• Geomechanics and Engineering
• /
• 재33권6호
• /
• pp.597-609
• /
• 2023

The instability and failure of engineered rock masses are influenced by crack initiation and propagation. Uniaxial compression and acoustic emission (AE) experiments were conducted on cracked sandstone. The effect of the crack's dip on the crack initiation was investigated using fracture mechanics. The crack propagation was investigated based on stress-strain curves, AE multi-parameter characteristics, and failure modes. The results show that the crack initiation occurs at the tip of the pre-fabricated crack, and the crack initiation angle increases from 0° to 70° as the dip angle increases from 0° to 90°. The fracture strength k_cr is derived varies in a U-shaped pattern as β increased, and the superior crack angle β_m is between 36.2 and 36.6 and is influenced by the properties of the rock and the crack surface. Low-strength, large-scale tensile cracks form during the crack initiation in the cracked sandstone, corresponding to the start of the AE energy, the first decrease in the b-value, and a low r-value. When macroscopic surface cracks form in the cracked sandstone, high-strength, large-scale shear cracks form, resulting in a rapid increase in the AE energy, a second decrease in the b-value and an abrupt increase in the r-value. This research has significant theoretical implications for rock failure mechanisms and establishment of damage indicators in underground engineering.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.893-899
• /
• 2024

In a secondary cooling system of a sodium-cooled fast reactor (SFR), rapid detection of hydrogen due to sodium-water reaction (SWR) caused by water leakage from a heat exchanger tube of a steam generator (SG) is important in terms of safety and property protection of the SFR. For hydrogen detection, the hydrogen detectors using atomic transmission phenomenon of hydrogen within Ni-membrane were used in Japanese proto-type SFR "Monju". However, during the plant operation, detection signals of water leakage were observed even in the situation without SWR concerning temperature up and down in the cooling system. For this reason, the study of a new hydrogen detector has been carried out to improve stability, accuracy and reliability. In this research, the authors focus on the difference in composition of hydrogen and the difference between the background hydrogen under normal plant operation and the one generated by SWR and theoretically estimate the hydrogen behavior in liquid sodium by using ultra-accelerated quantum chemical molecular dynamics (UA-QCMD). Based on the estimation, dissolved H or NaH, rather than molecular hydrogen (H₂), is the predominant form of the background hydrogen in liquid sodium in terms of energetical stability. On the other hand, it was found that hydrogen molecules produced by the sodium-water reaction can exist stably as a form of a fine bubble concerning some confinement mechanism such as a NaH layer on their surface. At the same time, we observed experimentally that the fine H₂ bubbles exist stably in the liquid sodium, longer than previously expected. This paper describes the comparison between the theoretical estimation and experimental results based on hydrogen form in sodium in the development of the new hydrogen detector in Japan.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권3호
• /
• pp.165-173
• /
• 2015

본 논문에서는 PRT(Personal Rapid Transit) 차량의 수직이송을 위한 장치를 개발하는 과정에서 수행된 주요 구조물의 정적 구조적 안전성 평가 결과를 다룬다. 지금까지 노선상에서 승객이 탑승한 상태에서 운영중인 차량의 수직이송에 대한 연구는 전무하며, 이는 기존의 2 차원 적인 교통운영 체계의 한계를 극복하는데 기여할 수 있을 것으로 기대된다. 특히, 본 연구에서 제안된 수직이송장치는 순환컨베이어 방식으로 연속 이송이 가능해서 통행량이 많은 지역에도 적용이 가능하다. 본 시스템이 물류분야에서 많이 사용되어 왔지만, 수직이동 시 차량의 무게에 의한 하중은 일반적인 물류의 수송과는 다르게 집중하중 형태로 컨베이어에 가해지기 때문에 이에 대한 구조적 안정성 평가는 필수적이다. 본 논문에서는 상용 유한요소 해석 프로그램인 $Ansys^{(R)}$를 이용해서 수직이송 장치의 기본 설계(안)의 구조적 안정성을 수치해석적 방법에 의해 평가하고자 한다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.323-325
• /
• 2002

Bacillus Anthracis is the causative agent of anthrax. The major virulence factors are a poly-D glutamic acid capsule and three-protein component exotoxin, which is collectively known as anthrax toxin, protective antigen (PA, 83 kDa), lethal factor (LF, 90 kDa), and edema factor (EF, 89 kDa). These three proteins individually have no known toxic activities, but in combination with PA form two toxins (lethal toxin and edema toxin), causing different pathogenic responses in animals and cultured cells. However, it remains to be elucidated for pathogenic mechanism of anthrax toxin. In this study, we constructed toxin component in bacterial overexpression system and purified the native toxin from Bacillus anthracis delta sterne F32 using FPLC system. Recombinant toxin showed high homogeneity and rapid purification processes. Also, this recombinant toxin was comparable to B. anthracis native toxin in terms of cytotoxic effects on cultured cell lines.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.425-431
• /
• 2000

