• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.89-97
• /
• 2008

In wireless personal area networks (WPANs), the successful design of channel time allocation algorithm is a key factor in guaranteeing the various quality of service (QoS) requirements for the stringent real-time constraints of multimedia services. In this paper we propose a channel time allocation algorithm for achieving a high quality transmission and high channel error tolerance of MPEG stream in the IEEE 802.15.3 high-rate wireless PANs. Our algorithm exploits the characteristics of MPEG stream. When a new MPEG stream arrives, a DEV models it by the traffic envelope and delivers the traffic envelope to the piconet coordinator (PNC) along with the channel time request. The PNC performs channel time allocation according to the envelope. Performance of the proposed scheme is investigated by simulation and analysis. Our results show that compared to conventional scheme, the proposed scheme is very effective and provides a good performance under typical channel error conditions.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.375-386
• /
• 2016

Most existing studies on broadcast services in orthogonal frequency division multiplexing (OFDM) systems have focused on how to allocate the transmission power to the subcarriers. However, because a broadcasting system must guarantee quality of service to all users, the performance of the broadcast service dominantly depends on the channel state of the user who has the lowest received signal-to-noise ratio among users. To reduce the effect of the worst user on the system performance, we propose a joint delivery scheme of unicast and broadcast transmissions in OFDM systems with broadcast and unicast best-effort users. In the proposed joint delivery scheme, the BS delivers the broadcast information using both the broadcast and unicast subcarriers at the same time in order to improve the performance of the broadcast service. The object of the proposed scheme is to minimize the outage probability of the broadcast service while maximizing the sum-rate of best-effort users. For the proposed joint delivery scheme, we develop an adaptive power and subcarrier allocation algorithm under the constraint of total transmission power. This paper shows that the optimal power allocation over each subcarrier in the proposed scheme has a multi-level water filling form. Because the power allocation and the subcarrier assignment problems should be jointly solved, we develop an iterative algorithm to find the optimal solution. Numerical results show that the proposed joint delivery scheme with adaptive power and subcarrier allocation outperforms the conventional scheme in terms of the outage probability of the broadcast service and the sum-rate of best-effort users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1067-1074
• /
• 2004

In the wireless mobile networks, it IS important to provide the quality-of-service (QoS) guarantees as they are increasingly expected to support the multimedia applications Although the QoS provisioning problem arises in the wire-line networks as well, the mobility of hosts and the scarcity of bandwidth make QoS provisioning a challenging task in wireless mobile networks. The resource allocation to multimedia applications of varying QoS reqUlrement 15 a complex issue. In this paper, we propose a new adaptive resource allocation scheme based on the concept of the resource reservation and the renegotiation in order to guarantee the QoS of the real-tune traffic. The proposed scheme is aimed at improving the perfonnance in terms of the new call blocking rate, the bandoff dropping rate, and the bandwIdth utilization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1040-1046
• /
• 2022

In this paper, we consider a system with massive user equipments (UEs) in a cell and assume path loss and Rayleigh fading channels between the base station (BS) and UEs. In addition, it is assumed that the system bandwidth consists of multiple identical frequency subchannels. Under such assumptions, we propose a channel state information (CSI) feedback scheme and a resource allocation scheme for non-orthogonal multiple access (NOMA) transmission in order to reduce the feedback overhead of CSI generated by massive UEs and to reduce the complexity of resource allocation. In particular, for the proposed schemes, we analyze the sum data rate achievable by massive UEs in a cell and the outage probability with which the UEs in a cell do not meet the target data rate. Through the simulation results, we show that the proposed schemes can provide the superior outage probability, although it degrades the average sum data rate.

• Journal of Information Processing Systems
• /
• v.11 no.2
• /
• pp.295-309
• /
• 2015

Beacon scheduling is considered to be one of the most significant challenges for energy-efficient Low-Rate Wireless Personal Area Network (LR-WPAN) multi-hop networks. The emerging new standard, IEEE802.15.4e, contains a distributed beacon scheduling functionality that utilizes a specific bitmap and multi-superframe structure. However, this new standard does not provide a critical recipe for superframe duration (SD) allocation in beacon scheduling. Therefore, in this paper, we first introduce three different SD allocation approaches, LSB first, MSB first, and random. Via experiments we show that IEEE802.15.4e DSME beacon scheduling performs differently for different SD allocation schemes. Based on our experimental results we propose an adaptive SD allocation (ASDA) algorithm. It utilizes a single indicator, a distributed neighboring slot incrementer (DNSI). The experimental results demonstrate that the ASDA has a superior performance over other methods from the viewpoint of resource efficiency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1179-1184
• /
• 2014

