• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.552-554
• /
• 1999

Phonon scattering and impact ionization models have been presented to analyze hot carrier transport in high energy region, using full band model and Fermi's golden rule. We have investigated temperature dependent properties for impact ionization process of Si using realistic energy band structures at 77K and look. The realistic full band model, obtained from the empirical pseudopotential method with local from factors, is used to calculate scattering rate. The accurate calculation of impact ionization rate requires the use of a wavevector- and frequency-dependent dielectric function ξ ( q,$\omega$). The empirical phonon scattering rate P$\sub$ph/, is given by deriving from linear function for P$\sub$ph/ versus D(E) since the phonon scattering rate is linearly depended on density of states D(E). Impact ionization rate p,, is calculated from the first principle's theory. and fitted by modified Keldysh formula having power of above 2.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.2
• /
• pp.129-143
• /
• 2022

Background: Patient-controlled analgesia (PCA) has been widely used as an effective medical treatment for pain and for postoperative analgesia. However, improper dose errors in intravenous (IV) administration of narcotic analgesics from a PCA infusion pump can cause patient harm. Furthermore, opioid overdose is considered one of the highest risk factors for patients receiving pain medications. Therefore, accurate delivery of opioid analgesics is a critical function of PCA infusion pumps. Methods: We designed a microbalance method that consisted of a closed acrylic chamber containing a layer and an oil layer with an electronic balance. A commercially available infusion analyzer (IDA-5, Fluke Co., Everett, WA, USA) was used to measure the accuracy of the infusion flow rate from a commercially available smart PCA infusion pump (PS-1000, UNIMEDICS, Co., Ltd., Seoul, Korea) and compared with the results of the microbalance method. We evaluated the uncertainty of the flow rate measurement using the ISO guide (GUM:1995 part3). The battery life, delay time of the occlusion alarm, and bolus function of the PCA pump were also tested. Results: The microbalance method was good in the short-term 2 h measurement, and IDA-5 was good in the long-term 24 h measurement. The two measurement systems can complement each other in the case of the measurement time. Regarding battery performance, PS-1000 lasted approximately 5 days in a 1 ml/hr flow rate condition without recharging the battery. The occlusion pressure alarm delays of PS-1000 satisfied the conventional alarm threshold of occlusion pressure (300-800 mmHg). Average accuracy bolus volume was measured as 63%, 95%, and 98.5% with 0.1 ml, 1 ml, and 2 ml bolus volume presets, respectively. A 1 ml/hr flow rate measurement was evaluated as 2.08% of expanded uncertainty, with a 95% confidence level. Conclusion: PS-1000 showed a flow accuracy to be within the infusion pump standard, which is ± 5% of flow accuracy. Occlusion alarm of PS-1000 was quickly transmitted, resulting in better safety for patients receiving IV infusion of opioids. PS-1000 is sufficient for a portable smart PCA infusion pump.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1109-1114
• /
• 2003

In this paper, task control architecture is proposed for a mobile robot with behaviors based on cognition theory to endow the robot intelligence. In the task control architecture, task manager is introduced especially for the management of computational resource. The management is based on classical RMS (Rate Monotonic Strategy), but with online rate modulation strategy. The rate modulation is performed using the value variances of behavior execution for the task. Because the values are based on natively uncertain sensor information, they are modeled using PDF (probability Density Function). As a rate modulation process, the range of the rate modulation is defined firstly by real-time constraints of RMS and discrete control stability of behaviors. With the allowable range, rate modulations are performed considering harmonic bases to maintain utilization bound without decrease. To evaluate the efficiency of the proposed rate modulation strategy, a simulation test is performed to compare the efficiency between the control architecture with the proposed strategy and previous one. A performance index with the formalization of propensity of resource allocation is proposed and utilized for the simulation test. To evaluate the appropriateness of the performance index, the performance index is compared with practical one through a practical simulation test.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.321-325
• /
• 2004

Linear motor feed drive systems have been broadly used in machine tools or precision automatic feed systems. Recently, modem machine tools require high speed and high precision feed drive system to achieve high productivity. Unfortunately, a feed drive system, even though it was optimum designed, may experience severe transient vibrations during high-speed operation if its feed rate control is unsuitable. A rough feed rate curve having discontinuity in its acceleration profile causes a serious vibration problem in the feed slides system. This paper presents a feed rate optimization of a machine tool feed slide system, which is driven by a linear motor, for its minimum vibrations. Firstly, a 4-degree-of-freedom lumped parameter model is proposed for the vibration analysis of a linear motor driven machine tool feed drive system. Next, a feed rate optimization of the feed slide is carried out for minimum vibrations. The feed rate curve optimization strategy is to find out the most appropriate acceleration profile with jerk continuity. Of course, the optimized feed rate should approximate to the desired one as possible. A genetic algorithm with variable penalty function was used in this feed rate optimization.

