• Journal of fish pathology
• /
• v.15 no.1
• /
• pp.37-42
• /
• 2002

Effect of mercury (Hg) toxicity on survival, growth, feed efficiency and oxygen consumption were examined in the juvenile olive flounder. Paralichthys olivaceus. Fishes were exposed to sublethal concentrations of Hg ranging from 0 to 0.13mg/L for 6 weeks. Hg reduced survival rate in a concentration and exposure period-dependent way and suddenly reduction occurred at Hg concentrations greater than 0.05mg/L after 6 weeks. Growth rate and feed efficiency also significantly decreased at greater than 0.028 and 0.05 mg/L respectively. Oxygen consumption rate was significantly decreased to 25 and 32% than that of the control at the Hg concentration of 0.05 and 0.13 mg/L respectively. These results suggest that Hg toxicity inhibit physiological function including growth, feed efficiency and oxygen consumption in the juvenile olive flounder, resulting in survival failure at high concentration.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.487-508
• /
• 2016

Purpose: Current testing method for drying rate used in military textiles has different results according to the public testing institute. So the purpose of this study was to suggest the alternative method which secure the reliability of the drying rate test. Methods: We measured the drying rate by various test methods for military clothes 14 species including quick drying function and compared the test results. Also, the collected data through the test was analyzed using one-way ANOVA. The p-value of results was compared by various testing institutions. Results: The results of this study are as follow; A deviation occurred among the testing institutions in original test method(KS K 0815). Whereas it is verified that there is no deviation among the institutions in 5% significance level by another test method(ISO 17617). Also it would increase work efficiency by reducing the testing time required to test by using ISO 17617. Conclusion: Based on the results, we can suggest the reliable test method of the drying rate.

• Journal of ILASS-Korea
• /
• v.8 no.4
• /
• pp.9-16
• /
• 2003

The Purpose of this study is to investigate the relationships between the local heat release rate and CH concentration have been investigated by numerical simulations of methane-air premixed flames. And simultaneous CH and OH PLIF(Planar Laser Induced Fluorescence) measurement has been also conducted for lean premixed flame as well as for laminar flames. Numerical simulations are conducted for laminar premixed flames and turbulent ones by using PREMIX in CHEMKIN and two dimensional DNS code with GRI mechanism version 2.11, respectively. In the case of laminar premixed flame, the distance between the peak of heat release rate and that of CH concentration is under $91{\mu}m$ for all equivalence ratio calculated in present work. Even for the premixed flame in high intensity turbulence, the distribution of the heat release rate coincides with that of CH mole fraction. For CH PLIF measurements in the laminar premixed flame burner, CH fluorescence intensity as a function of equivalence ratio shows a similar trend with CH mole fraction computed by GRI mechanism. Simultaneous CH and OH PLIF measurement gave us useful information of instantaneous reaction zone. In addition, CH fluorescence can be measured even for lean conditions where CH mole fraction significantly decreases compared with that of stoichiometric condition. It was found that CH PLIF measurements can be applicable to the estimation of the spatial fluctuations of heat release rate in the engine combustion.

• The Journal of the Korean dental association
• /
• v.58 no.1
• /
• pp.45-49
• /
• 2019

Korean society is experiencing a very rapid change in population aging. Oral diseases, including dental caries and periodontal disease, are usually cumulative and make oral health worse with age. Preventing tooth loss through the prevention and treatment of caries and periodontal diseases are essential for retaining oral function later in life. This study aimed to identify the trend in oral health status among elderlies over 65 years old, using major oral health indicators of Health Plan 2020. The fifth, sixth, and seventh Korea National Health and Nutrition Examination Survey (KNHANES V, VI, VII) were used in the present study to estimate the number of remaining natural teeth, the rate of 20 or more natural teeth, the rate of chewing difficulty, and the rate of oral health check-up of elderly. The number of remaining natural teeth increased from 15.6 in 2010 to 17.1 in 2015, and the rate of 20 or more natural teeth also increased from 45.8% in 2010 to 53.7% in 2015. The rate of chewing difficulty was similar but declined a little from 44.3% in 2010 to 42.9% in 2017. Finally, the rate of oral health check-ups of the elderly increased significantly from 12.2% in 2010 to 21.1% in 2017.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.275-278
• /
• 2005

