종 점수는 $37.4{\pm}14.9%$ 이었다. 폐기종 점수와 안정시 폐기능 검사의 DLco(r=-0.75)와 $PaO_2$(r=-0.66) 사이에서만 유의한(p<0.05) 상관성이 관찰되었다. 반면 폐기종 점수와 운동부하폐기능 지표들간의 상관성은 최대 산소섭취량(r=-0.68), 혐기성 역치(V-slope method, r=-0.690), 최대운동부하(r=-0.74), 최대운동시 $O_2$ pulse(r=-0.73), 최대운동시의 생리적 사강비율 (r=0.80) 등과 높은 유의성 (p<0.01)을 나타내었다. 그러나 호흡예비율과 심박수 예비율간에서는 유의한 상관성이 없었고, pulse oxymeter로 측정한 산소포화도와의 상관성도 유의하지 않았다. 결 론 : 이상의 결과에서 폐기종의 병리학적 중증도를 잘반영한다고 알려진 HRCT 폐기종 접수는 폐기종에 의한 생리학적 장애를 잘 반영하는 운동부하 폐기능 검사의 주요 지표들과 유의한 상관성이 있음을 확인할 수 있었다.

• Tuberculosis and Respiratory Diseases
• /
• 제47권1호
• /
• pp.26-34
• /
• 1999

연구배경: 최대 산소 섭취량 ($VO_2$ max) 은 답차 운동시 자전거시 보다 높게 측정이 되는데, Hassen과 Wasserman 등에 의하면 답차 시 약 1.11배 정도 높게 측정된다고 하였다. $VO_2$ max는 나이, 성별, 키, 체중 등 뿐만 아니라 인종, 사회문화적 배경 및 운동 습관에 따라서도 영향을 받을 수 있음이 알려져 있다. 본 연구에서는 한국 대학생 연령의 성인을 대상으로 답차와 자전거 운동시 $VO_2$ max와 무산소 역치에서의 산소 섭취량 (AT)을 측정, 비교하였다. 방법: 1998 년 6월부터 9월까지 연세대학교 의과대학에 재학중인 남학생 44명을 대상 으로 하였다. 이들을 무작위로 2군으로 나누어 24명은 답차를 우선 시행 후 1주일 후 자전거로 운동을 시행하였고 20명은 자전거를 우선 시행 후 답차를 시행하였다. 증상 제한적 최대 운동 시행토록 하였으며, 최소한 호흡 교환비(RER) 가 1.1을 초과한 경우, 최대 산소 섭취량이 30초 이상 평점을 이룬 경우, 최대 운동시 심박 예비율이 15% 미만이거나 또는 호흡 예비율이 30% 미만일 경우를 최대 운동으로 정의하였고 이들 중 한가지라도 충족시키지 못한 경우에는 최대운동을 하지 않은 것으로 (submaximal exercise) 간주하여 연구에서 제외하였다. AT는 V-slope method로 구하였다. 결과: 답차 운동시의 $VO_2$ max와 AT 의 값은 각각 $45.1{\pm}6.66 m\ell$/kg/min, $26.0{\pm}6.78 m\ell$/kg/min 이었으며, 자전거 운동시에는 각각 $34.9{\pm}5.89 m\ell$/kg/min, $19.5{\pm}4.77 m\ell$/kg/min 이었다. 측정-$VO_2$ max/예측 $VO_2$ max 의 값은 답차 운동시 $98.8{\pm}13.24 %$ 이었으며, 자전거 운동시 $84.4{\pm}13.42 %$ 이었다. 자전거의 결과로 답차 운동시 $VO_2$ max 의 예측치를 구할 때 쓰이는 Hassen등의 공식을 이용하여 이를 실제 답차 운동시 얻어진 $VO_2$ max값과 비교해 보았을 때 두 값 사이의 차이는 통계적으로 유의하였다 (p<0.01). 최대 운동시 심박 예비율, 산소/맥, 호흡 예비율, $V_E$/MVV, $V_E/VCO_2$는 (답차 운동과 자전거 운동사이에 차이가 있었다 ). 그러나 $V_E/VO_2$, Vd/Vt, Ti/Ttot는 차이가 없었다. AT에서는 산소/맥, 호흡 예비율, $V_E$/MVV, Ti/Ttot값은 차이가 있었으나 나머지 값들은 그렇지 못하였다. 결론: 본 연구에서 보았듯이 답차와 자전거 사이의 차이가 크므로 결과의 해석에 이용시 유의해야 할 것이며, 향후 한국인에서 적용할 수 있는 참고치를 구하려는 노력이 필요할 것으로 여겨진다.

