• 한국수산과학회지
• /
• 제3권2호
• /
• pp.120-128
• /
• 1970

In this study, changes in chlorophyll and carotenoid pigment in fresh and ash treated Undaria pinnetifida were determined by column chromatography. And pigment stabilizing effects of ashes were discussed. The results obtained are summarized as follows: 1. The main carotenoids of Undaria pinnetifida are fucoxanthin, violaxanthin, lutein and $\beta-carotene$. 2. In storage of fresh Undaria pinnetifida at $2-5^{\circ}C$ for 30 days, chlorophyll a decreased rapidly and mainly converted to pheophytin a. Among carotenoids, lutein was markedly lost while the others retained approximately $30\%$ after 30 days' storage. 3, By treating the sample with ashes, the loss of chlorophyll a was restrained whereas that of carotenoids seemed to be promoted. It is considered that pigment stabilization was attributed to both effect, the pH control effect by the alkalinity of ashes and the fixation of the pigment by heavy metals in ashes. The stabilizing effect of chlorophyll a differed from the kind of ashes used. Reed ashes showed better effect than others such as straw or pine ashes. 4. Since fucoxanthin is extremely sensitive to alkali the treatment of ashes with a high alkalinity resulted in rapid decrease of the pigment during storage. 5. In the analysis of ashes, reed ashes which had better effect on chlorophyll a retention than the other ashes showed the highest content of iron.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.966-973
• /
• 2008

In recent, the collapses of cut-slope is gradually increased due to the heavy rains accompanied by typhoon. Specially, many cut-slope failures and landslides was happened to Goheung, Yeosu, Suncheon region, Jeonranamdo in the middle of September 2007. The slope of investigation is width 20 m, height 22 m, and the circular failure was occurred. The parent rocks of the slope are pyroclastic rock, namely andesite, andesitic tuff et al. and the weathering grade is completely weathered to residual soils owing to rapid weathering process and has the existence of fault zone and mafic dyke. Also, lots of extension cracks are presented and the hydrologic condition is very deteriorated. As a result of the limit equilibrium analysis, the safety factor is 1.09(in dry season) and 0.64(in wet season). For the stabilization of the cut-slope, we decided to use the retaining wall, anchors and drainage apparatus.

• 한국정보전자통신기술학회논문지
• /
• 제12권2호
• /
• pp.120-126
• /
• 2019

최근 정밀기계, 전기전자, 반도체 등의 급속한 산업의 발달로 전장장치의 고정밀도 가공의 필요성이 증대하고 있다. 작업자의 감각과 경험에 의존하던 절삭 공작기계 제어는 CNC(Computerized Numeric Controller: 컴퓨터 수치제어) 도입으로 가공 정밀도가 획기적으로 개선되고 있다. 또한 공작 기계의 운전 상태를 실시간 반영하는 가공 동특성(cutting dynamics)기법이 관심을 받고 있다. 본 논문은 CNC 공작기계에 음향센서를 부착하여 공구떨림 감지 및 안정화하는 방안을 제시한다. 공구 이송 위치와 음향센서 데이터를 동기화 하고 수집된 음향 주파수에서 이상 진동음에 대한 주파수를 분석하여 떨림을 감지한다. 또한 가공 동특성 기법을 적용하여 공구떨림 감지와 안정화의 신뢰성을 높인다. 제안한 기법은 금형 가공의 공구떨림 안정화 전후 가공 표면조도의 향상 관점에서 분석 평가한다.

• 한국지반신소재학회논문집
• /
• 제13권4호
• /
• pp.97-107
• /
• 2014

본 논문에서는 표준트럭하중을 받는 연약지반에 놓인 롤타입 강재매트의 모델링과 해석을 수행하였다. 롤 타입 강재매트는 접근성이 제한된 동토지역에서 손쉬운 현장운반을 위해 원형으로 접을 수 있는 강재매트를 의미하며, 동토지반의 융해로 형성되는 연약지반을 통과하는 비포장도로의 급속보강을 위해 개발되었다. 해석 모델은 강재매트 연결부의 비선형적 거동특성을 모사할 수 있는 연결요소, 강재매트의 휨강성을 갖는 쉘요소, 지반특성을 고려한 스프링 구속으로 구성된다. 또한 각 해석요소들의 구조적 거동은 각 모델링 단계에서 실험과 해석을 통해 검증되었다. 링크요소가 없는 빔과 쉘 요소해석이 수행되었으며, 본 연구에서 제시된 해석모델의 결과와 비교하였다. 해석결과, 본 연결부를 고려한 쉘 해석모델의 수직 처짐 결과가 다른 모델에 비하여 상당히 큰 것으로 확인되었다. 따라서, 느슨한 모래지반에 놓인 롤 타입 강재매트의 해석모델은 면밀한 변수해석 연구에 근거하여야 함을 알 수 있다.

