• KDI Journal of Economic Policy
• /
• 제26권1호
• /
• pp.105-140
• /
• 2004

Korea is entering the class of aging population nations. This paper investigates the extent demographic factors and the aging population affect the saving rate, using an extended life-cycle/permanent-income hypothesis on saving. The results of the tests with Korean household survey data from 1977 to 2002 reveal that real saving rates increase when the duration of lifetime and per household real disposable income rise, and decrease when the growth rate of income and net worth-to-GDP ratio rises. The growth rate of per household real disposable income has negative effects, suggesting that households calculate their life cycle income in a forward looking manner. The elasticities with respect to a change in the lifetime horizon and the growth rate of per household income are 0.58 and -0.03, respectively. A one percent rise in the net worth to GDP ratio reduces the saving rate by 0.3 percent. A one percent rise in per household income increases it by 0.33 percent. The younger-age and the elder-age dependency ratios have insignificant effects on the household saving rate behavior. When Korean life expectancy rises, the private saving rate declines modestly and the government saving rate declines substantially. The economy's real net saving rate declines from 33 percent in 2002 to 30 percent by the year 2030.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.155-160
• /
• 2002

Metal matrix composites had generated a lot of interest in recent times because of significant in specific properties. It was also highlighted as the materials of frontier industry because strength, heat-resistant, corrosion-resistant, wear-resistant were superiored. In this study the strength properties of $Al_{18}B_4O_{33}/AC4CH$ were represented mixing the binder of $Al_2O_3$ and $TiO_2$. It was also fabricated by squeeze casting. $Al_{18}B_4O_{33}/AC4CH$ was fabricated at the melt temperature of $760^{\circ}C$ the perform temperature of $700^{\circ}C$ and mold temperature of $200^{\circ}C$ under the pressure of 83.4MPa and observed SEM. Fatigue crack growth rate tests on compact tension specimen(half-size) of thickness 12.5mm were conducted by using sinusoidal waveform. Compact tension specimens(half-size) were used and fatigue crack growth rate da/dN and stress intensity factor range ${\Delta}K$ were analyzed concerning to the R value of 0.1 and 0.05. In order to find out the value of ${\Delta}K$, load amplitude constant method was applied by the standard fatigue testing method describes in ASTM E647-95a. As the results of this study, Fatigue crack growth rate increased with in creasing the load ratio, Consequently, At equivalent stress intensity factors, the fatigue crack growth rates in MMC were faster than those of AC4CH alloy. then the fatigue life and the fatigue crack growth rate was investigated using scanning election microscopy(SEM)

• 생물환경조절학회지
• /
• 제18권2호
• /
• pp.137-141
• /
• 2009

분주 크기와 배지 종류가 고추냉이 생존율과 생육에 미치는 영향을 알아보고자 환경이 조절된 생장상에서 60일간 재배하였다. 수태로 감싼 근경 크기(직경) 5mm 이상 분주 묘의 생존율은 100%였으며, 생육(초장 12cm 내외, 엽수 $3{\sim}4$장)은 양호하였다. 생육 60일의 분주 묘는 초장 20cm 이상, 엽수가 $1{\sim}2$장 증가하였다. 루톤 분의제 처리는 생존율과 생육에 효과가 없었다. 배지 종류(마사, 난석)에 따른 직경 $5{\sim}10$mm 크기의 분주 묘를 담액 수경으로 재배하였을 때 83% 이상의 생존율을 보였으며 배지 종류에 따른 생육 차이는 없었다. 따라서 근경 크기 5mm 이상의 고추냉이 분주를 환경이 조절된 생장상에서 30일간 수경재배 방식으로 순화하여 고추냉이 건전 묘를 생산할 수 있다.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.168-177
• /
• 1999

Fatigue damage is the phenomena which is accumulated gradually with loading cycle in material. It is represented by fatigue crack growth rate da/dN and fatigue life ratio $N/N_{f}$. Fracture mechanical parameters estimating large crack growth behavior can calculate quantitative amount of fatigue crack growth resistance in engineering material. But fatigue damage has influence on various load, material and environment. Therefore, In this study, we propose that artificial intelligent fatigue damage model can predicts fatigue crack growth rate da/dN and fatigue life ratio $N/N_{f}$ simultaneously using fracture mechanical and nondestructive parameters.

