• 한국재료학회지
• /
• 제2권1호
• /
• pp.27-34
• /
• 1992

Tantalum silicide films are prepared from a composite $TaSi_{28}$ target source and subjected to rapid thermal annealing($500-1100^{\circ}C$, 20sec) in Ar ambient. The formation and the properties of tantalum silicides have been investigated by using 4-point probe, x-ray diffraction, scanning electron microscope(SEM), Auger electron spectroscope(AES), and ${\alpha}$-step. It has been found that the sample annealed above $700^{\circ}C$ forms a polycrystalline $TaSi_2$ phase, and grains grow in granular form regardless of the kind of substrates. The mechanism of the formation of tantalum silicide is the nucleation and growth by Ta-Si short range reaction. The tantalum silicide film has the relatively low resistivity($70-72.5{\mu}{\Omega}-cm$) and smooth surface roughness.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.64-70
• /
• 2001

In all the Rapid Prototyping (RP) techniques, the computer-aided design (CAD) model of a three-dimensional part is sliced into horizontal layers of uniform, but not necessarily constant, thickness in the building direction. Each cross- sectional layer is successively deposited and, at the same time, bonded onto the previous layer. The stacked layers form a physical part of the model. The objective of this study is to develop a software for automatic generation of unit shape part(USP) for a new RP process, Variable Lamination Manufacturing using the linear hotwire cutting technique and expandable polystyrene foam sheet as part material(VLM-S). In order to examine the applicability of the developed software to VLM-S, USPs of general three-dimensional shapes, such as an auto-shift lever knob and a pyramid shape were generated.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.386-391
• /
• 1999

The charge-discharge, the high-rate dischargeability, and the self discharge characteristics of the electrodes composed of rapidly solidified ZrV\ulcornerMn\ulcornerMo\ulcornerNi\ulcorneralloy, which has the form of partial substitution of Mn, Mo, Ni for V in $ZrV_2$ were studied. The alloys were prepared using Arc & RSP(Rapid Solidification Process) at the rotating roller speed of 2000 and 5000 rpm. Some of them were received heat treatment at$ 560 ^{\circ}C$ for 1 hour after the solidification to investigate the effect of the heat treatment. It was fond that cycle life was significantly improved by RSP, whereas discharge capacity, activation rte and high rate dischargeability were decreased compared with the conventional arc melting method. The capacity loss seems to be due to the loss of the crystallinity and the increase of the cycle life ascribed to the presence of the amporphous phase as well as the refined grain size of less than 0.2$\mu\textrm{m}$. Heat treatment of the alloy cooled at 2000 rpm improved the cycle life. In case of the alloys cooled at 5000 rpm, both the discharge capacity and the activation rate were significantly improved by the heat treatment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.49-50
• /
• 2005

Nitrogen and phosphorus ions were implanted into ZnO thin film fabricated by pulsed laser deposition. ion implanted ZnO thin films were annealed from $700^{\circ}C$ to $1000^{\circ}C$ using rapid thermal annealing process. The electron concentration was changed form $10^{20}$ to $10^{18}/cm^3$. Effect of nitrogen and phosphorus in ZnO thin films was certified and the structural and optical properties of nitrogen and phosphorus doped ZnO thin films depending on concentration of nitrogen and phosphorus were investigated.

• Biomolecules & Therapeutics
• /
• 제19권1호
• /
• pp.90-96
• /
• 2011

Automated HPLC/SPE/HPLC coupling experiments using the Sepbox system allowed the rapid identification of four bioactive principles reducing the production of amyloid $\beta$-peptide ($A{\beta}$) from two South African plants, Euclea crispa subsp. crispa and Crinum macowanii. The structures of biologically active compounds isolated from the methanol extract of Euclea crispa subsp. crispa were assigned as 3-oxo-oleanolic acid (1) and natalenone (2) based on their NMR and MS data, while lycorine (3) and hamayne (4) were isolated from the dichloromethane-methanol (1:1) extract of Crinum macowanii. These compounds were shown to inhibit the production of $A{\beta}$ from HeLa cells stably expressing Swedish mutant form of amyloid precursor protein (APPsw).

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.56.2-56.2
• /
• 2012

Clinically-favored materials for bone regeneration are mainly based on bioceramics due to their chemical similarity to the mineral phase of bone. A successful scaffold in bone regeneration should have a 3D interconnected pore structure with the proper biodegradability, biocompatibility, bioactivity, and mechanical property. The pore architecture and mechanical properties mainly dependent on the fabrication process. Bioceramics scaffolds are fabricated by polymer sponge method, freeze drying, and melt molding process in general. However, these typical processes have some shortcomings in both the structure and interconnectivity of pores and in controlling the mechanical stability. To overcome this limitation, the rapid prototyping (RP) technique have newly proposed. Researchers have suggested RP system in fabricating bioceramics scaffolds for bone tissue regeneration using selective laser sintering, powder printing with an organic binder to form green bodies prior to sintering. Meanwhile, sintering process in high temperature leads to bad cost performance, unexpected crystallization, unstable mechanical property, and low bio-functional performance. The development of RP process without high thermal treatment is especially important to enhance biofunctional performance of scaffold. The purpose of this study is development of new process to fabricate ceramic scaffold at room temperature. The structural properties of the scaffolds were analyzed by XRD, FE-SEM and TEM studies. The biological performance of the scaffolds was also evaluated by monitoring the cellular activity.

