• 정보보호학회논문지
• /
• 제17권6호
• /
• pp.131-142
• /
• 2007

본 연구에서는 쾌속조형시스템의 요구사항에 부합되는 Semi-fragile 워터마킹 알고리즘을 제안한다. 쾌속조형시스템은 높은 정밀도를 요구하기 때문에 원본에 시각적인 변화를 주거나 왜곡을 할 경우, 출력물인 시제품에 큰 영향을 미친다. 따라서 이동, 회전, 신축과 같은 기하학적 변환이나 메쉬의 순서를 변경하는 변환, 파일 포맷 변환은 모델의 기본 형태를 변화시키지 않기 때문에 많이 사용되지만, 모델의 기본 형태를 변환시키는 데시메이션, 평활화 등은 사용하지 않는다. 제안된 알고리즘은 쾌속조형시스템의 이러한 제약을 고려하여 기하학적인 변환이나 메쉬 순서정렬, 파일 포맷 변환에는 강인하지만 그 외 변환에는 취약한 Semi-fragile 워터마킹 알고리즘이다. 제안한 워터마킹 알고리즘은 워터마크 정보의 삽입 전후 모델의 형태가 변하지 않으며, 쾌속조형시스템과 같은 고정밀도를 요구하는 기계공학 분야에서 데이터의 무결성 인증목적으로 사용할 수 있으며, 정보은닉 용도로도 사용할 수 있다.

• 대한기계학회논문집B
• /
• 제30권11호
• /
• pp.1051-1056
• /
• 2006

The mean and RMS velocity field of the respiratory gas flow in the human airway was studied experimentally by particle image velocimetry (PIV). Some researchers investigated the airflow for the mouth breathing case both experimentally and numerically. But it is very rare to investigate the airflow of nose breathing in a whole airway due to its geometric complexity. We established the procedure to create a transparent rectangular box containing a model of the human airway for PIV measurement by combination of the RP and the curing of clear silicone. We extend this to make a whole airway including nasal cavities, larynx, trachea, and 2 generations of bronchi. The CBC algorithm with window offset (64 $\times$ 64 to 32 $\times$ 32) is used for vector searching in PIV analysis. The phase averaged mean and RMS velocity distributions in Sagittal and coronal planes are obtained for 7 phases in a respiratory period. Some physiologic conjectures are obtained. The main stream went through the backside of larynx and trachea in inspiration and the frontal side in expiration. There exist vortical motions in inspiration, but no prominent one in expiration.

• 산업경영시스템학회지
• /
• 제33권4호
• /
• pp.159-166
• /
• 2010

The speed at which products are developed and released to market is tightly linked to profitability and market share. Hence, many companies are still in a desperate need of real Rapid Tooling (RT) technologies which can really help to expedite their prototype tooling and pre -production tooling for injection molding. Many other companies that have been very skeptical of RT technologies developed so far are working on Hybrid Tooling (HT) that can really meet the market standards. With the conviction that HT can be a reliable alternative for current RT technologies, this paper describes the experimentation how HT process has been being successfully established and effectively applied with typical case studies. Through the experimentation, Ceramic-filled SLA tooling was found to be aptly suited for the low grade mold, and Metal SLS tooling was found to be aptly suited for the medium volume mold both in terms of the lead time, dimensional accuracy, and tooling cost.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.64-70
• /
• 2007

Of all the rapid tooling (RT) methods currently available, thick-layer laminated tooling is the most suitable for large-scale, low-cost dies and molds. Currently, the determination of a lamina's contour or profile and the associated slicing algorithms are based on existing rapid prototyping (RP) data manipulation technology. This paper presents a new adaptive slicing algorithm developed exclusively for profiled edge laminae (PEL) tooling PEL tooling is a thick-layer RT technique that involves the assembly of an array of laminae, whose top edges are simultaneously profiled and beveled using a line-of-sight cutting method based on a CAD model of the intended tool surface. The cutting profiles are based on the intersection curve obtained directly from the CAD model to ensure geometrical accuracy. The slicing algorithm determines the lamina thicknesses that minimize the dimensional error using a new tool shape error index. At the same time, the algorithm considers the available lamination thicknesses and desired lamina interface locations. We demonstrate the new slicing algorithm by developing a simple industrial PEL tool based on a CAD part shape.

