• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.414-435
• /
• 2017

As network adaptive streaming technology becomes increasingly common, transport protocol also becomes important in guaranteeing the quality of multimedia streaming. At the same time, because of the appearance of high-quality video such as Ultra High Definition (UHD), preventing buffering as well as preserving high quality while deploying a streaming service becomes important. The Internet Engineering Task Force recently published Multipath TCP (MPTCP). MPTCP improves the maximum transmission rate by simultaneously transmitting data over different paths with multiple TCP subflows. However, MPTCP cannot preserve high quality, because the MPTCP subflows slowly increase the transmission rate, and upon detecting a packet loss, drastically halve the transmission rate. In this paper, we propose a new multipath congestion control scheme for high-quality multimedia streaming. The proposed scheme preserves high quality of video by adaptively adjusting the increasing parameter of subflows according to the network status. The proposed scheme also increases network efficiency by providing load balancing and stability, and by supporting fairness with single-flow congestion control schemes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1253-1256
• /
• 1996

In this paper, a new nonlinear feedback linearization control scheme for induction motors is developed. The control scheme employs a fuzzy nonlinear identification scheme based on fuzzy basis function expansion to adoptively compensate the parameter variations, i.e. rotor resistance, mutual and self inductance etc. An important feature of the proposed control scheme is to incorporate the sliding mode controller into the scheme to speed up convergence rate. Simulation tests show the robust behavior of the proposed controller in the presence of the parameter uncertainties of the machine.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.395-400
• /
• 2005

The IEEE 802.11b WLAN supports multiple transmission rates and the rate is chosen in an adaptive manner by an auto rate control algorithm. This auto rate control algorithm deeply affects the total system performance of the IEEE 802.11b WLAN. In this paper, we examine the WLAN performance with regard to the auto rate control algorithm especially the ARF scheme. The experimental results indicate that the ARF scheme works well in the face of signal noise due to node location. However, the ARF scheme severely degrades system performance when multiple nodes contend to obtain the wireless channel and the packet is lost due to signal collision. In addition, TCP prevent the performance degradation due to ARF scheme by retaining number of active nodes. However, some applications, such as transporting multimedia data, adopt the UDP. Therefore, the TCP cannot be an optimal solution for all WLAN applications.

• ETRI Journal
• /
• v.18 no.2
• /
• pp.61-74
• /
• 1996

We propose two new rate control schemes to improve MPEG-2 rate control in view of visual quality when scene changes happen. Two proposed schemes are characterized by real-time and non real-time improvement to reduce the impact of scene changes. We also propose a new target-bit prediction method using spatial activity of pictures and present a simple and efficient scene change detection scheme using signed difference of mean absolute difference (MAD). Computer simulation results show that the proposed real-time algorithm effectively alleviates visual quality degradation after scene changes. The proposed non real-time algorithm gives maximum 2 dB improvement in peak signal-to-noise ratio (PSNR) at a scene-changed picture, compared with MPEG-2 rate control scheme and it shows better quality than the real-time one.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.931-942
• /
• 1999

This paper develops a 3 DOF vehicle model which includes lateral, roll and yaw motion to study a 4WS vehicle. The model is used for the simulation of a 4WS vehicle behavior, and to derive a control algorithm for rear wheel steering. This paper uses a feedforward plus feedback control scheme to compute a rear wheel steering angle. The feedforward control scheme for computing the first rear wheel steering angle uses a gain which is acquired by multiplying a proper value on a gain to maintain a zero sideslip angle. The feedback control scheme for computing the second rear wheel steering angle uses fuzzy logic and model following control scheme. A linear 2 DOF model is used as a reference model for model following control, and is derived from the developed 3 DOF model by neglecting sprung mass roll motion. A reference state variable is yaw rate, and is computed using the linear 2 DOF model. J-turn and lane change maneuver simulation are performed to show the effectiveness of the developed control scheme. The simulation results show that the 4WS vehicle with the developed control scheme has much better performance in yaw rate, lateral acceleration, roll angle, and sideslip angle than the 2WS vehicle. Also, the results show that the performance of the developed control is close to the one of an optimal control which assumes all states are perfect.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1982-1985
• /
• 2003

