• Microbiology and Biotechnology Letters
• /
• v.50 no.4
• /
• pp.584-591
• /
• 2022

Identifying carbapenem-resistant Enterobacteriaceae (CRE) is necessary to prevent nosocomial CRE infection outbreaks. Here, a rapid identification method with reduced enrichment time was developed without compromising accuracy. A total of 49 rectal swabs requested for CRE screening at the Department of Diagnostic Medicine at Hospital B in Busan, Korea, were included in this study. Specimens were inoculated on MacConkey and CHROMID Carba media either directly or following enrichment for 3, 6, and 24 h in 100 μl trypticase soy broth containing an ertapenem disk. The enriched cultures were further inoculated on CHROMID Carba or MacConkey media containing an ertapenem disk. In total, 19 CRE and 5 carbapenem-intermediate Enterobacteriaceae isolates were obtained from the 49 swabs. Among the 19 CRE isolates, carbapenemase-producing Enterobacteriaceae constituted 13 strains. Moreover, of the 19 CRE isolates, 16 (81.25%) and 17 (88.24%) were identified from the direct cultures on MacConkey and CHROMID Carba media, respectively. After 3 h of enrichment, the proportions of the CRE identified in the media were: MacConkey medium, 16/19 (81.25%); CHROMID Carba medium, 17/19 (88.24%); and MacConkey medium containing an ertapenem disk, 17/19 (88.24%). The detection rates after 6 h of enrichment were the same for all three media (19/19 strains, 100%), whereas those after 24 h of enrichment were 21, 22, and 24 strains, respectively, but included false positives. These findings suggest that a 6-h enrichment before inoculation on the CHROMID Carba medium is optimal for the rapid and accurate detection of CRE in clinical samples.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.883-889
• /
• 2009

The importance of cost estimate in early stage such has been increasing due to market change and severe competition in construction industry. Because the adjustable budget is only 20% after design stage, most of the crucial decisions to influence cost is made in the early stage. However, in the early stage, the project scope is not defined completely so that estimator has inaccurate information to make critical decision. Therefore, this research suggests the cost estimate method using case-based reasoning. Case-based reasoning is appropriate for the early cost estimating, as it has the strength of rapidity and convenience in cost estimation. This research analyzes 84 actual data of public apartment on the scale of 11~15 stories. In order to extract the most similar case, at the first step this research identifies influence factors and calculates attribute similarity. In case-based reasoning, the most challenging task is determining attribute weight. At the third step, this research calculates case similarity which is aggregated attribute similarity multipled by attribute weight. Finally, extracts the most similar case which has the highest score of case similarity.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.3
• /
• pp.267-273
• /
• 2023

As the impacts of global climate change become increasingly apparent, the reduction of carbon emissions has emerged as a critical subject of discussion. Nuclear power has garnered attention as a potential carbon-free energy source; however, the rapidity of load following in nuclear power generation poses challenges in comparison to fossil-fueled methods. Consequently, power-to-gas systems, which integrate nuclear power and hydrogen, have attracted growing interest. This study presents a preliminary design of a very high temperature reactor (VHTR) integrated blue hydrogen production process utilizing DWSIM, an open-source process simulator. The blue hydrogen production process is estimated to supply the necessary calorific value for carbon capture through tail gas combustion heat. Moreover, a thermodynamic assessment of the main recuperator is performed as a function of the helium flow rate from the VHTR system to the blue hydrogen production system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.293-293
• /
• 2022