• 동력기계공학회지
• /
• 제12권2호
• /
• pp.29-34
• /
• 2008

Bellows is widely used in many industrial fields as it provides a relatively simple means of absorbing mechanical shock, vibration and thermal deformation with flexibility. In this study, the inherent dynamic characteristics of curved bellows are numerically studied according to the variation of angle, curvature and crest density, etc. For these numerical studies, a parametric finite element modelling program of curved bellows is constructed using ANSYS APDL. The validity of numerical results obtained from ANSYS software is experimentally verified using the test model made by RP machine SLA 5000.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.51-58
• /
• 1997

The verification of the STL file is essential to build the confident parts using a RP machine, because the STL file obtained from the CAD software has many errors-the orientation of triangle does not coincide with adjacent triangles or some triangles are omitted, overlpped and so forth. Especially, the STL file translated from the surface model has more errors than those translated from the solid model. In this study, all possible errors were classified with the most general from and the causes of errors were analyzed to verify and correct errors. Using the triangle based non-manifold geometric modeling, these errors were corrected. Especially, this study took the notice of the problem about the intersected triangles and non-manifold properties overlooked in the previous studies. But this study has a penalty on computing time of $O(n^2)$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.358-361
• /
• 2000

To reduce the leadtime for a new model according to the strict market requirements, automobile manufacturer begins to utilize 3-dimensional CAD based techniques such as DMU(Digital Mock-Up). RP(Rapid Prototyping), VE(Virtual Engineering). But, not so many satisfactory utilities have been introduced to deal with the emotional properties such as embossment on the surface of interior parts and touch from material characteristics in virtual environment. It is required to manufacture prototype parts to verify actual feeling of the passengers in real automobile. This paper suggests a methodology to enhance emotional property via embedding embossment on the surface of prototype car interior trim without deterioration of dimensional accuracy using RIM(Reaction Injection Molding) and vacuum forming method.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.135-140
• /
• 2004

Several studies have utilized physical models of the healthy nasal cavity to investigate the relationship between nasal anatomy and airflow. With our experiences of experimental investigations on nasal airflows in normal and abnormal nasal cavity models, we are going to deal with the topic that may contribute to the diagnosis and treatment of nasal diseases. In this paper, airflows in the normal and artificially deformed models, which simulate surgical treatment, are investigated experimentally by PIV. High-resolution CT data and careful surface rendering of computational model with the help of the ENT doctor provide more sophisticated nasal cavity models. The CBC PIV (Correlation Based Correction PIV) algorithm with window offset is used for PIV flow analysis. Average and RMS distributions in sagittal and coronal sections are obtained for inspiratory and expiratory nasal airflows. Comparisons in nasal airflows for both normal and deformed cases are also appreciated. In case of simulations of surgical operations, velocity and RMS distributions in coronal section changes locally, this may cause some difficulties in physiologic functions of noses and may hurt mucosal surface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2480-2482
• /
• 2003

As make a simulator including user interface functions like start & stop, load parameters, record and save, view 3D display has a real-like length and numerical value of sizes, represent real-shape of inner and outer part of robot, make the possible fast and slow selective observation as a adjust a step, receiving the images through the image device which attached in robot, so make a motion tester simulator of humanoid robot which coded by windows based GUI(Graphic User Interface) program with a MMI(Man Machine Interface) function that user can watch the environment which included robot and use a images. For implement this, we use a design data that converted data which made by use a CAD for Laser RP(Rapid Prototyping) progress into C coding for simulator programming. Using OpenGL, an API of graphic, it has a efficiency and detail of graphic operation. To make and test animation data, it has the option of save and resume in animation.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.267-269
• /
• 2004

본 연구에서는 일반적인 미세구조물 제작공정인 lithography 공정을 이용하지 않고 SLS(Selective Laser sintering)형 RP(Rapid Prototyping system)을 이용하여 패턴의 깊이가 400$\mu$m인 미세구조물을 제작하였다. 제작 공정변수 중 재료의 상태가 new powder 이고 배치각이 $0^{\circ}$ 일 때 패턴의 깊이, 선폭과 표면조도가 가장 잘 구현되었다.