• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1144-1158
• /
• 2016

In this paper, delay-constrained data transmission is considered over error-prone networks. Network coding is deployed for efficient information exchange, and an approximate decoding approach is deployed to overcome potential all-or-nothing problems. Our focus is on determining the cluster size and its impact on approximate decoding performance. Decoding performance is quantified, and we show that performance is determined only by the number of packets. Moreover, the fundamental tradeoff between approximate decoding performance and data transfer rate improvement is analyzed; as the cluster size increases, the data transfer rate improves and decoding performance is degraded. This tradeoff can lead to an optimal cluster size of network coding-based networks that achieves the target decoding performance of applications. A set of experiment results confirms the analysis.

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.581-588
• /
• 2000

Phase transition of the Lennard-Jonesian binary system with a free surface was studied by employing molecular dynamics simulation. The main focus of this study was to investigate the effect of size misfit and solute concentration on phase transition during heating and quenching. For a binary system with a free surface, the melting point and the critical quenching rate decrease as size misfit and solute concentration increase.

• Journal of Korean Society of Water and Wastewater
• /
• v.17 no.4
• /
• pp.528-533
• /
• 2003

Bubble size is one of the most important parameters affecting DAF (Dissolved-Air-Flotation) process. It is generally known that small bubbles are preferred. However, the fact seems to be based on the particle removal efficiency at contact zone only, without considering separation zone. Besides, the effect of bubble size on the overall DAF process has not been fully investigated yet. Therefore, the effect of bubble size on collision efficiency, collision chances, and surface loading rate is calculated using theoretical models, and the results are discussed in this paper.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.34-38
• /
• 2003

The large eddy simulation based Fire Dynamics Simulator was utilized to investigate the effects of the size of an opening on smoke removal performance for the three smoke control systems-ventilation purge, and extraction. Three different opening sizes, $r_A$=1, 2, and 3 were investigated while the flow rate remained 0.75 $m^3/s$ at the inlet or outlet depending on the systems. Increase of the opening size did not give a significant difference in the smoke removal rate for the three smoke control systems, though the increasing opening size slightly improved smoke removal. The extraction system was shown the best smoke control system, and the purge system yielded low performance compared to the other two systems for all the different opening sizes.

• Computers and Concrete
• /
• v.9 no.3
• /
• pp.179-193
• /
• 2012

The hydration of cement contributes to the performance characteristics of concrete, such as strength and durability. In order to improve the utilization efficiency of cement and its early properties, the particle size distribution (PSD) of cement varies considerably, and the effects of the particle size distribution of cement on the hydration process should be considered. In order to evaluate effects of PSD separately, experiments testing the isothermal heat generated during the hydration of cements with different particle size distributions but the same chemical composition have been carried out. The measurable hydration depth for cement hydration was proposed and deduced based on the experimental results, and a PSD hydration model was developed in this paper for simulating the effects of particle size distribution on the hydration process of cement. First, a reference hydration rate was derived from the isothermal heat generated by the hydration of ordinary Portland cement. Then, the model was extended to take into account the effect of water-to-cement ratio, hereinafter which was referred to as PSD hydration model. Finally, the PSD hydration model was applied to simulate experiments measuring the isothermal heat generated by the hydration of cement with different particle size distributions at different water-to-cement ratios. This showed that the PSD hydration model had simulated the effects of particle size distribution and water-to-cement ratio on the hydration process of cement with satisfactory accuracy.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.9_10 s.157
• /
• pp.1378-1388
• /
• 2006