Reliability allocation is generally used during the early stage of system development to apportion the system reliability target to its individual modules. This paper presents a comprehensive method for performing the reliability allocation of KTX door systems. Nine criteria for reliability allocation include failure criticality, operating time, risk, complexity, failure rate, maintenance, manufacturing technology, working condition, and reliability cost. For satisfying the system reliability target, the allocated $B_{10}$ lives of four modules are provided.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.156-163
• /
• 2016

There exists required safety integrity level (SIL) to assure safety in accordance with international standards for every electrical / electronics / control equipment or systems with safety related functions. The SIL is allocated from lowest level (level 0) to highest level (level 4). In order to guarantee certain safety level that is internationally acceptable, application of methodology for SIL allocation and demonstration based on related international standards is required. However, the theoretical and practical study for safety integrity level is barely under way in the domestic railway industry. This research studied not only the global process of SIL allocation to guarantee safety in accordance with international standards for safety related equipment and system, but the quantitative methodology based on international standard and the semi-quantitative methodology as alternative way for SIL allocation. Specifically, the systematic SIL allocation for platform screen door system of railway is studied applying the semi-quantitative methodology in order to save much time and effort compared to quantitative method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.1-19
• /
• 2015

With the recent popularity of smart terminals, the demand for high-data-rate transmission is growing rapidly, which brings a new challenge for the traditional cellular networks. Both device-to-device (D2D) communication and small cells are effective to improve the transmission efficiency of local communication. In this paper, we apply D2D communication into a small cell network system (SNets) and study about the optimization problem of resource allocation for D2D communication. The optimization problem includes system scheduling and resource allocation, which is exponentially complex and the optimal solution is infeasible to achieve. Therefore, in this paper, the optimization problem is decomposed into several smaller problems and a hierarchical scheme is proposed to obtain the solution. The proposed hierarchical scheme consists of three steps: D2D communication groups formation, the estimation of sub-channels needed by each D2D communication group and specific resource allocation. From numerical simulation results, we find that the proposed resource allocation scheme is effective in improving the spectral efficiency and reducing the outage probability of D2D communication.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1111-1130
• /
• 2016

Cooperative communications can significantly improve the wireless transmission performance with the help of relay nodes. In cooperative communication networks, relay selection and power allocation are two key issues. In this paper, we propose a relay selection and power allocation scheme RS-PA-PSACO (Relay Selection-Power Allocation-Particle Swarm Ant Colony Optimization) based on PSACO (Particle Swarm Ant Colony Optimization) algorithm. This scheme can effectively reduce the computational complexity and select the optimal relay nodes. As one of the swarm intelligence algorithms, PSACO which combined both PSO (Particle Swarm Optimization) and ACO (Ant Colony Optimization) algorithms is effective to solve non-linear optimization problems through a fast global search at a low cost. The proposed RS-PA-PSACO algorithm can simultaneously obtain the optimal solutions of relay selection and power allocation to minimize the SER (Symbol Error Rate) with a fixed total power constraint both in AF (Amplify and Forward) and DF (Decode and Forward) modes. Simulation results show that the proposed scheme improves the system performance significantly both in reliability and power efficiency at a low complexity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1390-1405
• /
• 2014

This paper investigates optimal relay selection and power allocation under an aggregate power constraint for cooperative wireless sensor networks assisted by amplify-and-forward relay nodes. By considering both transmission power and circuit power consumptions, the received signal-to-noise ratio (SNR) at the destination node is calculated, based on which, a relay selection and power allocation scheme is developed. The core idea is to adaptively adjust the selected relays and their transmission power to maximize the received SNR according to the channel state information. The proposed scheme is derived by recasting the optimization problem into a three-layered problem-determining the number of relays to be activated, selecting the active relays, and performing power allocation among the selected relays. Monte Carlo simulation results demonstrate that the proposed scheme provides a higher received SNR and a lower bit error rate as compared to the average power allocation scheme.