• 산업기술연구
• /
• 제13권
• /
• pp.49-57
• /
• 1993

Bending fatigue tests were carried out on the specimenes with two different strength levels in order to investigate small crack growth rate. The main results obtained are as follows : (1) Small crack growth law, $da/dn=C{\sigma}_a{^n}a$ is useful several materials, but is not the rule applicable to all cases generally. (2) When da/dn in several specimens are equal, COD near the crack tip are also nearly equal. (3) Crack tip opening displacement(CTOD) is the main factor to control the small crack growth rate, and da/dn ${\propto}$ CTOD comes into being between the two. Accordingly, $da/dn=C({\sigma}_a{^2}/{\sigma}_s){^n}a^n$ shows the small crack growth rate being reflected crack closure phenomenon.

• Journal of Microbiology and Biotechnology
• /
• 제15권2호
• /
• pp.368-375
• /
• 2005

Batch cultures were carried out to optimize the exo-polysaccharide production by liquid cultures of Pleurotus ferulae. Among the various carbon sources, when $5\%$ of glucose was used, the maximum mycelial growth and exo-polysaccharide concentration reached were 8.78 g/l and 3.59 g/l, respectively. Yeast extract and polypeptone were identified as the most suitable nitrogen sources. In particular, when a mixture of $1\%$ of polypeptone and $0.8\%$ of yeast extract was used, 9.52 g/l of mycelial growth and 4.09 g/l of exo-polysaccharide were obtained. In the case of mineral sources, K$_2$HPO$_4$ and MgSO$_4$$\codt$7H$_2$0 were found to be the best mineral sources for mycelial growth and exo-polysaccharide production. Under the optimized culture conditions, the agitation speed and aeration were investigated for mycelial growth and exo­polysaccharide production in a jar fermentor. The maximum mycelial growth and exo-polysaccharide concentration at 1.5 vvm and 200 rpm obtained were 13.2 g/l and 4.95 g/l, respectively, after 10 days of culture, which were $76\%$ and $79\%$ higher than those of the basal medium. The specific growth rate was decreased with the increase of mycelial growth. However, the specific production rate of the exo-polysaccharide was proportionally increased with the specific growth rate. The proposed model profiles showed good agreement with the experimental results for the mycelial growth and exo-polysaccharide production. The specific production rate using the optimized medium was higher than that of basal medium.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.317-326
• /
• 2003

The influence of cyclic bending moment on the delamination and the fatigue crack propagation behavior in Al/GFRP laminate such as the wing section was investigated. The main objective of this study was to evaluate the relationship between crack profile and delamination behavior. And a propose parameter on the delamination growth rate(d $A_{D}$/da) of Al/GFRP laminates with a saw-cut using relationship between delamination area( $A_{D}$) and cycles(N), crack length(a), stress intensity factor range($\Delta$K). Also, the fiber bridging effect factor( $F_{BE}$ ) was propose that the fiber bridging modification factor($\beta$$_{fb}$ ) to evaluate using the delamination growth rate(d $A_{D}$/da). The shape and size of the delamination zone formed along the fatigue crack between aluminum alloy sheet. Class fiber-adhesive layer were measured by an ultrasonic C-scan image. The shape of delamination zone turns out to be semi-elliptic with the contour decreased non-linearly toward the crack tip. It represents that relationship between crack length and delamination growth rate(d $A_{D}$/da) were interdependent by reciprocal action, therefore it's applicable present a model for the delamination growth rate(dA/sib D//da) in Al/GFRP laminates.minates.s.