We conducted a questionnaire survey of 481 Korean female college students and measured anthropometrically 2 girth of their bodies(bust, under bust girth) in order to understand the psychological needs about brassiere and the physical characteristics of consumers aged between 19 and 25(the 1924 generation). There were two major problems to be solved to improve the fit of brassiere in aspect of size. First, most brands for this age group aimed at product differentiation mainly on visual design not on brassiere size. According to the body measurements, the distribution of brassiere size had 6 sections '70AA, 70A, 70B, 75AA, 75A and 75B cups' showing a rate of 63.8% but most brands for this age group were producing '75A, 80A, 85A, 75B, 80B and 85B cups' showing a rate of 24.7%. Second, most subjects of this survey didn't know their own breast size and the sizing system of brassiere which are necessary in order to select the proper brassiere size. And most subjects were wearing a bigger size brassiere than their own body size even though one was in the range of '75A, 80A, 85A, 75B, 80B and 85B'. It might be possible that the dimensions of brassiere products in the market and the sizes indicated on the labels do not correspond. For increasing the consumer satisfaction it is necessary to adjust the production rate of brassiere sizes and to develop ergonomic brassiere products with proper dimensions and shapes for each brassiere size.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.440-444
• /
• 2015

Effects of operating variables on the solid circulation rate were investigated in a three-phase circulating fluidized bed, of which inside diameter was 0.102m and height was 3.5m, respectively. Gas velocity, primary and secondary liquid velocities, particle size and height of solid particles piled up in the solid recycle device were chosen as operating variables. The solid circulation rate increased with increasing primary and secondary liquid velocities and height of solid particles piled up in the solid recycle device, but decreased with increasing particle size. The value of solid circulation rate decreased only slightly with increasing gas velocity in the riser. The values of solid circulation rate were well correlated in terms of dimensionless groups within the experimental conditions.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.1
• /
• pp.39-53
• /
• 1998

The extraction rate of ginger from Korean-grown ginger root with supercritical carbon dioxide was measured as a function of flow rate of supercritical carbon dioxide, particle size, temperature and pressure. the extraction rate increased as the particle size decreased due to a decrease in the diffusion path. The extraction rate were independent of flow rate of supercritical carbon dioxide in a plot of ginger oil yield versus extraction time. This indicated that the extraction process is controlled by intraparticle diffusion within a particle of ginger root. In the case of temperature and pressure effect, the experimental results showed that the extraction rate decreased with an increase in temperature and increased with an increase in pressure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.99-106
• /
• 2010

A piezo-driven injector was applied with a purpose to evaluate the effect of induced voltage on spray characteristics. For this, injection rate, macroscopic imaging, ambient gas entrainment and particle sizing were carried out. It was shown that initial slope of injection rate was steeper as induced voltage increased, while slope of injection rate became mostly constant with fully opened needle. From macroscopoic imaging, longer spray tip penetration was produced with higher induced voltage. Moreover, wider spray angle was detected in the early stage of spray development, when higher induced voltage was applied. Ambient air entrainment rate was increased and particle size was reduced with higher induced voltage.

• The Journal of Fisheries Business Administration
• /
• v.45 no.1
• /
• pp.95-107
• /
• 2014

This study is aimed to analyze the economic performance of black rockfish aquaculture by standardizing cost structures by region and farming size. The result of survey on farming and sale condition in each region, stocking density, survival rate, juvenile price, and unit production was the highest at Yeosu and Tongyeong, Heuksando showed the lowest. While rearing period was the longest at Tongyeong, the shortest region was Yeosu and Wando. In farming cost structure by region, amount of feeing was the highest at Tongyeong and Yeosu, and the lowest was Heuksando. Cost of medicine was high in Wando and Taean region, Yeosu and Hecksando was low. In case of farm size, feed cost ratio was high in the order of medium(0.75ha), small(0.25ha) and large(1.25ha) size. Standard production cost at every farm size of Heuksando showed the lowest among these regions. Taean and Yeosu was middle, and Tongyeong and Wando was the highest. According to the income, profit rate and investment return of farm size in all regions, as the bigger farm size, the higher income and profit rate was revealed. However, in case of Wando, Taean, and Heuksando which regions has high investment return, medium farm size was higher than large size. The result of economic analysis according to various factors, economic feasibility of black rockfish aquaculture in marine floating cage was showed significant changes by rearing and market condition.