가뭄은 시간적 지속성이 타 재난에 비해 길고 공간적 피해의 범위와 편차가 크다는 점에서 지역적 특성과 가뭄대응역량에 맞는 적절한 대응과 대책 마련이 필수적이다. 본 연구에서는 선행연구에서 제시된 바 있는 지역적 가뭄복원력평가 방법론을 기준으로, 가뭄복원력 평가 인자의 민감도 분석을 실시하였다. 가뭄복원력평가 인자는 4Rs (Robustness, Redundancy, Resourcefulness, Rapidity)을 기준으로 총 18개의 지표로 구성되어 있으며, 18개 지표를 산출하는 과정에서 활용되는 세부자료는 정량자료 19개와 담당자 설문조사를 통해 산정되는 정성자료 8개를 포함하여 총 28개가 존재한다. 본 연구에서는 국내 지자체의 복원력 평가 결과 기준, 등급별 1-2개 지자체를 민감도 분석의 대상으로 설정하고, 19개 정량자료 각각의 비율적 변화에 따른 복원력 결과의 변동성을 정량화하여 도출하였다. 또한 19개 정량자료 중, 연관성 및 계층적 관계성이 존재하는 주요 자료 그룹을 구분하고, 대상 자료의 동시적, 연쇄적 변화에 따른 복원력 평가 결과의 영향도를 정성, 정량적으로 평가하였다. 분석 결과 가뭄 복원력에 기여하는 인자의 변화에 따라 가뭄 복원력의 증감 정도가 지자체 별도 상이하게 나타남을 확인할 수 있었다. 도출된 민감도 분석 결과는 지자체의 현재 가뭄대응역량지표를 기준으로, 가뭄 복원력을 증가시키기 위한 효율적 대책 및 계획 수립을 위한 의사결정에 활용될 수 있을 것으로 기대된다.

• The Korean Journal of Pesticide Science
• /
• v.2 no.3
• /
• pp.117-125
• /
• 1998

Flupyrazofos (O,O-diethyl-O-(1-phenyl-3-trifluoromethyl-5-pyrazoyl)thiophosphoric acid ester) is a new organo-phosphorous insecticide. Flupyrazofos has exhibited excellent activity against diamondback moth (Plutella xylostella, DBM), and it is highly activity against rice armyworm(Pseudaleta separata) and cotton caterpillar(Palpita indicae). Flupyrazofos has then revealed outstanding both rapidity and residual action for DBM, although no systemic actions were observed and no cross-resistances were found to the resistance strains (Op-R, Py-R, IGR-R). Also, susceptibilities of five local strains to flupyrazofos were similar to those of the susceptible strain. These results indicate that flupyrazofos has considerable potential for controlling diamondback moth, rice armyworm and cotton caterpillar in field.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1753-1758
• /
• 2012

A novel, efficient and controlled protocol for the synthesis and enhanced photocatalytic activity of $Au@TiO_2$ nanocomposite is developed. $TiO_2$ (P25) was pretreated by employing UV light (${\lambda}$ = 254 nm) and the pretreated $TiO_2$ was uniformly decorated by gold nanoparticles (AuNPs) in presence of sodium citrate and UV light. UV pretreatment makes the $TiO_2$ activated, as electrons were accumulated within the $TiO_2$ in the conduction band. These accumulated electrons facilitate the formation of AuNPs which were of very small size (2-5 nm), similar morphology and uniformly deposited at $TiO_2$ surface. It leads to formation of stable and crystalline $Au@TiO_2$ nanocomposites. The rapidity (13 hours), monodispersity, smaller nanocomposites and easy separation make this protocol highly significant in the area of nanocomposites syntheses. As-synthesized nanocomposites were characterized by TEM, HRTEM, TEM-EDX, SAED, XRD, UV-visible spectrophotometer and zeta potential. Dye degradation experiments of methyl orange show that type I ($Au@TiO_2$ nanocomposites in which $TiO_2$ was pretreated with UV light) has enhanced photocatalytic activity in comparison to type II ($Au@TiO_2$ nanocomposites in which $TiO_2$ was not pretreated with UV light) and $TiO_2$ (P25). This shows that pretreatment of $TiO_2$ provides type I a better catalytic activity.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.1
• /
• pp.22-26
• /
• 2005