• The Journal of Asian Finance, Economics and Business
• /
• v.4 no.1
• /
• pp.19-23
• /
• 2017

Based on a simultaneous-equation model consisting of aggregate demand and short-run aggregate supply, this paper estimates a reduced-form equation specifying that the equilibrium real GDP is a function of the real effective exchange rate, the government deficit as a percent of GDP, the real interest rate, foreign income, labor productivity, the real oil price, the expected inflation rate, and the interactive and intercept binary variables accounting for a potential change in the slope of the real effective exchange rate and shift in the intercept. Applying the exponential GARCH technique, it finds that aggregate output in Australia has a positive relationship with the real effective exchange rate during 2003.Q3 - 2013.Q2, the government deficit as a percent of GDP, U.S. real GDP, labor productivity and the real oil price and a negative relationship with the real effective exchange rate during 2013.Q3 - 2016.Q1, the real lending rate and the expected inflation rate. These results suggest that real appreciation was expansionary before 2013.Q3 whereas real depreciation was expansionary after 2013.Q2 and that more government deficit as a percent of GDP would be helpful to stimulate the economy. Hence, the impact of real appreciation or real depreciation on real GDP may change overtime.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.962-966
• /
• 2004

Ball screw feed drive systems have been broadly used in machine tools or precision automatic feed systems. Recently, modern machine tools require high speed and high precision and drive system to achieve high productivity. Unfortunately, a feed drive system, even though it was optimum designed, may experience severe transient vibrations during high-speed operation if its feed rate control is unsuitable. A rough feed rate curve having discontinuity in its acceleration profile causes a serious vibration problem in the feed slide system. This paper presents a feed rate optimization of a machine tool feed slide system, which is driven by a ball screw, for its minimum vibrations. Firstly, a 6-degree-of-freedom lumped parameter model was proposed for the vibration analysis of a ball screw driven machine tool feed drive system. Next, a feed rate optimization of the feed slide was carried out for minimum vibrations. The feed rate curve optimization strategy is to find out the most appropriate acceleration profile having finite jerk. Of course, the optimized feed rate should approximate to the desired one as possible. A genetic algorithm with variable penalty function was used in this feed rate optimization.

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.175-184
• /
• 1996

A nuclide transfer by utilizing mass transfer coefficient and barrier response function defined for each barrier is proposed, by which the final nuclide transfer rate into the sea water can be evaluated. When simple and immediate quantification of the nuclide release is necessary in the conservative aspect, using this kind of approach may be advantageous since each layered barrier can be treated separately from other media in series in the repository system, making it possible to apply separate solutions in succession to other various media. Although one disadvantage is that while flux continuity can be maintained at the interface by using the exit nuclide flux from the first medium as the source flux for the next one, there may be no guarantee for concentration continuity, this problem could be eliminated assuming that there is no boundary resistance to mass transfer across the interface. Mass transfer coefficient can be determined by the assumption that the nuclide concentration gradient at the interface between adjacent barriers remains constant and barrier response function is obtained from an analytical expression for nuclide flow rate out of each barrier in response to a unit impulse into the barrier multiplied by mass transfer coefficient. Total time-dependent nuclide transfer rate from the barrier can then be obtained by convoluting the response function for the barrier with a previously calculated set of time-varying input of nuclide flow rate for the previous barrier.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.255-261
• /
• 2005

The purpose of this study is to compare hepatotoxicity of each treatment for dermatophytosis; one is the administration of the ketoconazole only and the other, ketoconazole with diphenyl-dimeththyl-dicarboxylate. Have chosen the range of 14-24 months of healthy dogs divided by two groups (group 1 and group 2) for the experiment of which test proved positive in dermatophytosis diagnosis and showed normal reaction in terms of physical examination, blood chemistry and especially of liver function. Group 1 was administrated ketoconazole orally at 10 mg/kg/day and of same dose of ketoconazole with diphenyl-dimethyl-dicarboxylate for group 2. After administering, we have tested two groups by blood collecting every one week in order to check the differences of hepatotoxicity state through AST, ALT and r-GTP, the barometers of liver function which lasted for 12 weeks. Moreover, tested Indocyanine Green (ICG), known as susceptible gauge of function of excretion before starting the experiment and tested ICG as well after 12 weeks. The experiment of result the value of group 1 in AST, ALT and r-GTP has been highly rised after administering ketoconazole for 10 weeks meanwhile, of group 2 has shown a steady state troughout the whole experiment. For ICG test, we injected 0.5 mg/kg of ICG into a vein for both groups and tested the retention rate at regular interval of 15, 30, 45 minutes. The results of retention rate in two groups were similar to before the drug administration. However, after 12 weeks the retention rate of group 1 has been delayed, on the other hand, retention rate of group 2 were a steady state. In conclusion, the administration of ketoconazole only for a long period of time induced hepatotoxicity where as, the administration of ketoconazole with diphenyl-dimethyl-dicarboxylate didn't induce hepatotoxicity. Therefore, when doctors prescribes for a dog with dermatophytosis should not administrate ketoconnazole itself but with diphenyl-dimethyl-dicarboxylate and one who has abnormal condition of liver function should not be prescribed ketoconazole treatment. If there is a case needed to prescribe ketoconazole treatment, the regular monitoring should be accompanied by at the same time.