• Journal of Ecology and Environment
• /
• 제30권2호
• /
• pp.109-119
• /
• 2007

The effect of water flow on the growth of Gafrarium tumidum was studied in the field using open cages constructed with stainless steel net and perspex in which holes were drilled. Cages with different flows (25, 50 and 75% of the control) were made by varying the area of perspex being drilled. Reduction in flow rate was directly proportional to the undrilled area, and the mean flow rate of the different treatment groups varied from 3.12 cm/s for the 25% exposure to 12.48 cm/s for the control cages. At the end of the 3-month experiment, no significant differences in sediment characteristics were found among the treatments. Growth in shell length, shell weight and tissue dry weight was, however, positively correlated with flow rate. Percentage increases ranged from $3.0{\sim}8.3%$ for shell length, $9.9{\sim}23.1%$ for shell weight and $17.2{\sim}53.3%$ for tissue dry weight. Condition index of the clam was not significantly different among the treatments. Seston depletion effect could reduce growth in G. tumidum only when water flow was reduced to 25% of the control. G. tumidum also exhibited different responses in shell and tissue growth at low flow rates, in which shell growth continued to decrease as flow rate decreased whereas tissue growth was relatively independent of low flows at 25 and 50% of the control. It was suggested that when seston flux was reduced at slow flows, it would be a better strategy for G. tumidum to channel energy for gonad development instead of shell growth during the reproductive stage.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.113-113
• /
• 2011

Cobalt oxide 박막은 gas sensor, electro-chromic 소자 그리고 energy storage 소자등 광범위한 분야에서 연구되고 있으며 sputtering, CVD 그리고 electrochemical deposition 를 포함한 다양한 방법으로 증착할 수 있다. 최근에는 원자층 증착 방법을 이용한 cobalt oxide박막 증착이 연구되었는데, cyclopentadienyl계열의 전구체와 ${\beta}$-diketonate계열의 전구체를 이용하였다. 하지만 전구체의 낮은 증기압으로 인해 낮은 growth rate (약 0.02~0.05 nm/cycle)을 보였다. 본 연구에서는 증기압이 높은 전구체인 CCTBA (dicobalt hexacarbonyl tert-butylacetylene) 를 선정하여 원자층 증착 공정의 growth rate를 향상시키고자 하였다. 반응기체로는 O3을 사용하여 cobalt oxide 박막을 증착하였다. 반응기체의 주입시간 및 공정온도를 달리하여 시편을 증착한 결과 $80^{\circ}C$에서 0.1 nm/cycle로 기존의 보고된 growth rate보다 높은 수치를 얻을 수 있었다. 또한 증착된 cobalt oxide 박막내 조성분석과 I-V 측정 등을 이용하여 물리적, 전기적 특성을 규명하였다

• 한국재료학회지
• /
• 제9권3호
• /
• pp.257-262
• /
• 1999

MOCVD를 이용하여 $SiO_2$로 패턴된 GaN/sapphire 기판상에서 $NH_3$유량과 성장온도가 GaN 성장의 선택성과 성장 특성에 미치는 영향을 조사하였다. $NH_3$유량을 500~1300sccm, 성장온도를 $950~1060^{\circ}C$로 변화시켜 성장변수에 따른 영향을 주사전자현미경으로 관찰하였다.$NH_3$유량이 증가할수록 성장선택성이 향상되었으나 기판윈도우에서 성장되는 GaN 형상변화에는 큰 영향을 미치지 못하였다. 성장온도가 높을수록 GaN의 성장선택성이 향상됨이 관찰되었다. 패턴 모양을 원형, 선형, 방사선모양(선형 패턴을 30, $45^{\circ}$로 회전)으로 제작하여 GaN 성장을 수행한 후 관찰한 결과 {1101}으로 이루어진 Hexagonal 피라밋 형상과 마스크층 위로의 측면성장을 얻을 수 있었으며, 성장조건에 따른 <1100>와 <1210>의 방향으로의 측면성장속도의 차이를 관찰할 수 있었다.