• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.586-591
• /
• 2005

We deal with the headway which effects on the performance of the PRT(Personal Rapid Transit) system and the system safety. The headway, time between passage of one vehicle and the next, is one of the important factors to assess the line capacity, which has a cue to solve the problem of the congestion in public transportation. To decide the headway there are many important factors, especially such as the failure vehicle deceleration rate, the following simple analytical equation can be made to assess the relation between the line speed and the minimum headway. In this paper we employ a numerical analysis method using a simple analytical equations for the evaluation of the minimum headway and show simple simulation results.

• 대한치과교정학회지
• /
• 제29권3호
• /
• pp.375-381
• /
• 1999

본 연구는 상악궁이 양측성으로 협소하여 구치부 교차 교합을 보이는 환자 30 명에서 정중구개봉합 급속 확장술을 시행한 후, 정모두부방사선 규격 사진을 이용하여 상악골 기저부의 횡적 확장 여부를 확인하고, 그 양을 정량적으로 계측하여 상하악골 횡적 부조화의 개선 정도를 평가하여 다음과 같은 결과를 얻었다. 1. 정중구개봉합 급속 확장술을 시행한 경우 남녀 모두 각각 상악골 기저부의 유의성 있는 증가를 보였다. (P<0.001) 2. 정중구개봉합 급속 확장술을 시행한 후 확장량에 있어서 남녀간 유의성 있는 차이를 보이지 않았다. 3. 정중구개봉합 급속 확장술을 시행한 경우 사춘기 이전과 사춘기 이후 모두 각각 상악골 기저부의 유의성 있는 증가를 보였다. (P<0.001) 4. 정중구개봉합 급속 확장술을 시행한 후 확장량에 있어서 사춘기 이전과 이후 간에 유의성 있는 차이를 보이지 않았다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.3-8
• /
• 2000

A simple and rapid simultaneous analysis method of BTEX and TPH in soil was developed. 5g of soil sample were mixed with sodium sulfate and then extracted with 10 mL of mixture of acetone and dichloromethane (1:1). Extraction was performed for 10 min in sonicator and analysis was with GC-FID. The detection limits of BTEX and TPH was 0.8 and 10 mg/kg, respectively. The analytical recoveries were >90% for all BTEX and TPH. Low boiling point fuels and high boiling point fuels are consistently reproduced within RSD 7%. The analysis results show very simple and rapid quantitation of BTEX and TPH in soil sample with low RSD.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.61-66
• /
• 2023

In this study, we developed a simulation methodology for a technology that rapidly cools molds by directly spraying them with CO₂ in its liquefied gaseous state. Initially, a simulation verification process was conducted using ANSYS Fluent's heat transfer analysis based on temperature values measured in prior research experiments, ensuring a comparable temperature could be calculated. Subsequently, the validated analysis method was employed to evaluate design factors that exert the most significant influence on cooling. An evaluation was conducted based on three factors: part thickness, mold thickness, and the melting temperature of material. Using a full factorial design approach, a total of 27 analyses were completed and subsequently calculated through analysis of means. The impact assessment was carried out based on the temperature values at the product's core. The results indicated that the thickness of the mold had the highest influence, while the melting temperature of material had the least.

• 한국축산식품학회지
• /
• 제21권3호
• /
• pp.256-264
• /
• 2001

Pyrolysis/GC-mass spectrometry(Hewlet-Packard 5890GC/mass selective detector, 5971 BMSD), interfaced to a CDS Pyroprobe 1500 was optimized for rapid analysis of flavour compounds in Cheddar cheese. Twenty flavour compounds, including aldehydes(4), ketones(4), fatty acids(10), alcohol(1), and hydrocarbon(1), were identified from Cheddar cheeses. In total, Twenty-three flavour compounds aldehydes(2), ketones(8), alcohols(3), fatty acids(7), lactone(1), benzene derivative(1) and amide(1) were identified from two samples of accelerated-ripened Cheddar cheese treated with the proteolytic enzymes of Lactobacillus casei LGY. In total, Twenty-one flavour compounds; aldehydes(2), ketones(5), alcohols(2), fatty acids(11), and lactone(1) were identified from enzyme-modified cheese(EMC) treated with the combination of the proteolytic enzymes of Lactobacillus casei LGY and commercial endopeptidase or lipase. However, All the flavour compounds identified by pyrolysis/GC/MS in samples of ARC and EMC were not determined whether they are recognized as typical Cheddar flavour or not. More studies were requested on the development of methods for a rapid and convienent analysis of dairy fermented products using pyrolysis/GC-mass spectrometry.

• 한국CDE학회논문집
• /
• 제12권1호
• /
• pp.50-57
• /
• 2007

In recent years, many robotics researches have been focused on developing human-friendly robots, that is, humanoid biped robots. The researches of humanoid robots include various areas such as hardware development, control of biped locomotion, artificial intelligence, human interaction, etc. The present work concerns the hardware development of a mid-size humanoid robot, BONOBO, focusing on rapid development of outer body parts with integrated application if CAD/CAM/CAE/RP. Most parts are three-dimensionally designed using 3D CAD, and effectively connected with CAE analyses using both kinematic simulation and structural analysis. In order to reduce lead time and investment cost for parts developments, Rapid Prototyping (RP) and CAM are selectively utilized for manufacturing body parts. These master parts are then replicated using the vacuum casting process, from which we can obtain plastic parts repeatedly. Through this integrated approach, the first prototype of BONOBO can be successfully developed with relatively low time and investment costs.