• Journal of Korean Academy of Nursing Administration
• /
• v.3 no.1
• /
• pp.93-106
• /
• 1997

By the increase of the rate of existence of the hemodialyzing patients, they were required the long run treatment. Regardless of medical insurance expansion, hemodialyzing cost much expenses so that hospital has been considering the reuse of hemodialyzer and flowing euqipments along with the diverse study and progress of the ways of hemodialyzing and medical instruments. This study was aimed to provide the basic materials regarding the reuse of hemodialyzer which is used for the patients of chronic renal disease. The reusing program in the artificial kidney center of K hospital has been used for this study from 50 patients aften one year result from Sep. 1995 through Aug. 1996. Automatic equipment of DRS-4 made by Seratronic Co., was used as the equipment and it was retreated with the function test simultaneously. Compliaction and confirmation of the infection were by the records of the hemodialysis of the patients. SPSS was used for the analysis of the materials by computerization. The character of the patients and the rate of removal was by mistake and percentage, function test and rate of complication by Ftest(ANOVA) and the rate of complication per items by ${\chi}^2$ and Ftest. As the post test the Duncan's test was used for the statistically significant different variables in the standard of p<.05 after Ftest. The followings are the summary of the result : 1) In the function test of the new hemodialyzer and the reused one, and in all of CA110 and CF15.11, the dialyzer ultrafiltration coeffient(KUf) was appeared to have been higher in the reusing groups than the first use ones. This has been the normal limit showing no troubles with them. 2) In the function test of the new and reused hemodialyzer, in all of CA110 and CF15.11, the total blood volume was appeared to have been the less value in the reuse groups than the new ones. This was the price within 80% of the first price that both showed possible for use. 3) The result of reuse hemodialyzer of CA110 was $29.48{\pm}7.83$ in average in the test of leak test while $17.3{\pm}7.96$ in reuse of CF15.11. The normal limit of <60 was the leak test result. So both of the hemodialyzer was normal for reuse. 4) The rate of removal of Blood Urea Nitrogen(BUN) was 72.25% in CA110 hemodialyzer by reusing 16-20 times as the highest rate showing the better result in the reuse hemodialyzer, while in CF15.11 hemodialyzer showed 71.16% by highest rate in the first use by the highest rate with no difference from the reuse. 5) The rate of removal of serum creatinine of CA110 was 64.08% by highest rate in reuse of 1-5 times by showing better result in reuse hemodialyzer. While in CF15.11 66.47% the highest by reuse of 16-20 times showing no difference from each other. 6) No patients were admitted or precribed by antibiotics in relation with reuse dialyzer and no reports were shown about hepatitis $B{\cdot}C$. AIDS in fection. 7) Of the total 248 episods of complication due to the hemodialyzing, 86 by first use, 73 by 1-5 times, 35 by 6-10 times, 35 by 11-15 times and 19 by 16-20 times have been shown which have had no significant difference between the groups. 8) In the comparison of the expense for the hemodialyzer, there was the effect of saving 11,597.6 Won between the first and reuse hemodialyzer. And by decreasing the extracted materials, they did the great role of disposing the waste matters.

• The Journal of the Korean life insurance medical association
• /
• v.2 no.1
• /
• pp.143-151
• /
• 1985

In medical selection of Daehan Education Insurance, We doubted that 140 cases(male 117 cases, female 23 cases) might have the fatty infiltration of the liver by ultrasonography. We examined the weight and the hypertension of 140 patients by biochemically analyzing the blood extracted under fasting according to the age-distribution. The results are as follows: 1. 90% out of them had body weight than normal subject. 34.29% out of them were hypertension patients and most of them were $30{\sim}39's$ and $40{\sim}49's$. 2. As compared with the normal subjects in serum lipid value, HDL cholesterol value was low, but total cholesterol, Triglyceride, phospholipid and total lipid value were significantly high. Especially the statistical value of Triglyceride was very significantly high. 3. Total abnormal rate of sGOT value in Liver function test is 34.43% and the mean value of it is 66 unit and the abnormal rate of sGPT value is all 3.14% and the value of it is 70 unit. 4. The abnormal rate of Alkaline phosphatase value is 9.29% and the abnormal rate of total Bilirubine value is 14.29%. As HBsAg positive rate is 2.14% and HBs Ab positive rate is 31.43%, the positive rate of HBsAg represents Lower positive rate than Korean mean value. 5. The abnormal rate of the fasting blood glucose is 15.00% and the abnormal rate of Blood sugar pc 2hrs is 30.71%. 6. The abnormal case of protein, Albumin, Globulin, BUN, craetinine and Hemoglobin value was not found to any of them and in the above liver function test except serum lipid value, the rate not showing the abnormal value represents 45.3%(male) and 52.17%(female).