Future cellular networks will mainly be driven by, high quality channels, high band with utilization, low power consumption and efficient network management. For a given channel allocation, the capacity and quality of communication of cellular radio systems using CDMA(Code Division Multiple Access) can be increased by using a transmitter power control scheme to combat the near-far problem. Centralized power control schemes or distributed ones to maximize the minimum signal-to-interference in each user of CDMA wireless network have been investigated. This paper has proposed a distributed power control algorithm, which employs an adaptive search scheme, in order to solve quickly the linear systems of equations for power update in CDMA cellular radio systems. The simulation results show that the proposed scheme has faster convergence rate than the typical bang-bang type of distributed power control algorithm, which has been much used as a reference algorithm in IS-95A and W-CDMA communication network.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.2
• /
• pp.79-86
• /
• 2016

In wireless sensor networks, increasing the sensing rate of each node to improve the data accuracy usually incurs a decrease of network lifetime. In this study, an energy-adaptive data compression scheme is proposed to efficiently control the sensing rate in an energy-harvesting wireless sensor network (WSN). In the proposed scheme, by utilizing the surplus energy effectively for the data compression, each node can increase the sensing rate without any rise of blackout time. Simulation result verifies that the proposed scheme gathers more amount of sensory data per unit time with lower number of blackout nodes than the other compression schemes for WSN.

• International Journal of Contents
• /
• v.7 no.1
• /
• pp.8-13
• /
• 2011

For energy-efficiency in Wireless Sensor Networks (WSNs), when a sensor node detects events, the sensing period for collecting the detailed information is likely to be short. The lifetime of WSNs decreases because communication modules are used excessively on a specific sensor node. To solve this problem, the TARP decentralized network packets to neighbor nodes. It considered the average data transmission rate as well as the data distribution. However, since the existing scheme did not consider the energy consumption of a node in WSNs, its network lifetime is reduced. In this paper, we propose an energy awareness congestion control scheme based on genetic algorithms in WSNs. The proposed scheme considers the remaining amount of energy and the transmission rate on a single node in fitness evaluation. Since the proposed scheme performs an efficient congestion control, it extends the network lifetime. In order to show the superiority of the proposed scheme, we compare it with the existing scheme through performance evaluation. It is shown that the proposed scheme enhances the data fairness and improves the network lifetime by about 27% on average over the existing scheme.

• Journal of Korea Multimedia Society
• /
• v.15 no.9
• /
• pp.1086-1092
• /
• 2012

In this paper, we propose the rate control scheme reducing frame skipping at low bit-rate. As the method considering lossy parts in the compressing process at the existing scheme, the proposed scheme is improved by subtracting the converted bits from the target bit-rate of the current frame. The converted bits are the value resulted from multiplying the ratio of the current frame MAD to the previous frame MAD by the compressed bits changed from the remaining values after compressing the previous frame.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.534-542
• /
• 1999

A sell-designed rate control strategy can improve overall picture quality for video transmission over a constant bit rate channel and the rate control method is not a normative part of MPEG-video standard, the performance of MPEG video codec can be quite different depends on how to implement the rate control scheme. The rate control scheme proposed in MPEG show good results when scene changes is not occurred. But it has weakness that it does not properly handle scene-changed pictures. Therefore picture quality after scene change is deteriorated, and possibility of overflow occurrence becomes high. In this paper, a new method for detection of scene change occurrence using local variance and a new determination scheme for adaptive quantization parameter, mqunt, which can consider local characteristic of an image by using previously computed the local variance from the scene change detection part are proposed. IN addition, and adaptive rate control scheme which can handles scene changed picture very efficiently by scene-changed picture is proposed. Computer simulations are performed to verify the performance of the proposed algorithm. The suggested detection algorithm precisely detected scene change. And the proposed rate control scheme shows better rate control performance as compared with that of the conventional MPEG scheme.