• Journal of Radiation Protection and Research
• /
• 제21권4호
• /
• pp.273-284
• /
• 1996

착상전기(着床前期}의 태아(胎兒)는 방사선(放射線)을 비롯한 많은 환경요인(環境要因)에 대하여 감수성(感受性)이 높은 개체(個體)임에도 불구하고 특히 이 시기는 임신부(姙娠婦)가 자각(自覺)적으로 임신을 감지할 수 없는 시기이기에 이러한 여러 환경유해요인으로부터 의도적으로 피할 수가 없다. 그러므로 착상전기의 영향을 충분히 검토한 후에 의료행위를 취할 것이며 이에 대한 방어(防禦)대책도 검토할 필요가 있다. 종래 까지 방사선에 대한 태아영향에 관한 많은 연구결과에 의하면 방사선 및 그 외의 유해요인에 대한 착상전기의 영향은 배사망(胚死亡)(유산(流産))만이 일어나며 기형(奇形)은 유발(誘發)하지 않는다고 하여 발생학(發生學)등 여러 교과서에서 기형은 기관형성기(器官形戚期)만이 국한(局限)해서 일어나는 영향이라고 단정되어 왔었다. 그러나 이 연구결과 착상전기에 있어서도 기형이 유발하여 오히려 기관형성기((器官形成期)보다도 감수성이 높다는 것이다. 또한 착상전기에서도 기형유발의 시기특이성을 가지며 여러 종류의 기형이 발생한다는 것이 본 연구로부터 밝혀졌다. 실험동물은 ICR Mouse를 사용했다. ICR Mouse는 일반적으로 태아사망 및 기형실험에 널리 사용되는 것이다. 사육조건은 Conventional 한 조건하에서 사육했으며 Mating 방법(方法)은 Female 마우스의 발정기(Sexual Excitement period)에 있는 mouse 질(膣)을 육안 적으로 관찰하여 $AM 6:00{\sim}AM 9:00$시까지 3시간만 mate시켰다. AM9:00시에 Vaginal Plug를 관찰하여 임신을 확인했다. Plug가 확인 된 마우스는 AM8:00시에 수정(Conception)된 것으로 가정하고 이 시점을 임신 0일 0시로 수정 난의 태아연령을 산정했다. 방사선조사는 $^{135}Cs\;{\gamma}-$선을 사용하였으며 임신 마우스의 전신조사를 실시하고 조사한 시기는 각 2, 48, 72, 96hpc이며 조사한 방사선 선량 군은 $0.1{\sim}2.5Gy$이다. 태아영향 관찰지표는 태아 연령은 mate일 오전 8:00시를 임신 0일 0시로 환산하여 태아연령 18일에 임신마우스를 Cervical vertebral dislocation에 의해 도살했다. 도살 후 해부하여 각 임신 마우스별로 관찰했다. 착상 율을 관찰하기 위하여 황체수를 세었고, 태아사망과 생존태아를 구별했다. 자궁 내 사망의 분류는 태아사망을 1) preimplantation death 2) Embryonic death 3) Fetal death로 분류했다. 착상전사망은 수정후 $0{\sim}4.5$일(1세포기${\sim}$배반포후기 부화까지)까지의 사망으로써 난소의 황체수(배란 수)와 착상태아(생존태아, 착상흔, 태반유잔, 흡수태아, 침연태아의 합계)로부터 구할 수 있다. Embonic death는 수정 후 $4.5{\sim}13$일까지의 사망으로써 Implantation sites, Placental remnants, Resorption of fetus로 관찰된 것이다. Fetal death는 수정후 $14{\sim}18$일까지의 사망으로써 Maceration of fetus로 관찰되는 것이다. 통계학적 분석은 각 Group의 착상 을과 자궁 내 사망 율을 산출할 때에는 각 임신마우스에 따라 발생빈도가 크게 다르기 때문에 통계처리에는 Non parametric 검정인 Kluskal Wallis 검정을 사용하여 분석하였다. 또한 개체 Level 영향인 착상을, 태아사망, 기형의 threshold dose의 산정에 대해서는 SAS-Logistic 검정에 따라 통계 분석을 하여 $5%(Ld_5,\;ED_5)$ 및 $10%{\times}2/3$점을 threshold dose로 판단했다. 태아체 중에 대해서는 parametric검정인 t-test검정에 의하여 분석했다. 그 결과 착상전기에서도 기형이 유발하며 특히 시기에 따라 일어나는 때와 일어나지 않는 때가 있음을 본 연구로부터 밝혀졌다. 또한 착상전기의 영향으로써 유발되는 기형은 여러 종류의 기형이 발생함이 밝혀졌다. 특히 이시기는 착상전 사망 및 배(胚)사망은 방사선 선량에 따라 크게 일어나나 태아사망(Fetal death) 및 태아체중은 유의차(有意差)가 없었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.