• International Journal of Reliability and Applications
• /
• 제18권1호
• /
• pp.9-20
• /
• 2017

In this paper, we consider a renewable repair-replacement warranty strategy with age-dependent minimal repair service and propose an optimal maintenance model during post-warranty period. Such model implements the repair time limit under warranty and follows with a certain form of system maintenance strategy when the warranty expires. The expected cost rate is investigated per unit time during the life period of the system as for the standard for optimality. Based on the cost design defined for each failure of the system, the expected cost rate is derived during the life period of the system, considering that a renewable minimal repair-replacement warranty strategy with the repair time limit is provided to the customer under warranty. When the warranty is finished, the maintenance of the system is the customer's responsibility. The life period of the system is defined and the expected cost rate is developed from the viewpoint of the customer's perspective. We obtain the optimal maintenance strategy during the maintenance period by minimizing such a cost rate after a warranty expires. Numerical examples using field data are shown to exemplify the application of the methodologies proposed in this paper.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.172-175
• /
• 2009

The purpose of this study is to predict the forming limit diagram (FLD) of strain-rate sensitive materials on the basis of the Marciniak and Kuczynski (M-K) theory. The strain-rate effect is taken into consideration in such a way that the stress-strain curves for various strain-rates are inputted into the formulation as point data, not as curve-fitted models such as power function. To solve the nonlinear system of equations derived from the equilibrium and constraints in the groove region and the safe zone, the Newton-Raphson method is used. The theoretical FLDs using four different yield criteria, that are von Mises, Hill (1948), Hill (1979), Logan and Hosford, are compared with the experimental, numerical (FEA) and other theoretical results. A new trial is made where a modified M-K model having n-step grooves is introduced to describe a real localized neck.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.96-96
• /
• 2020

In order to establish the risk criteria of inundation due to typhoons or heavy rainfall, research is underway to predict the limit rainfall using basin characteristics, limit rainfall and artificial intelligence algorithms. In order to improve the model performance in estimating the limit rainfall, the learning data are used after the pre-processing. When 50.0% of the entire data was removed as an outlier in the pre-processing process, it was confirmed that the accuracy is over 90%. However, the use rate of learning data is very low, so there is a limitation that various characteristics cannot be considered. Accordingly, in order to predict the limit rainfall reflecting various watershed characteristics by increasing the use rate of learning data, the watersheds with similar characteristics were clustered. The algorithms used for clustering are K-Means, Agglomerative, DBSCAN and Spectral Clustering. The k-Means, DBSCAN and Agglomerative clustering algorithms are clustered at the impervious area ratio, and the Spectral clustering algorithm is clustered in various forms depending on the parameters. If the results of the clustering algorithm are applied to the limit rainfall prediction algorithm, various watershed characteristics will be considered, and at the same time, the performance of predicting the limit rainfall will be improved.

• 한국지반환경공학회 논문집
• /
• 제15권5호
• /
• pp.67-74
• /
• 2014

본 연구에서는 점토의 액성한계에 따른 압밀특성을 연구하기 위하여 일정한 압력으로 예압밀 된 재성형 점토를 이용하여 표준압밀시험과 일정변형률 압밀시험을 수행하였다. 압밀시료들은 카올리나이트에 중량대비 6 %, 9 %, 12 %, 15 %의 벤토나이트를 혼합하여 제작하였으며, 시료들의 액성한계시험을 수행한 결과 각각 77 %, 84 %, 88 %, 91 %의 값을 얻을 수 있었다. 또한 액성한계의 약 2배의 증류수를 첨가 후 충분히 교반하여 0.2 MPa의 일정한 압력조건하에 예압밀시켜 제작하였다. 최근 일반적으로 사용되고 있는 표준압밀시험과 ASTM, D4186-82에 따라 변형률 속도를 0.001 %/min, 0.004 %/min, 0.01 %/min을 적용하여 일정변형률 압밀시험을 수행하고 선행압밀하중을 0.2 MPa의 예압밀압력에 대해서 비교 분석하였다. 그 결과 액성한계가 낮을수록 빠른 변형률 속도에서 선행압밀하중이 예압밀압력과 유사하게 나타났으며, 액성한계가 높을수록 느린 변형률 속도에서 선행압밀하중이 예압밀압력과 유사하게 나타났다.

