• Corrosion Science and Technology
• /
• 제4권5호
• /
• pp.201-206
• /
• 2005

Starting with the meaning of the word quality, diverse concepts connoted by the term are examined. Instead of a bathtub curve, the desirable shape of a failure rate covering the entire life of a good product, which might be called hockey-stick line, is introduced. From the hockey-stick line and the definition of reliability, two measurements are extracted. The terms r-reliability (failure rate) and durability (product life) are explained. The conceptual analysis of failure mechanics explains that reliability technology pertains to design area. The desirable shape of hazard rate curve of electronic items, hockey-stick line, clarifies that Mean-Time-to-failure (MTTF) as the inverse of failure rate can be regarded a nominal life. And Bx life, different from MTTF, is explained. Reliability relationships between components and set products are explained. Reshaped definitions of r-reliability and durability are recommended. The procedure to improve reliability and the reasons for failing to identify failure mode are clarified in order to search right solutions. And generalized Life-Stress failure model is recommended for the calculation of acceleration factor.

• 한국CDE학회지
• /
• 제21권2호
• /
• pp.50-60
• /
• 2015

Corresponding to the high consumption rate of the selfie stick for cell phone camera, the design of the product is becoming diverse. However, relatively low cost selfie stick models are not strong enough to stand the weight of the cell phone. This results into a bending of the stick or the accidental fall of the cell phone by the failure of the holding unit. As a solution to the problem, design of selfie stick that is structurally strong enough to stand the weight of the cell phone with the minimum weight for the portability is proposed in this paper.

• Tribology and Lubricants
• /
• 제18권1호
• /
• pp.55-60
• /
• 2002

In many dynamic systems, there are unwanted oscillation which may arise the reduction of performance. Especially in low sliding speed condition, the stick-slip is an important issue because it because unstable motion as well as inaccurate position control in the system. Most previous works on the stick-slip are, however, only concerned with simple modeling under the condition of constant normal force. The normal force and the amount of hydraulic oil are variable with a cylinder stroke in the telescopic boom. This paper presents the pressure variations during stick-slip with the cylinder of telescope boom. Pressure variations by stick-slip has a similar pattern to that of single mass-spring model. The stick-slip is gradually decreased by means of increased flow rate.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.428-441
• /
• 2015

Corresponding to the high consumption rate of the selfie stick for cell phone camera, the design of the product is becoming diverse. However, relatively low cost selfie stick models are not strong enough to stand the weight of the cell phone. This results into a bending of the stick or the accidental fall of the cell phone by the failure of the holding unit. As a solution to the problem, design of selfie stick that is structurally strong enough to stand the weight of the cell phone with the minimum weight for the portability is proposed in this paper.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.89-91
• /
• 2012

The numerical simulation for detonation failure of ammonium nitrate (AN) based non-ideal explosives is carried out with an accurate and state-of-the-art Eulerian method. Detonation failure is readily observed in the rate stick experiments utilizing the AN mixture explosives and the inert confinements of varying thicknesses. The composition of non-ideal explosives and thickness of the confinements influence the characteristics of detonation failure. Calculated results are compared against the experimental data of both unconfined and confined rate stick problems and provide a reliable guideline to establish a fine-tuned chemical kinetic model for detonation failure.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.279-283
• /
• 2018

In this study, we investigate the behavior of abrasive particles and change of the stick-slip pattern according to chemical mechanical polishing (CMP) process parameters when a large number of abrasive particles are fixed on a pad. The CMP process is simulated using the finite element method. In the simulation, the abrasive grains are composed of those used in the actual CMP process. Considering the cohesion of the abrasive grains with the start of the CMP process, abrasive particles with various sizes are fixed onto the pad at different intervals so that stick-slip could occur. In this analysis, we determine that when the abrasive particle size is relatively large, the stick-slip period does not change as the pressure increases while the moving speed is constant. However, if the size of the abrasive grains is relatively small, the amount of deformation of the grains increases due to the elasticity of the pad. Therefore, the stick-slip pattern may not be observed. As the number of abrasive particles increases, the stick-slip period and displacement decrease. This is consistent with the decrease in the von Mises yield stress value on the surface of the wafer as the number of abrasive grains increases. We determine that when the number of the abrasive grains increases, the polishing rate, and characteristics are improved, and scratches are reduced. Moreover, we establish that the period of stick-slip increases and the change of the stick-slip size was not large when the abrasive particle size was relatively small.

