• 상하수도학회지
• /
• 제25권3호
• /
• pp.367-373
• /
• 2011

Mechanism of rapid mixing effect on chemical phosphorus removal is evaluated in this study. Assuming that chemical phosphorus removal is unaffected by mixing time, only rapid mixing intensity is evaluated. In order to find out the mechanism, it is hypothesized that rapid mixing affects the Al hydrolysis speciation, and that formation of more monomeric species ($Al^a$) results in better removal of phosphorus. According to a ferron assay, more $Al^a$ formed at higher mixing intensity than at lower intensity. Subsequent experiments revealed that better phosphorus removal was obtained at higher intensity than at lower intensity, in terms of the molar ratio of $Al_{added}/P_{removed}$. The proposed hypothesis was proved in this study. Chemical phosphorus removal is affected by rapid mixing intensity due to its effect on the Al hydrolysis speciation.

• Environmental Engineering Research
• /
• 제17권3호
• /
• pp.151-156
• /
• 2012

This research described the magnetic method for the rapid removal of green algae in water. We modified the pH, cation concentration, and magnetic powder concentration to discover the best removal performance. In order to rapidly remove green algae from water, we added magnetic powder and chitosan into algae water to make a magnetic substance and this was extracted by a strong neodymium magnet. The optimized conditions were pH of 6.5-7.5, chitosan concentration of 10 mg/L, and magnetite powder concentration of less than 0.05%. A higher removing rate was observed when a higher amount of magnetite or chitosan was used, but the total amounts of phosphorus or nitrogen were not decreased.

• Journal of Korean Society for Atmospheric Environment
• /
• 제15권E호
• /
• pp.1-8
• /
• 1999

Catalytic performance for NOx removal by Ga-incorporated silicates(Ga-silicate; Gallosilicate) with MFI type synthesized by the rapid crystallization method was reported in this study. NOx removal was investigated under the condition of O2 excess(10%), with various hydrocarbons of low concentrations. Effect of H2O(2%) addition was also considered. The result showd that the conversion from NOx to N2 was enhanced on the Ga-silicate compared with the Al-silicate. Furthermore, the performance for NOx conversion on the Ga-silicate increased with addition of water.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.559-571
• /
• 2006

The overall objective of this research was to find out the interrelation of coagulant and organic matter during rapid mixing process and to identify the change of organic matter by mixing condition and to evaluate the effect of coagulation pH. During the coagulation, substantial changes in dissolved organics must be occurred by coagulation due to the simultaneous formation of microflocs and NOM precipitates. Increase in the organic removal efficiency should be mainly caused by the removal of microflocs formed during coagulant injection. That is, during the mixing period, substantial amount of dissolved organics were transformed into microflocs due to the simultaneous formation of microflocs and NOM precipitates. The results also showed that 40 to 80% of dissolved organic matter was converted into particulate material after rapid mixing process of coagulation. During the rapid mixing period, for purewater, formation of dissolved Al(III) (monomer and polymer) constant by rapid mixing condition, but for raw water, the species of Al hydrolysis showed different result. During the rapid mixing period, for high coagulant dose, Al-ferron reaction increases rapidly. At A/D(Adsorption and Destabilization) and sweep condition, both $Al(OH)_3(s)$ and dissolved Al(III) (monomer and polymer) exist, concurrent reactions by both mechanism appear to cause simultaneous precipitation.

• 한국치위생학회지
• /
• 제18권3호
• /
• pp.269-280
• /
• 2018

Objectives: The purpose of this study was to investigate the change in the posture of dental hygiene students and clinical dental hygienists when implementing dental scaling before and after posture correction training using the rapid upper limb assessment (RULA) method and 3D motion analysis. Methods: Thirty-two healthy volunteers performed dental scaling to remove artificial calculus on dental manikin. The movement and angle of the joints were verified by RULA and 3D motion analysis during the procedure. The subjects were also photographed for 1 minute during the procedure for 10 minutes while the calculus was removed. After the removal of the calculus, the subject and the instructor checked the video together. Posture correction training was conducted by the instructor so that the subject could perform the calculus removal operation in the correct posture. Artificial calculus of the adjacent teeth was then removed for the same period of time, and the change in posture was reviewed. Results: The total score of the posture change using RULA was $5.72{\pm}0.58$ before training and $4.31{\pm}0.10$ after training, showing a significant decrease after training (p<0.001), and upper arm, lower arm, wrist position, neck and waist position showed significant decrease after training. The three-dimensional motion analysis showed significant differences according to the criteria measured at all measurement sites except the left shoulder (p<0.05) Conclusions: It was confirmed through RULA and 3D motion analysis that postural correction training using calculus removal images was effective, and that correct postural education is essential to preventing musculoskeletal diseases caused by removal of calculus.