• 한국ITS학회 논문지
• /
• 제22권2호
• /
• pp.164-181
• /
• 2023

낮은 제한속도 환경에서 무인 교통단속 장비의 속도위반 단속 허용범위는 매우 높으며. 이는 제한속도 준수율이 낮은 주요인 중 하나이다. 이에 따라 본 연구에서는 무인 교통단속 장비의 속도위반 허용범위를 개선하여, 새로운 제한속도별 허용범위 기준을 제시하였다. 먼저 운전자에게 과속을 유발할 수 있는 운영자·이용자 측면의 오차 실효성을 분석하고, 분석 결과에 따라 단속 장비 오차와 내비게이션 GPS 속도 오차를 적용하여 허용범위 개선안을 제시하였다. 또한, 허용범위 개선 시 운영자 측면에서 장기적으로 기대되는 사고율 및 사고 심각도 등 안전성 효과를 추정하였다. 추정 결과 모든 제한속도의 도로구간에서 제한속도 준수율, 사고율, 속도 변화에 따른 심각도별 사고건수 변화율, 보행자 교통사고 사망률 모두 개선되었다. 따라서 본 연구에서 제시한 속도위반 단속 허용범위 개선안이 도입될 경우, 추정한 개선 효과와 같이 도로의 안전성이 향상될 것으로 기대된다.

• 한국환경과학회지
• /
• 제4권1호
• /
• pp.91-103
• /
• 1995

The reaction rate, equilibrium, and flow injection analysis methods were fundamentally evaluated for the determination of aqueous ammonia. The selected indophenol blue method was based on the formation of indophenol blue in which ammonium ion reacted with hypochlorite and phenol in alkaline solution. In the optimized reaction condition, the reaction followed 1st order reaction kinetics and the final product was stable. The absorbance measurements before and after the equilibrium were utilized for the reaction rate and equilibrium methods. The reaction rate methods, based on the relative analytical signals for the possibility of eliminating interferents, were shown to have good linear calibration curves but the detection limit and the calibration sensitivity were poorer than those in the equilibrium method. The detection limits were 32-49 pub and 24 pub for the reaction rate and equilibrium methods, respectively In the flow injection analysis, the absorbance was measured before the equilibrium reached and thus resulted in 30% reduction of calibration sensitivity. However, the detection limit was 11 ppb, indicating that the peak-to-peak noise for the blank was remarkably improved. Compared to the manual methods, the optimized experimental condition in a closed reaction system reduced the blank absorbance and the inclusion of ammonia from the atmosphere was prevented. In addition, highly reproducible mixing of sample and reagents and analytical data extracted from continuous recording showed excellent reproducibility.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.38-44
• /
• 2003

In this study, endurance limit and fatigue behavior of load carrying fillet welded cruciform joints depending on commonly used welding methods such as SMAW, SAW, MIG and FCAW are investigated. In respect of endurance limit SMAW specimen showes highest result, and then MIG, SAW, FCAW in descending order. However, SMAW specimen showes lowest crack growth rate and it followed by MIG, FCAW, SAW. By these results, it is needed to use SMAW or MIG welding methods for welding structures with small welding capacity and SAW or FCAW methods for large welding structures with respect to economic benefits and operation efficiency of welding. It was also shown fatigue crack growth rate was more influenced by the strenght of welding materials than the endurance limit of welding materials.

• Nuclear Engineering and Technology
• /
• 제33권5호
• /
• pp.498-513
• /
• 2001

Performed here is a comparative assessment study for the generation of the pressure- temperature (P/T) limit curve of the reactor vessel. Using the cooling or heating rate and vessel material properties, the stress distribution is obtained to calculate stress intensity factors, which are compared with the material fracture toughness to determine the relations between operating pressure and temperature during cool-down and heat-up. P/T limit curves are generated with respect to crack direction, clad thickness, toughness curve, cooling or heating rate and neutron fluence, and their results are compared.

• Structural Engineering and Mechanics
• /
• 제14권2호
• /
• pp.191-208
• /
• 2002

A comparative assessment study for a generation of the pressure-temperature (P-T) limit curve of a reactor vessel is performed in accordance with ASME code. Using cooling or heating rate and vessel material properties, stress distribution is obtained to calculate stress intensity factors, which are compared with the material fracture toughness to determine the relations between operating pressure and temperature during reactor cool-down and heat-up. P-T limit curves are analyzed with respect to defect orientation, clad thickness, toughness curve, cooling or heating rate and neutron fluence. The resulting P-T curves are compared each other.

• 품질경영학회지
• /
• 제26권1호
• /
• pp.61-73
• /
• 1998

The quality control literature contains a substantial number of articles concerned with how to optimally choose control limits in order to minimize production cost. The purpose of the this study is to determine the economic setting for the process mean of an industrial process. In this study it is assumed that the lower control limit is set by government regulations and the u, pp.r limit and process mean are chosen based on economic considerations. Much research has been conducted on this problem under the condition of the fixed rpm(rate per minute). However a variance can be increased in proportion to the level of rpm and the increase of the variance can change the optimal process mean. Therefore, it is desirable to determine both the process mean and the level of rpm simultaneously. In this paper, a mathematical model is presented which considers the u, pp.r limit and the rpm as variables.