• 대한간호학회지
• /
• 제36권6호
• /
• pp.992-1001
• /
• 2006

Purpose: This study was done to provide data for a nursing intervention to alleviate newborn pain clinically by investigating the effect of oral glucose. Methods: Subjects were newborns hospitalized in the nursery. Informed consent was obtained from parents of 60 newborns. A heel stick was carried out for a test on 3 groups; the experimental, placebo, and control group. The Neonatal infant pain scale(NIPS), respiration rate, heart rate, peripheral oxygen partial pressure($SpO_2$), and crying duration were measured to assess pain reaction. All neonatal behaviors were recorded on videotape. Results: There were significant differences in pain behavior during stimulus(F=4.195, p=.020), pain behavior immediately after blood-sampling (F=4.114, p=.021), and pain behavior 3 minutes after that (F=3.630, p=.033). However, there were no significant differences in heart rate, respiration rate, peripheral oxygen partial pressure or crying duration after the heel stick among the groups. Conclusions: Oral administration of glucose before a heel stick caused the reduction of neonatal pain behavior, which means that it has an effect of pain relief.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.274-278
• /
• 2011

다양한 고에너지 물질이 포함된 폭발 장치를 정확하게 해석하기 위해서는 고에너지 물질의 다양한 연소 현상과 주변을 둘러싸고 있는 고체물질에 대한 대변형 현상을 정확하게 모사하는 것이 필수적이다. 이를 위하여 본 연구에서는 다중물질 각각의 경계면을 level set 함수를 이용하여 정확하게 표현하였으며, 경계면은 ghost fluid 기법을 사용하여 나타내었다. 각각의 물질에 대하여 대변형에 적합한 구성방정식을 사용하였으며, 지배방정식을 고차의 수치해석 기법을 사용하여 해석하였다. 다양한 폭발장치 중 실험적인 데이터를 이용하여 검증이 가능한 rate stick 문제를 해석하였으며, 실험과 유사한 결과를 획득하였다.

• International Journal of Reliability and Applications
• /
• 제2권3호
• /
• pp.161-187
• /
• 2001

Starting with the meaning of the word quality, diverse concepts connoted by the term are examined. Instead of a bathtub curve, the desirable shape of a failure rate covering the entire life of a good product, which might be called hockey-stick line, is introduced. From the hockey-stick line and the definition of reliability, two measurements are extracted. The terms reliability, failure rate, product life, and durability are explained. From the customer's standpoint, the concept of product quality is classified in five factors, according to related technology: performance, reliability, conformance to specifications, customer perception, and fundamentals advantage. The correlation of the five factors for a first-class product is discussed, Since the market share of a company is determined as the competition result of its product value, defined as product quality and price, the market share increase is derived mathematically from the increment of product value. The market share increase, $\Delta$S, can be calculated from the present market share, S, and the oriented relative value increment of new product, R, to the current product in the same company for the same market target: $\Delta$S : $\Delta$(1-S). R/(1+S.R). Finally, the importance of separating warranty cost from the profit equation for the durables is explained.

• 대한화학회지
• /
• 제42권1호
• /
• pp.22-27
• /
• 1998

여러 가지 용매에서 N,N-dimethylaniline에 의한 coumarin 153과 coumarin 481분자의 형광소광효과를 조사하였다. 소광속도상수와 분자의 확산속도상수간의 관계로부터 소광과정이 분자의 확산과 어느정도 상호연관성을 갖고 있음을 알 수 있었다. slip boundary조건 보다stick boundary 조건을 적용하였을 때 분자확산 속도상수와 실험적인 소광속도상수와의 차이가 작게 나타났다. cyclohexane 과 같은 비극성용매에서의 소광속도 상수는 이론적인 확산속도상수 값과 오차범위 내에서 거의 일치하였으나 acetonitrile과 같은 극성용매에서는 소광속도상수는 확산속도상수보다 일관되게 작게 나타났다. 이것은 coumarin 분자의 형광소광이 분자간 확산에 의한 충돌 뿐만 아니라 분자내 전하분리와 같은 과정에 의해서도 진행되는 것으로 해석할 수 있다.