• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.178-181
• /
• 2011

Recently, micro shock tube is being extensively used in various fields of engineering applications. The flow characteristics occurring in the micro shock tube may be significantly different from that of conventional macro shock tube due to very low Reynolds number and Knudsen number effects which are, in general, manifested in such flows of rarefied gas, solid-gas two-phase, etc. In these situations, Navier-Stokes equations cannot properly predict the micro shock tube flow. In the present study, a two-dimensional CFD method has been applied to simulate the micro shock tube, with slip velocity and temperature jump boundary conditions. The effects of wall thermal conditions on the unsteady flow in the micro shock tube were also investigated. The unsteady behaviors of shock wave and contact discontinuity were, in detail, analyzed. The results obtained show much more attenuation of shock wave, compared with macro-shock tubes.

• 한국항공우주학회지
• /
• 제47권3호
• /
• pp.169-176
• /
• 2019

본 연구에서는 희박기체 환경의 유동 정보를 효과적으로 계산하기 위해 CFD 해석기법과 DSMC 해석기법 간 연계 해석을 수행하는 CFD/DSMC 혼합해석기법을 개발하였으며, 개발된 해석기법을 이용하여 천이영역에서의 고속 비행체 주위 유동에 대한 해석을 수행하였다. 해석 형상으로는 콘과 실린더 형태로 이루어진 FRESH-FX 형상으로 고려하였고, 혼합해석기법의 결과는 순수 CFD 및 DSMC 해석 결과와 비교하였다. 천이영역의 대기가 상대적으로 희박하여 초음속 유동에서 발생하는 충격파의 구배 및 세기가 약화된 것을 확인하였다. 순수 CFD 해석 결과와는 차이를 보였고, 순수 DSMC 해석 결과와 거의 일치하는 결과를 도출하는 것을 확인하였다. 또한, 순수 DSMC 계산시간보다 해석 시간이 감소하였다. 이를 통해 혼합해석기법의 결과에 대한 신뢰성 및 해석 시간에서의 효율을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.106-112
• /
• 2004

A kinetic theory analysis is made of low-speed gas flows around a micro-plate. The Boltzmann equation simplified by a collision model is solved by means of a finite difference approximation with the discrete ordinate method. The method does not suffer from statistical noise which is common in particle based methods and requires much less amount of computational effort. Calculations are made for flows around a micro-scale flat plate with a finite length of 20 microns. The method is assessed by comparing the results with those from several different methods and available experimental data.

• Advances in aircraft and spacecraft science
• /
• 제2권4호
• /
• pp.427-443
• /
• 2015

The present paper is the follow-on of a former work in which the influence of the gas-surface interaction models was evaluated on the aerodynamic coefficients of an aero-space-plane and on a section of its wing. The models by Maxwell and by Cercignani-Lampis-Lord were compared by means of Direct Simulation Monte Carlo (DSMC) codes. In that paper the diffusive, fully accommodated, semi-specular and specular accommodation coefficients were considered. The results pointed out that the influence of the interaction models, considering the above mentioned accommodation coefficients, is pretty strong while the Cercignani-Lampis-Lord and the Maxwell models are practically equivalent. In the present paper, the comparison of the same models is carried out considering the dependence of the accommodation coefficients on the angle of incidence (or partial accommodation coefficients). More specifically, the normal and the tangential momentum partial accommodation coefficients, obtained experimentally by Knetchel and Pitts, have been implemented. Computer tests on a NACA-0012 airfoil have been carried out by the DSMC code DS2V-64 bits. The airfoil, of 2 m chord, has been tested both in clean and flapped configurations. The simulated conditions were those at an altitude of 100 km where the airfoil is in transitional regime. The results confirmed that the two interaction models are practically equivalent and verified that the use of the Knetchel and Pitts coefficients involves results very close to those computed considering a diffusive, fully accommodated interaction both in clean and flapped configurations.

• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.1-11
• /
• 2002

본 연구에서는 특별히 PC cluster와 같은 병렬 환경에서 효율적인 계산을 수행할 수 있는 격자중심에 기초한 직접모사 기법을 개발하였다. 병렬환경 하에서의 효과적인 계산 수행을 위해서는 전체 계산 영역을 격자수와 각 격자에 할당되는 모사 입자 수를 고려한 부 영역들로 나누어주었다. 또한, 격자 사용의 효율성 증대를 위해서는 매우 성긴 격자에서부터 출발하여 점차적인 격자 적응을 수행하였다. 본 방법은 2차원의 초음속 평판 문제와 축대칭의 Rothe, 노즐 문제에 적용하였다. 그 결과로부터 본 방법을 사용하면 기존의 입자 중심 기법에 비해 매우 효율적으로 희박기체 유동을 해석할 수 있음을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.597-602
• /
• 2000

In a MEMS(micro-electro mechanical system), the fluid may slip near the surface of a solid and have a discontinuous temperature profile. A numerical prediction in this slip flow region can provide a reasonable guide for the design and fabrication of micro devices. The compressible Navier-Stokes equation with Maxwell/smoluchowski boundary condition is solved for two simple systems; couette flow and pressure driven flow in a long channel. We found that the couette flow could be regarded as an incompressible system in low speed regions. For the pressure driven flow system, we observed nonlinear distribution of pressure in the long channel and numerical results showed a good agreement with the experimental results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.643-648
• /
• 2001

The direct simulation Monte Carlo(DSMC) method is applied to investigate steady and unsteady flow fields of a single-stage disk-type drag pump. Two different kinds of pumps are considered: the first one is a rotor-rotor combination, and the second one is a rotor-stator combination. The pumping channels are cut on a rotor and stator. The rotor and stator have 10 Archimedes' spiral blades, respectively. In the present DSMC method, the variable hard sphere model is used as a molecular model, and the no time counter method is employed as a collision sampling technique. For simulation of diatomic gas flows, the Borgnakke-Larsen phenomenological model is adopted to redistribute the translational and internal energies. The DSMC results are in good agreement with the experimental data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.111-115
• /
• 2001

The study of nonlinear gas transport in rarefied condition or associated with the microscale length of the geometry has emerged as an interesting topic in recent years. Along with the DSMC method, several fluid dynamic models that come under the general category of the moment method or the Chapman-Enskog method have been used for this type of problem. In the present study, on the basis of Eu's generalized hydrodynamics, a computational model for diatomic gases is proposed. The preliminary result indicates that the bulk viscosity plays a considerable role in fundamental flow problems such as the shock structure and shear flow. The general properties of the constitutive equations are obtained through a simple mathematical analysis. With an iterative computational algorithm of the constitutive equations, numerical solutions for the multi-dimensional problem can be obtained.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.12-19
• /
• 2004

미소평판 주위의 저속 기체유동장이 기체분자운동론에 근거한 방법으로 조사되었다. 모델충돌적분항으로 단순화된 볼츠만방정식을 Discrete Ordinate 방법과 결합된 유한차분법으로 수치해석 하여 길이가 $20{\mu}m$인 5% 평판 주위의 유동장을 계산하였다. 계산결과가 Information Preservation 방법 및 미끄럼 경계조건을 이용한 연속체 방법에 의한 결과와 비교되었다. 세 가지 서로 다른 방법에 의한 계산결과가 기본적으로 유사한 유동형태를 예측하였으나, 세부적인 변에서는 본 방법의 결과가 다른 두 방법의 결과보다 더 정확함을 보였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.126-131
• /
• 2004

The interaction between the hypersonic free stream and the side jet flow at high altitudes is investigated by direct simulation Monte Carlo(DSMC) method. Since there is a great difference in density between the free stream and the side jet flow, the weighting factor technique which could control the number of simulation particles, is applied to calculate these two flows simultaneously. Chemical reactions are not considered in the calculation. For validation, the corner flow passing between a pair of plates that are perpendicularly attached is solved. The side jet flow is then injected into this comer flow and solution is found for the merged flow. Results are compared with the experiments. For a more realistic rocket model, the flow past a blunted cone cylinder shape is solved. The leeward or windward jet injection is merged with this flow. The effect on the rocket surface is observed at various flow angles. The lambda effect and the wake structure are found like low attitudes. High interaction between the free stream and the side jet flow is observed when the side jet is injected in the windward direction.