• 청정기술
• /
• 제18권4호
• /
• pp.404-409
• /
• 2012

본 연구는 교반강도 및 응집제 주입량의 변화에 따라 플럭의 성장특성이 인의 제거에 미치는 영향을 파악하고자 수행되었다. 본 연구에서는 Al/P 몰비를 1.0, 1.5와 2.0으로 급속혼화강도 G값을 100, 300과 500 $s^{-1}$로 변화시켜 수행하였다. 응집시 발생되는 응집지수(floc size index, FSI)와 크기가 다른 여과지를 이용하여 인의 제거율을 측정하여 성장 특성을 파악하였다. 연구결과 교반강도가 높을수록 용존인의 제거효율이 증가하였으며 Al/P 몰비가 낮을수록 교반강도의 영향이 컸다. T-P의 제거율은 Al/P 몰비 1.0 이하에서는 급속혼화 교반강도가 높을수록 높았으나 Al/P 몰비 1.0 이상에서는 G값 300 $s^{-1}$에서 가장 높은 제거 효율을 나타내었다. Al/P 비 1.0 이하에서는 G값 500 $s^{-1}$에서 가장 큰 FSI값을 나타내었으며, Al/P 몰비 1.0 이상에서는 G값 300 $s^{-1}$에서 가장 큰 FSI값을 나타내었다. 실제하수처리장 유출수를 대상으로 응집에 의한 인 제거에 Al/P 몰비와 급속혼화 강도의 영향은 인공조제수의 결과와 유사하였다.

• 대한환경공학회지
• /
• 제38권3호
• /
• pp.150-153
• /
• 2016

본 연구는 $TiCl_4$의 농도(0.25-0.59 mM)와 급속교반속도(100-250 rpm), 완속교반속도(30-60 rpm)의 변화가 인 제거효율에 미치는 영향을 알아보고자 하였다. 응집제 농도가 $0.25{\leq}[TiCl_4]{\leq}0.39mM$ 범위에서 인 제거 효율은 $TiCl_4$의 농도가 증가 할수록 증가하였으며 처리후 인의 농도는 0.2 mg/L 이하였다. 응집제 농도 0.39 mM, 급속교반속도 100 rpm, 완속교반속도 30 rpm에서 인 제거효율이 약 99%로 가장 높았다. $TiCl_4$의 농도가 낮을 경우(0.25-0.27 mM) 인제거효율의 편차는 급속교반속도 변화(2-3%)보다 완속교반속도 변화(7-10%)에서 더 민감하였다.

• Journal of Plant Biology
• /
• 제37권3호
• /
• pp.357-363
• /
• 1994

An expreiment with non-nodulating alfalfa (Medicago sativa L.) plants was designed to investigate the changes in protein contents and the activities of proteolytic enzymes during a regrowth period of 24 d. Shoot removal caused a depression of root growth and significantly reduced protein contents in roots. An initial decline of root proteins for the first 10 d was followed by a rapid recovery from d 11 to 24. The major increase of regrowing shoot weight occurred also from d 11. The activities of aminopeptidase and endoprotease slightly decreased in regrowing leaves, while protein contents remains stable after shoot removal. Roots exhibited source behaviour with a rapid increase of endoprotease activities for the first 10 d of regrowth; about a 370% increase over the initial level was observed. Increase in endoprotease activity in roots coincided with the time of protein remobilization after shoot removal, indicating the important role of endoproteases in protein degradation.

• 한국수자원학회논문집
• /
• 제30권6호
• /
• pp.731-741
• /
• 1997

동일한 원수에 대하여 탁도제거 지배인자를 변화시켜가며 임펠러 형태별 탁도제거효율을 비교함으로써 관습적으로 설계 운영해오던 혼화과정의 문제점과 정수장의 최적 혼화저건을 만족시킬 수 있는 혼화기의 임펠러 타입 및 체류시간에 대한 운전기준을 제시하고자 하였다. 실험결과 혼화기의 종류는 탁도제거 효율을 물론 정수장의 경제적 운영을 위한 전력비 절감에도 효과가 있는 것으로 판명되었다. 또한 혼화지와 혼화기 설계기준에 일반적으로 활용되어 오던 속도구매 G이외에도 원수의 단위체적당 필요한 혼화에너지를 제시하여 정수효율은 물론 정수장의 경제적 운영효과를 극대화시킬 수 있는 참고자료로 제시하였다.

• 수도
• /
• 제23권6호통권81호
• /
• pp.13-21
• /
• 1996