Total homocysteine is now considered a risk factor for cardiovascular diseases. I increased interest has led to a multitude of studies requiring the determination of total homocysteine in conjunction with other factor. There are various methods for measuring total homocysteine, including HPLC, FPIA, GC-MS and LC-MS/MS. The most recent method for measuring total homocysteine uses a deuterium-labelled internal standard and tandem mass spectrometry. This development requires no derivatization and therefore leads to an increase in sample throughput compared to other techniques. We have evaluated the method for homocysteine by the LC-MS/MS method, and the correlation between the FPIA method and the LC-MS/MS method. The standard curve (0, 5, 10, 20, 50, 100 uM) was linear over the range examined (up to 100 uM). The lower limit of quantification (CV < 10 %) was 0.5 uM/L and the lower limit of detection (S/N >3) was 0.1 uM/L. Intra-assay variation and inter-assay variation were both <6 %. The comparision study for homocysteine concentration showed good correlation (r=0.9684) between the FPIA method and LC-MS/MS methods. Our conclusion is that the method showed relatively good precision, and was rapid and accurate.

• Korean Journal of Veterinary Research
• /
• v.37 no.2
• /
• pp.349-358
• /
• 1997

Mycobacterium paratuberculosis is the etiologic agent of Johne's disease, a chronic inflammatory bowel syndrome in ruminants. The attempts to control or eradicate the disease were severely hampered by the inadequacies of present diagnostic methods. The first purpose of this study was to detect Johne's disease out of 577 cows in the province of Kyunggi, Chungchong, Gangweon and the second purpose was to compare the results of non-absorbed ELISA, absorbed ELISA, PCR, and conventional culture methods. The third purpose was to increase diagnostic specificity, accuracy and rapidity. When non-absorbed ELISA test was conducted with Mycobacterium paratuberculosis antigen, the prevalence of positive was 10.9%. To increase diagnostic specificity, absorbed ELISA test with Mycobacterium phlei was used. In this test, the positive prevalence was 1.7%. For the specific detection of Mycobacterium paratuberculosis, PCR was applied to bacterial culture obtained from fecal samples of cattle. The DNA sequences derived from IS900 were used to prepare DNA primers for detection and identification of Mycobacterium paratuberculosis by PCR. PCR for M paratuberculosis isolated from fecal cultures amplified specific target DNA. PCR was much more rapid than that obtained by conventional culture technique in diagnosis of Johne's disease.

• Journal of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.162-167
• /
• 1987

Four component $Ag_2S$-PbS-$PbHAsO_4-Cu_2S$ and three component $Ag_2S$-PbS-$PbHAsO_4$ electrodes have been prepared and evaluated for the direct measurement of monohydrogen arsenate. The 3.0 : 0.5 : 1.0 : 0.25 (mole ratio, $Ag_2S$:PbS:$PbHAsO_4:Cu_2S$) composition is superior in terms of potentiometric response, stability, rapidity of response and reproducibility. Testing was done over the concentration range $10^{-1}$~$10^{-4}M\;HA_SO_4^{2-}$in 0.1F NH4Ac-NH4OH buffer solution at pH 8.50 with constant ionic strength. Interfering ions were $CN^-,\;I^-,\;S^{-2}$ and $Cl^-$.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.490-500
• /
• 2017

Fuel cell (FC) is a promising power supply in electric vehicles (EV); however, it has poor dynamic performance and short service life. To address these shortcomings, a super capacitor (SC) is adopted as an auxiliary power supply. In this study, the frequency decoupling control method is used in electric vehicle energy system. High-frequency and low-frequency demand power is provided by SC and FC, respectively, which makes full use of two power supplies. Simultaneously, the energy system still has rapidity and reliability. The distributed power system (DPS) of EV requires DC-DC converters to achieve the desired voltage. The stability of cascaded converters must be assessed. Impedance-based methods are effective in the stability analysis of DPS. In this study, closed-loop impedances of interleaved half-bridge DC-DC converter and phase-shifted full-bridge DC-DC converter based on the frequency decoupling control method are derived. The closed-loop impedance of an inverter for permanent magnet synchronous motor based on space vector modulation control method is also derived. An improved Middlebrook criterion is used to assess and adjust the stability of the energy system. A theoretical analysis and simulation test are provided to demonstrate the feasibility of the energy management system and the control method.