• 한국건축시공학회지
• /
• 제7권4호
• /
• pp.109-116
• /
• 2007

Building structures are generally large in size and have a long life, and the construction of such structures requires the investment of a huge amount of money and social infrastructure. Furthermore, building structures are closely related to people's life. Recently, however, the rapid development of society has been worsening air pollution, which is in turn accelerating the degradation of building structures. Thus, the safety of building structure is emerging as a critical issue. To cope with this problem, the government enacted "The Special Act on Safety Control for Infrastructure" but we need engineers' higher concern over the maintenance and reinforcement of existing structures. Recently researches are being made actively on repair mortar using ultra rapid hardening cement for recovering the performance of structures. The present study conducted an experiment on the basic physical properties of ultra rapid hardening mortar for repairing and reinforcing building structures using magnesia cement and mono-ammonium phosphate. In the experiment, we changed the water-cement ratio and carried out replacement at different ratio of MAP/MgO(%). We used retarder to have working life, and made comparative analysis through evaluating working life and fluidity and measuring strength by age.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.334-337
• /
• 2005

The objective of this research works is to propose a rapid development methodology of small size deep drawing tools for electronic parts utilizing the technology combination of CAE and RP/RT. The technology is applied to the development of deep drawing tools with a drain shape. The final surface of tools is obtained from the evaluation of the formability using the CAE. In order to manufacture the physical prototype of tools fer try-out terming, several fabrication experiments are carried out for three types of rapid tool manufacturing technology. Through the fabrication experiments, the acceptable rapid manufacturing technologies of deep drawing tools with a small size have been proposed.

• 대한한의학회지
• /
• 제43권4호
• /
• pp.74-88
• /
• 2022

Objectives: The purpose of this study is to design Korean-themed online public education content in Korean medicine using rapid prototyping instructional systems design (RPISD). This study presents cases of developing and converting face-to-face general education programs designed to increase the interest in and understanding of Korean medicine for the public into online programs within a short timeframe. Methods: This qualitative study is design and development research, which used the RPISD model to analyze the available resources utilized in the rapid development of public educational content and propose systematization and optimization measures by analyzing the needs of clients, learners, and the environment. The <Treasured Mirror of Eastern Medicine(DUBG)Open Course> was developed according to the model procedure, which involved needs analysis, development of course materials and manuscript, and storyboard creation and its filming and editing. Usability tests were conducted at all stages, and the opinions of clients, instructors, experts, and instructional designers were accommodated and reflected at each stage. Results: Using the rapid prototyping model, <Treasured Mirror of Eastern Medicine(DUBG)Open Course> was organized into five classes of 20 minutes each. Each class was developed in Korean and included English, Chinese, and Japanese subtitles in addition to Korean under the cooperative instructional design among clients, subject-matter experts, instructional designer and learners. Conclusion: The cooperative instructional design of stakeholders is significant in developing Korean medicine public education content online through extensive interaction and feedback from stakeholders in the early stage of educational content development.

• 한국측량학회지
• /
• 제36권6호
• /
• pp.581-588
• /
• 2018

본 연구는 다시기 영상의 활용이 유리한 RapidEye 영상의 활용성을 증대시키기 위하여, 이들 간에 지역적으로 존재하는 기하오차를 최소화 하는 정밀 상호좌표등록 기법을 제안하였다. 이를 위해, RapidEye 영상과 함께 제공되는 RPCs (Rational Polynomial Coefficients)를 이용하여 다시기 정사영상을 생성하고, 정사영상 간의 정밀 상호 좌표등록을 수행하였다. 정사영상을 생성하기 위해서 수치지도에서 추출된 DEM (Digital Elevation Model)을 활용하였으며, 정밀 상호좌표등록을 수행하기 위하여 RNCC (Registration Noise Cross Correlation) 기법을 적용하였다. 영광지역에 대해 2015년 5월부터 2016년 11월까지 획득된 RapidEye 1B 영상 총 4장을 활용하여 실험을 진행하였으며, 밴드별(blue, green, red, red edge, near-infrared)로 적용된 정밀 상호좌표등록 결과 비교분석을 통해 각 밴드가 보이는 상호좌표등록 적용 가능성 여부를 판단하였다. 실험 결과, RapidEye 영상의 모든 밴드를 활용하여 상호좌표등록이 가능하였으며, 상호좌표등록을 하지 않았을 때보다 다시기 영상 간 정량적/정성적으로 향상된 기하 일치도를 보였다. 특히 red와 red edge 밴드를 이용할 경우 다시기 영상 촬영시기의 계절적 차이에 관계없이 안정적인 상호좌표등록 결과를 보임을 확인하였다.