INCONEL 718, nickel based superalloy, has good formability, high strength, excellent corrosion resistance and mechanical properties at high temperature. Owing to theses attractive properties, it finds use in applications such as combustion system, turbine engines and nuclear reactors. In such applications, components are typically required to be tolerant of high stress impact loading. This may cause material degradation and lead to catastrophic failure during service operation. In order to design optimal structural parts made of INCONEL 718, accurate understanding of material's mechanical properties, dynamic behavior and fracture characteristic as a function of strain rates are required. This paper concerned with the dynamic material properties of the INCONEL 718 for the various strain rates. The dynamic response of the INCONEL 718 at intermediate strain rate is obtained from the high speed tensile test machine test and at the high strain rate is from the split Hopkinson pressure bar test. Based on the experimental results, the effects of strain rate on dynamic flow stress, work hardening characteristics, strain rate sensitivity and elongation to the failure are evaluated. Experimental results from both quasi-static and high strain rate up to the 5000/sec are interpolated in order to construct the Johnson-Cook model as the constitutive relation that should be applied to simulate and design the structural parts made of INCONEL 718.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.109-115
• /
• 2019

The purpose of this study was to analyze and test the flow rate of a 1-inch ball valve used in a thermal power plant. To identify the flow-rate characteristics, numerical analysis was conducted and an experimental apparatus of the valve flow rate coefficient was used to compare the flow coefficient Cv values. To determine the internal pressure distribution, the sites of opening ball valves and flow fields were investigated. In particular, a smaller the valve opening resulted in a more complicated the flow field of the ball. The valve flow characteristic test showed that the Cv value and flow rate increased with increasing valve-opening rate and the secondary function was performed. The pressure drop increased as the valve opening rate decreased. In addition, the experimental results for the flow analysis are similar to the numerical analysis results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.2115-2130
• /
• 2022

With the development of over-the-top (OTT) services, the demand for content is increasing, and you can easily and conveniently acquire various content in the online environment. As a result, copyrighted content can be easily copied and distributed, resulting in serious copyright infringement. Some special forms of online service providers (OSP) use filtering-based technologies to protect copyrights, but illegal uploaders use methods that bypass traditional filters. Uploading with a title that bypasses the filter cannot use a similar search method to detect illegal content. In this paper, we propose a technique for profiling the Heavy Uploader by normalizing the bypassed content title and efficiently detecting illegal content. First, the word is extracted from the normalized title and converted into a bit-array to detect illegal works. This Bloom Filter method has a characteristic that there are false positives but no false negatives. The false positive rate has a trade-off relationship with processing performance. As the false positive rate increases, the processing performance increases, and when the false positive rate decreases, the processing performance increases. We increased the detection rate by directly comparing the word to the result of increasing the false positive rate of the Bloom Filter. The processing time was also as fast as when the false positive rate was increased. Afterwards, we create a function that includes information about overall piracy and identify clustering-based heavy uploaders. Analyze the behavior of heavy uploaders to find the first uploader and detect the source site.

• Journal of Animal Science and Technology
• /
• v.65 no.1
• /
• pp.32-56
• /
• 2023

This review explores the factors that improve meat protein digestibility and applies the findings to the development of home meal replacements with improved protein digestion rates in older adults. Various methods improve the digestion rate of proteins, such as heat, ultrasound, high pressure, or pulse electric field. In addition, probiotics aid in protein digestion by improving the function of digestive organs and secreting enzymes. Plant-derived proteases, such as papain, bromelain, ficin, actinidin, or zingibain, can also improve the protein digestion rate; however, the digestion rate is dependent on the plant enzyme used and protein characteristics. Sous vide processing improves the rate and extent of protein digestibility, but the protein digestion rate decreases with increasing temperature and heating time. Ultrasound, high pressure, or pulsed electric field treatments degrade the protein structure and increase the proteolytic enzyme contact area to improve the protein digestion rate.

• Proceedings of the KIEE Conference
• /
• 1979.08a
• /
• pp.153-154
• /
• 1979

• Journal of the Korean Mathematical Society
• /
• v.33 no.2
• /
• pp.455-468
• /
• 1996

Certain analytic behavior of geometric objects defined on a Riemannian manifold depends on some very crude properties of the manifold. Some of those crude invariants are the volume growth rate, isoperimetric constants, and the likes. However, these crude invariants sometimes exercise surprising control over the analytic behavior.