• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.165-178
• /
• 2000

In this study the effects of block distance have been investigated on the particle deposition efficiency in the collecting cell of two-stage electrostatic precipitator by numerical analysis. Particle trajectories have been changed by the electrostatic and inertial force of particle with the inlet velocity electrostatic number and particle diameter. The total deposition efficiency has a minimum value by the interaction between the effect of particle inertial force and electrostatic force in the collecting cell. The increase of block distance makes the total deposition efficiency decrease under the range of the particle size which has the minimum deposition efficiency. However beyond the range of particle size which has minimum deposition efficiency total deposition efficiency has no trend with the variation of block distance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.149-149
• /
• 2010

The origin of the inhomogeneous distribution of photoluminescence (PL) peak wavelength on a commercial 2" GaN wafer for green light emitting diode has been investigated by wide momentum transfer (Q) range x-ray diffraction (XRD) profile of InGaN/GaN multiple quantum wells. Near the GaN (0004) Bragg peak, wide-Q range XRD (${\Delta}Q$ > $1.4{\AA}-1$) was measured along the growth direction. Wide-Q XRD gives precise and direct information of ultra-thin InGaN quantum well structure. Based on the QW structural information, the variation of PL spectra can be explained by the combined effect of temperature gradient and slightly uneven flow of atomic sources during the QW growth. In narrow variations of indium composition and thickness of QW, an effective indium composition can be a good character to match structural data to PL spectra.

• Elastomers and Composites
• /
• v.28 no.3
• /
• pp.198-204
• /
• 1993

The dielectric properties of silicone rubbers are very important to investigate the polymer structure. The characteristics of the dielectric absorption in silicone rubbers were studied in the frequency range of 30Hz to $1{\times}10^6Hz$ at the temperature range of $30^{\circ}C$ through $170^{\circ}C$. As the results of the study, dielectric constant, tangent 5 were measured $2.8{\times}4.5,\;0.007{\times}0.08$.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.344-348
• /
• 1999

Diamond like carbon(DLC) thin films possesed not only marvelous material characteristics such as large thermal conductivity, high hardness and being chemically inert, but also possesed negative electron affinity (NEA) properties. The NEA is an extremely desirable property of the material used in microelestronics and vacuum microelestronics device. DLC films were fabricated by pulsed laser deposition(PLD). Theeffect of the laser energy density and the substrate temperature on the properies of DLC films was investigated. The experiment was accomplished at temperatures in the range of room temperature to $600^{\circ}C$. The laser energy density was in the range of 6 $J/cm^2$ to 16 $J/cm^2$.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.363-364
• /
• 2010

Most LED drivers uses current control method to adjust LED current. Using AC power grid such as off-line converter, Buck topology is popular because input voltage of LED driver is much higher than LED output voltage. Normally DCM current control is more popular than CCM current mode control in the range of below 50W, But DCM characteristics are dependent on the input voltage variation. This paper deals with what should be considered in DCM for LED driver with valley fill circuit.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.5
• /
• pp.524-526
• /
• 1998

A sensitive and specific method is described for the determination of midazolam in human plasma. The drug was extracted from 1 mL of carbonate buffered plasma (pH 9.6) with 8 mL of diethyl ether. Famprofazone was used as internal standard. The organic phase was evaporated to dryness. The residue was dissolved in methanol for the direct analysis by gas chromatograph-nitrogen phosphorus detector system. In the concentration range of 1-5000 ng/mL, the calibration curve was linear. The coefficients of variation from the precision test were <6% at the range of the concentration of 0.10-2.00 μg/mL and the detection limit for midazolam in 1 mL of plasma was o.5 ng. This assay is more sensitive, selective, simple and rapid than earlier methods. Plasma midazolam concentrations were determined by this method after administration of midazolam.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.3
• /
• pp.279-287
• /
• 1993

Daily variation of particulate organic carbon(POC) and some factors controlling its level were examined for a semi-enclosed bay(Wonmun Bay, south coast of Korea), in which a lot of suspended oyster culture farms existed, in September, 1992. Observations were made at hourly interval. In spite of the relatively short survey period, strong short-term variation of POC concentration could be observed. Concentrations of POC were the range of $58{\sim}582{\mu}g/l(average 272{\mu}g/l)$ and their variation pattern was similar to those of chlorophyll a with the range of $0.90{\sim}7.25{\mu}g/l(average 3.35{\mu}g/l)$. The low C/N ratios also suggested that marine microalgae was a major component of POC for Wonmun Bay. Primary production, average $1.97\;gC/m^2/day$, was the main source of POC beacuse the supply of POC via freshwater input and exchange with the outer part of the bay was little. Oyster population also excreted a small amount of POC. About $40\%$ of produced POC was decomposed heterotrophically. Another important cause for the fluctuation of observed POC was tidal cycle. Considerable POC, which amounted $37\%$ of produced POC, was lost from the bay due to flushing by tidal cycle. It was also calculated that about $16\%$ was transported onto the sediment. It seemed that a part of POC was consumed by oyster and other heterotrophs.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.2
• /
• pp.105-111
• /
• 2001

This study is performed to develop an agricultural hydraulic structure for collecting and draining pipe using polymer concrete. The water permeability of collecting and draining pipe shows an 5.917$\ell$/$\textrm{cm}^2$/h, it is more 190 times as large as in the world maximum rainfall. The external pressure on the collecting and draining pipe is in the range of 1.85~5.25tf/m under 2-edge test, 2.6~6.2tf/m under sand mat and the vertical displacement is in the range of 0.48~1.06mm, 1.01~1.89mm, respectively. Also, an increasing rate of external pressure on the developed pipe is higher than that of PVC pipe to the variation of t/D. Accordingly, the pipe developed in this study will be used widely in agricultural hydraulic structures such as collecting and draining structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1030-1033
• /
• 2002

ZnO thin films on (100)p-type silicon substrates have been deposited by pulsed laser deposition(PLD) technique using an Nd:YGA laser with a wavelength of 266nm. The influence of the deposition parameters, such as oxygen pressure, substrate temperature and laser energy density variation on the properties of the grown film, was studied. The experiments were performed for substrate temperatures in the range of $200{\sim}500^{\circ}C$ and oxygen pressure in the range of $10^{-2}{\sim}10^2mTorr$. We investigated the structural, morphological and optical properties of ZnO thin films using X-ray diffraction(XRD), atomic force microscopy(AFM), photoluminescence(PL).

• International Journal of High-Rise Buildings
• /
• v.1 no.1
• /
• pp.1-13
• /
• 2012

The importance of appropriate use of damping evaluation techniques and points to note for accurate evaluation of damping are first discussed. Then, the variation of damping ratio with amplitude is discussed, especially in the amplitude range relevant to wind-resistant design of buildings, i.e. within the elastic limit. The general belief is that damping increases with amplitude, but it is emphasized that there is no evidence of increasing damping ratio in the very high amplitude range within the elastic limit of main frames, unless there is damage to secondary members or architectural finishings. The damping ratio rather decreases with amplitude from a certain tip drift ratio defined as "critical tip drift ratio," after all friction surfaces between primary/structural and secondary/non-structural members have been mobilized.