Cobalt ferrite thin films on Corming glass substrate were fabricated by a sol-gel method. Cobalt ferrite thin films with the grain size of 20-35 nm and thickness of 50nm were obtained. Rapid thermal annealing (RTA) and Annealing processes were adopted for comparison of characteristics of the films. Coercivity values were changed with thermal condition and magnetization values were increased as a function of soaking time. With prolonged soaking time, however, it was decreased because of the diffusion of cations from the glass substrate. The RTA process in preparation of cobalt ferrite thin film was the effective way to prevent and to form a single spinel phase in reduced soaking time. The film heated at 600$^{\circ}C$ for 30 minutes by RTA had coercivity of 2,600 Oe, saturation magnetization 460 emu/㎤, and Mr$.$$\delta$ of 1.43 memu/$\textrm{cm}^2$.

• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2003년도 추계학술발표대회 논문요약집
• /
• pp.39-39
• /
• 2003

Antioxidant enzyme genes play a key role in cell defense against the lethal effects of oxidative stresses in animals and have an essential function which has allowed the evolution of aerobic respiration starting from an ancient form of oxygen-insensitive life. Piscine antioxidant enzymes are also involved in the rapid response to various toxic chemicals as well as many biological stresses, indicating that they could be used as biomarkers for health and aquatic environment. With the purpose for developing fine molecular probing tool to assess the stresses in marine fish, we identified three major antioxidant enzyme genes (superoxide dismutase, catalase and glutathione-S-transferase) from Korean rock bream using expressed sequence tag analysis and/or high density filter screening. Here we report the molecular information on these gene transcripts including complete sequence data and expression profiles.

• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.3963-3966
• /
• 2011

A series of pyranopyrazoles, was efficiently synthesized via one-pot, four component reaction of ethyl acetoacetate, hydrazine hydrate, aldehydes and malononitrile in the presence of catalytic amount silicotungstic acid under solvent free condition. NOE experiments confirmed that the product exist exclusively in the 2H form. The present protocol offers the advantages of clean reaction, short reaction time, high yield, easy purification and economic availability of the catalyst.

• 전자공학회논문지B
• /
• 제33B권6호
• /
• pp.64-72
• /
• 1996

In this paper, we propose predictive motion estimatin algorithm which can predict motion without additional side information considering spatio-tempral correlatio of motion vector. This method performs motion prediction of current block using correlation of the motion vector for two spatially adjacent blocks and a temporally adjacent block. Form predicted motion, the position of searhc area is determined. Then in this searhc area, we estimate motion vector of current block using block matching algoirthm. Considering spatial an temporal correlation of motion vector, the proposed method can predict motion precisely much more. Especially when the motion of objects is rapid, this method can estimate motion more precisely without reducing block size or increasing search area. Futhrmore, the proposed method has computation time the same as conventional block matching algorithm. And as it predicts motion from adjacent blocks, it does not require additional side information for adjacent block. Computer simulation results show that motion estimation of proposed method is more precise than that of conventioanl method.

• Architectural research
• /
• 제13권2호
• /
• pp.13-21
• /
• 2011

Since 2002, Architecture Schools in Korea was changing long traditional architectural education system from 4 years generalized architectural engineering curriculum to 5 years professional architecture program. Until 2010, 76 architecture schools have changed their program to 5 years course which was focused to design studio education. It was a very rapid change and there was not much time develop their own system which could represent institutional identity, character of students and local environment. Korea joined as a regular member of Canberra Accord in 2010 and it is meaningful to compare Korean architecture program contents to another country education contents. US architecture programs were selected for this comparison study. The goals of this study are to create a comparable understanding the form of contents of Architectural Education in US and Korea and to verify the substantial equivalence of these systems. To achieve above goals, three public institutes of each country were selected and analyzed with general information, history, resources, curriculum and the matrix of Student Performance Criteria for quantitative comparison. For qualitative comparison education context of programs were analyzed with program missions, the way of advising, professional connection and distribution of faculty loads.

• KDI Journal of Economic Policy
• /
• 제39권4호
• /
• pp.1-23
• /
• 2017

I measure aggregate productivity growth in manufacturing between 1995 and 2013 as defined by Petrin and Levinsohn (2012). I decompose aggregate productivity growth into technical efficiency improvements, resource reallocations, and net entry effects. I find that aggregate productivity growth slows down after 2004 and that the rapid drop in technical efficiency growth contributed most to the decline. In this paper, I focus on the role of young plants with regard to productivity growth of Korean manufacturing. I show that young plants account for nearly half of APG (48%), while their value-added share is 14 percent on average between 1995 and 2013. I find that productivity growth at young plants has been declining for the last ten years. The lower growth of continuing young plants contributes to this trend. These results stress the important role of young plants in aggregate productivity growth and imply that understanding the dynamics of young plants is necessary to form effective start-up policies.