• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.688-691
• /
• 2006

The current system of the East China Sea, a marginal sea in the northwest Pacific, has a seasonal variation. The Changjiang Diluted Water, Chinese coastal water in the East China Sea, has different seasonal paths. It flows southward along the Chinese coast within a narrow band in winter and does northeastward the Korea/Tsushima Strait in summer, which has been a subject to many researchers. In particular, low salinity in the South Sea of Korea in 1996 and 1998 was in discord with the Changjiang River discharge and the Changjiang Diluted Water seems to play an important role in occurrence of red tide in the South Sea of Korea in 1997 and on the contrary, disappearance in the next year. These facts suggested that the Changjiang Diluted Water does not flow along the same path in every summer. According to the analyses for path of the Changjiang Diluted Water using ocean color images by SeaWiFS and salinity observations by shipboard CTD in August for recent years, the Changjiang Diluted Water in summer flowed within the range of direction from southeastward to north-northeastward anticlockwise. However, the Changjiang Diluted Water flowed northeastward toward Jeju Island of Korea for the most part. It is necessary to examine the influence of major factors on path variability of the CDW in summer such as surface wind, the Changjiang River discharge and background current.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.568-576
• /
• 2017

This paper presents a clock and data recovery circuit with an adaptive loop bandwidth calibration scheme and the idle power saved frequency acquisition. The loop bandwidth calibration adaptively controls injection currents of the main loop with a trimmable bandgap reference circuit and trains the VCO to operate in the linear frequency control range. For stand-by power reduction of the phase detector, a clock gating circuit blocks 8-phase clock signals from the VCO and cuts off the current paths of current mode D-flip flops and latches during the frequency acquisition. 77.96% reduction has been accomplished in idle power consumption of the phase detector. In the jitter experiment, the proposed scheme reduces the jitter tolerance variation from 0.45-UI to 0.2-UI at 1-MHz as compared with the conventional circuit.

• Journal of Environmental Health Sciences
• /
• v.10 no.1
• /
• pp.1-12
• /
• 1984

The stochastic characteristics of the daily range of water temperature variation was analyzed by employing the techniques of autocorrelation coefficient, autoreggresive model and crosscorrelation model. These time series included daily observations on maximum and minimum values of water temperature and air temperature. The measurement was made by automatic recording instrument at Gu-yee and Dook-do in Han River, and at Waegwan and Gu-mi in Nackdong River in 1981. As a result of this study, it was found that (1) The correlogram of daily water temperature ranges $\Delta AT_i$ and daily air temperature $\Delta AT_i$ at Gu-mi and Gu-yee showed the exponential curves. (2) The most high frequency values of $\Delta AT_i$ and $\Delta WT_i$ were 11$\circ$C and 0.5${\circ}C$ respectively at every measuring site. (3) The correlation coefficients between the daily mean air temperature AT$_i$ and the daily mean water temperature were fairly high as 0.966 at Dook-do and 0.949 at Gu-yee, but the correlation coefficients between $\Delta AT_i$ and $\Delta WT_i$ were very low as 0.1074 at Gu-yee and 0.0324 at Dook-Do.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.11 s.254
• /
• pp.1084-1092
• /
• 2006

Shape optimization of airfoil in WIG craft has been performed by considering the ground effect. The WIG craft should satisfy various aerodynamic characteristics such as lift, lift to drag ratio, and static height stability. However, they show a strong trade-off phenomenon so that it is difficult to satisfy aerodynamic properties simultaneously. Optimization is carried out through the multi-objective genetic algorithm. A multi-objective optimization means that each objective is considered separately instead of weighting. Due to the trade-off, pareto sets and non-dominated solutions can be obtained instead of the unique solution. NACA0015 airfoil is considered as a baseline model, shapes of airfoil are parameterized and rebuilt with four-Bezier curves. There are eighteen design variables and three objective functions. The range of design variables and their resolutions are two primary keys for the successful optimization. By two preliminary optimizations, the variation can be reduced effectively. After thirty evolutions, the non-dominated pareto individuals of twenty seven are obtained. Pareto sets are all the set of possible and excellent solution across the design space. At any selections of the pareto set, these are no better solutions in all design space.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.4
• /
• pp.528-530
• /
• 2002