• 한국산학기술학회논문지
• /
• 제3권2호
• /
• pp.126-130
• /
• 2002

본 논문은 쾌속제작법을 이용한 임의형상을 가공하는 새로운 방법의 개념을 소개하고 있다. 본 시스템은 레이저 절단, 이송. 적층, 소결의 단계를 통하여 세라믹재료로 된 임의형상을 가공할 수 있다. 시스템을 구성하는 주요장비로는 레이저 발생장치, X-Y테이블, 이송시스템, 그리고 전기로 등이 있다. 이 시스템을 사용하면 표면의 거칠기가 매끄러운 형상을 상대적으로 짧은 시간에 제작할 수 있는 장점이 있다. 또, 2차 공정을 거치지 않고, 바로 물체를 제작할 수 있어 효율성이 높다고 할 수 있다. 제작된 모형은 바로 조립되어 사용될 수 있기 때문에 응용분야가 다양하다.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2305-2314
• /
• 2023

The governing equations of atmospheric dispersion most often taking the form of a second-order partial differential equation (PDE). Currently, typical computational codes for predicting atmospheric dispersion use the Gaussian plume model that is an analytic solution. A Gaussian model is simple and enables rapid simulations, but it can be difficult to apply to situations with complex model parameters. Recently, a method of solving PDEs using artificial neural networks called physics-informed neural network (PINN) has been proposed. The PINN assumes the latent (hidden) solution of a PDE as an arbitrary neural network model and approximates the solution by optimizing the model. Unlike a Gaussian model, the PINN is intuitive in that it does not require special assumptions and uses the original equation without modifications. In this paper, we describe an approach to atmospheric dispersion modeling using the PINN and show its applicability through simple case studies. The results are compared with analytic and fundamental numerical methods to assess the accuracy and other features. The proposed PINN approximates the solution with reasonable accuracy. Considering that its procedure is divided into training and prediction steps, the PINN also offers the advantage of rapid simulations once the training is over.

• Membrane and Water Treatment
• /
• 제14권4호
• /
• pp.181-189
• /
• 2023

The Covid-19 pandemic has increased demand for chlorine-based sanitizing solutions, most of which contain hypochlorous acid (HOCl) as an active agent. Free chlorine (HOCl) in these sanitizers is crucial for their efficacy. Disposable test strips are affordable and convenient tools for determining various qualitative and quantitative parameters. In this study, disposable opto-chemical test strips were developed by physically immobilizing 3,3',5,5'-tetramethylbenzidine (TMB) and o-dianisidine (o-D) reagents on chromatography and filter paper-based test strips for the visualization and detection of free chlorine in the form of HOCl. The reagents undergo a rapid color change upon reaction with chlorine through a redox reaction. The paper-based test strips showed rapid color change within a minute and a low sample volume requirement (1 ml). This portable, disposable paper-based test strip is a simple and cost-effective way to rapidly detect the presence of HOCl sanitizers for home and field applications. Both TMB and o-D successfully detected chlorine. Chromatography paper proved to be the more efficient option among the two papers used as substrates for the reagents (TMB and o-D). It exhibited high retention capacity and high performance in terms of color transformation when reacting with HOCl, even after two months of storage.

• 콘크리트학회논문집
• /
• 제29권2호
• /
• pp.159-167
• /
• 2017

프리캐스트 바닥판은 공기단축 및 고품질 확보라는 장점으로 인해 급속시공이 요구되는 현장에서 현장타설 바닥판의 효과적인 대안으로 평가받고 있다. 그러나 프리캐스트 바닥판 공법은 바닥판간 이음부가 존재하며, 이음부의 연결성능에 따라 전체 교량 구조물의 성능이 좌우되므로 이음부의 연결성능 확보가 중요한 요소이다. 본 연구에서는 기존의 프리캐스트 바닥판 연결시스템을 개선한 비대칭 구조의 요철형 이음단면을 갖는 연결형식을 제안하였으며, 요철의 격벽길이에 따른 구조실험을 수행하여 제안된 연결형식의 휨성능을 평가하였다. 실험결과, 본 연구에서 제안된 연결형식은 격벽 부분에서의 철근의 정착 및 부착파괴 방지가 가장 중요한 요소인 것으로 나타났으며, 이음부 단면 요철의 격벽길이를 짧게 하는 것이 일체형 구조로서의 효과를 발휘하는 데에 보다 유리한 것으로 나타났다. 요철의 격벽길이 증가에 따라 구조성능이 다소 감소되는 것으로 나타났으나 격벽의 길이와 관계없이 제안된 연결형식은 충분한 휨 저항성능을 확보하고 있으며, 프리캐스트 바닥판 이음부에 효과적으로 적용 가능할 것으로 판단된다.