• 한국분무공학회지
• /
• 제8권3호
• /
• pp.33-40
• /
• 2003

The low-emission and high-performance diesel combustion is an important issue in the combustion research community, In order to understand the detailed diesel flame involving the complex physical processes, it is quite desirable to diesel spray dynamics, auto-ignition and spray flame propagation. Dynamics of fuel spray is a crucial element for air-fuel mixture formation, flame stabilization and pollutant formation, In the present study, the diesel RCM (Rapid Compression Machine) and the Electric Control injection system have been designed and developed to investigate the effects of injection pressure, injection timing, and intake air temperature on spray dynamics and diesel combustion processes, In terms of the macroscopic spray combustion characteristics, it is observed that the fuel jet atomization and the droplet breakup processes become much faster by increasing the injection pressure and the spray angle, With increasing the cylinder pressure, there is a tendency that the of spray pattern in the downstream region tends to be spherical due to the increase of air density and the corresponding drag force, Effects of intake temperature and injection pressure on auto-ignition is experimently analysed and discussed in detail.

• 한국터널지하공간학회 논문집
• /
• 제8권1호
• /
• pp.65-76
• /
• 2006

기존의 NATM과 같은 터널공법에서는 불착 직후 벽연은 숏크리트나 록볼트에 의하여 지지되기 때문에 재래공법과 비교하여 암반의 느슨함을 감소시킬 수 있으나, 막장은 통상 무지보 상태로 놓여있기 때문에 붕괴의 위험성을 항상 내포하고 있는 것이 현실이다 현재 국내 터널시공시에는 막장이 굴진방향에 직립합A로써 응력의 집중이 발생하며 또한 막장의 안정성을 우려하여 단연분할공법을 채택하는 것이 일반적 공법으로 되어왔다. 그러나 이러한 방법은 경제적우로 큰 부당이 되며 공사기간 연장의 한 원인이 된다. 따라서 곡연막장 굴착공법을 개발하여 적용한다면 보다 나은 응력상태를 유지할 수 있어 1회 불진장의 증대 및 분할공법을 피함으로써 공사비절감 및 공사기간 단측에 매우 유리할 것이라 판단된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.447-452
• /
• 2000

The low-emission and high-performance diesel combustion is an important issue in the combustion research community. In order to understand the detailed diesel flame field involving the complex Physical Processes, It Is quite desirable to study diesel spray dynamics, auto-ignition and spray flame propagation. Dynamics of fuel spray is a crucial element for air-fuel mixture formation flame stabilization and pollutant formation. In the present study, the diesel RCM (Rapid Compression Machine) and the Electric Control injection system have been designed and developed to investigate the effects of injection Pressure, injection timing, and intake air temperature on spray dynamics and diesel combustion processes. In terms of the macroscopic spray combustion characteristics it is observed that the fuel jet atomization and the droplet breakup processes become much faster by increasing the injection pressure and the spray angle. With increasing the cylinder pressure there is a tendency that the shape of spray pattern in the downstream region tends to be spherical due to the increase of air density and the corresponding drag force. Effects of intake temperature and injection pressure on auto-ignition is experimently analysed and discussed in detail.

• 한국연소학회지
• /
• 제6권1호
• /
• pp.1-6
• /
• 2001

To evaluate the effect of lobed structure on pollutant emission, an experimental study examines NOx and CO emissions associated with four burner geometries, such as a conventional circular burner and three lobed ones. Rapid mixing allowed by the lobed burner to produce lean premixed flames, with narrower flame stability diagram than for the conventional circular one. Conventional circular burner of wide and uniform burner rim has an advantage of flame stabilization. Correlation on fuel discharge velocity for flame blowout should be included a variable related to the wall effect of the burner. NOx emission reduces by about 5% at the burner with lobed structure in fuel discharge side compared to conventional circular one. This is due to lower flame temperatures through flame elongation and increased radiative heat losses, caused by partially luminous flame in flame front. Meanwhile, at the burner with lobed structure in air discharge side and both fuel and air discharge sides, NOx emission somewhat increases with reduced radiative heat losses in spite of flame elongation. Therefore, the rapid mixing by lobed structure does not always have an advantage on NOx reduction.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 춘계학술대회
• /
• pp.179-180
• /
• 2015

The variety of organic and inorganic pollutants are introduced to coastal sediment and making highly contaminated due to rapid development of industralization and economic development. Numerous contaminants are release into marine sediment and it significantly affect marine aquatic environment. In the present study stated the optimize the biostimulant ball (BSB) in coastal sedimentand stabilse the heavy metals present in the sediment. The effective variables like BSB size, distance and month variables on Cu stabilization was determined by using Response surface methodology(RSM). The analysis of variance (ANOVA) and coefficient determination (R2) of Cu reduction 0.9610 and maximum stabilisation was obtained in 3cm ball size and 5.5cm distance and 4 month interval time. This result revealed that the BSB in effective for Cu reduction in coastal sediment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.700-705
• /
• 2007

In this study, we observe the application of shape memory alloy(SMA) into smart structures for repeatable actuation, because SMA changes its material properties and characteristics progressively under cyclic loading conditions and finally reaches stable path(state) after a certain number of stress/temperature loading-unloading cycles, so called 'training'. In this paper, SMA wires that have been in a stable state through the training are used. Stress-strain curve of the SMA wire at different temperature levels are measured. In addition, we observe other important effects such as the rate effect according to strain rates for rapid actuation response. The current work presents the experimental test using SMA wire after training completion by mechanical cycling. Through these tests, we measure the characteristics of SMA. With the estimated SMA properties and effects, we compare the experimental results with the simulation results based on the SMA constitutive equations.