The study was designed to evaluate the seasonal influences on cross-bred cow milk composition and paneer yield in Dhauladhar mountain range of sub-himalayan region. Fifty samples from each season were collected from a herd of $Jersey{\times}Red\;Sindhi{\times}Local$ cross-bred cows during summer (April-June), rainy (July-September) and winter (November-February) and analyzed for fat, total solids (TS) and solids not fat (SNF). Paneer was prepared by curdling milk at $85{\pm}2^{\circ}C$ with 2.5 per cent citric acid solution. Overall mean for fat, TS and SNF content of milk and paneer yield were 4.528, 13.310, 8.754 and 15.218 per cent respectively. SNF and TS content varied among seasons being highest in winter (8.983% and 13.639%) followed by summer (8.835% and 13.403%) and lowest in rainy season (8.444% and 12.888%). Paneer yield was lowest (14.792%) in rainy season and highest (15.501%) in winter season.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.83-92
• /
• 1993

This paper describes structural safety assessment techniques against crygenic temperature to design MRV type B LNG tank system. The following items are detail with in detail. (1) Leakage estimation of LNG through the propagating clacks at tank plate was performed and design of the range of catch basin(2ndary barrier) was followed to ensure the safety of ship structures against leaked LNG. (2) Temperature distribution analysis for cargo hold and skirt system was carried out using the steady state heat transfer analysis model for spherical LNG tank system. (3) Thermal stress distribution of skirt and tank system was calculated, where very stiff thermal variation was shwn through item(2) analysis.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.3
• /
• pp.206-217
• /
• 1994

In this study, indoor thermal parameters were measured to investigate the characteristics of thermal environments and 212 occupants were questioned to evaluate Korean thermal comfort in office building in summer. Thermal and comfort sensations were estimated using PMV(Predicted Mean Vote) and ET* (New Effective Temperature) which are most widely used nowadays. Comparing this experimental result with international standards and that of other research, Korean thermal responses were discussed. It was found that TSV(Thermal Sensation Vote) is more sensitive than PMV to the variation of temperature and that the measured percentage of dissatisfied is higher than PPD(Predicted Percentage of Dissatisfied) in real office building environments. By regression analysis, the following regression equation has been obtained: TSV=0.461ET*-11.808 and neutral temperature is $25.6^{\circ}C$ in this case. Thermal comfort range based on 80% satisfaction is also $24.0{\sim}26.8^{\circ}C$, which is about $1^{\circ}C$ higher than that of ANSI/ASHRAE Standard.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.6
• /
• pp.445-450
• /
• 2012

We have developed an implantable wireless sensor for real time pressure monitoring of blood circulation system. MEMS (micro-electro-mechanical system) technology was adopted as a sensor development method. The sensor is composed of photolithographically patterned inductors and a distributed capacitor in gap between the inductors. A resulting LC resonant system produces its resonant frequency in range of 269 to 284 MHz at 740 mmHg. To read the resonant frequency changed by blood pressure variation, we developed a custom readout system based on a network analyzer functionality. The bench-top testing of the pressure sensors showed good mechanical and electrical functionality. A sensor was implanted into tibial artery of farm pig, and interrogated wirelessly with accurate readings of blood pressure. After 45 days, the sensor's electrical response and histopathology were studied with good frequency reading and biocompatibility.

• ALGAE
• /
• v.18 no.4
• /
• pp.239-253
• /
• 2003

The morphotaxonomic characters of the genus Spirogyra were investigated to clarify their taxonomic category and the variation range among species on the basis of comparative morphological and numerical analyses by unialgal cultures and field samples collected from various freshwater habitats in Korea. 25 characters selected on morphological feature of the species were examined on 568 individuals for morphological comparisons and numerical analyses. Width, length and their length/width ratio of vegetative cell, shape of septum, chloroplast number, maximum width, width, length and their length/width ratio of female gametangium, length of male gametangium, size and shape of zygospore, and cell wall ornamentation of the spore showed a comparatively high vector in principal component analysis. In cluster analysis, 15 taxa analysed were divided into 8 major groups by the average taxonomic distance 1.0 level. Considering the morphology and numerical analysis, Spirogyra crassoidea could not be recognized as an independent species, therefore it was treated as a variety of S. ellipsospora. S. koreana (nom. invalidum), recognized as a new taxon, is under the investigation for its clear taxonomic category.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.394-402
• /
• 2000

This paper proposes a bifurcation theory method applied for voltage stability analysis and shows the improvement of voltage stability by attaching the FACTS devices in the power system. A power system is generally expressed by a set of equations of highly nonlinear dynamical system which includes system parameters(real or reactive power). Sometimes variation of parameters in the system may result in complication behaviors which give rise to system instability. The addition of FACTS increases the range of voltage stability in the power system. The effect of FACTS which improves voltage stability are illustrated in the case studies by delaying of Unstable Hopf Bifurcation and Saddle Node Bifurcation.