• Korean Journal of Applied Biomechanics
• /
• v.26 no.1
• /
• pp.83-92
• /
• 2016

Objective: This study aimed to compare differences in biomechanical factors according to distance changes in relation to approaches during a round of golf to obtain basic data on golf swings. Methods: The research subjects were 8 KPGA-affiliated professional golfers who performed approach shots that put a ball into a circle of 8 feet in diameter from distances of 30, 50, and 70 m. Data were collected by using six infrared cameras and a ground reaction force device, which were applied to calculate biomechanical factors by using Kwon3D XP. The calculated data were subjected to one-way ANOVA by using SPSS 20.0, with the significance level set at p value of 0.05. Results: Elapsed time, stance width, clubhead position variation, clubhead synthesis speed, and cocking angle significantly differed according to distance change during the approach swing. Clubhead speed was positively related with stance width and clubhead displacement. Ground reaction force significantly differed according to distance change during the approach swing. Factors before and after showed differences in other states, except in the impact state. Conclusion: In the present study, we drew several conclusions regarding biomechanical factors and ground reaction forces according to distance change in the approach swing of professional golfers. According to these conclusions, we suggest that distance control with swing range is more important than power control in maintaining the accuracy and consistency of golf swing and is the most important mechanism of golf swing.

• Structural Engineering and Mechanics
• /
• v.75 no.5
• /
• pp.621-631
• /
• 2020

A laboratory experiment is conducted is to investigate the behaviour of a low-mass-ratio and high aspect ratio flexible cylinder under vortex-induced vibration (VIV). A flexible cylinder with aspect ratio of 100 and mass ratio of 1.17 is towed horizontally to generate uniform flow profile. The range of Reynolds number is from 1380 to 13800. Vibration amplitude, in-line and cross-flow frequency response, amplitude trajectory, mean tension variation and hydrodynamic force coefficients are analyzed based on the measurement from strain gauges, load cell and CCD camera. Experimental results indicate that broad-banded lock-in region is found for the cylinder with a small Strouhal number. The frequency switches in the present study indicates the change of the VIV phenomenon. The hydrodynamic force responses provide more understanding on the VIV of a low mass ratio cylinder.

• Economic and Environmental Geology
• /
• v.32 no.1
• /
• pp.83-91
• /
• 1999

Coal properties are controlled by the following two factors : One is the maceral components and the other is the degree of coalification. In other words, even if coals in question indicate the same degree of coalification, their chemical and physical properties considerably vary one another when their maceral components are different. It is well known that virtrinite reflectance is the best single criterion for the degree of coalification covering the whole range of coal rank. Some authors have recently insisted that sporinite fluorescence is more leliable coal rank parameter than vitrinite reflectance in case of low rank coals. In this paper, to examine the relince of sporinite fluorescence as coal rank parameter, fluidity analysis of coals is newly performed and the data are analyzed in comparision with those of virinite reflectance, sporinite fluorescence and maceral components. The results of this study are as follows; 1) Vitrinite reflectance becomes low when degradinite content is high within one columnar samples, and vice versa. 2) variation of vitrinite reflectance depend on degradinite content and on difference of roiginal plant. 3) In dealing with the Japanese paleogene coals, sporinite fluorescence is more reliable parameter indicating the degree of coalification than vitrinite reflectance. 4) Maximum fluidity increases exponetially in proportion to the increases of degradinite content.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.87.1-87.1
• /
• 2011

Since early 90's, the solar X-ray telescopes such as Yohkoh SXT and Hinode XRT have observed coronal magnetic structures on the Sun's surface in the range of about $40'{\times}40'$ field-of-view (FOV) covering the full solar disk. Thus it has been stressed by the scientists that the optical structure of solar telescopes should be designed with care for improving the uniformity over a wide FOV. There would be, however, no unique solution in designing the optical system of a telescope for overcoming perfectly the problem of off-axis response variation. As a consequence, the correction of optical imperfectness of telescopes has become an important calibration step that should be performed beforehand when the observed images are to be used for photometric purposes. In particular, a special care should be taken when performing the temperature analysis with thin and thick filters for flaring activities observed at the periphery of the full FOV. From the analyses of both pre-launch calibration and in-flight observation data, the optical characteristics for describing the performance of solar X-ray telescopes, especially in view of their energy dependence, will be introduced and discussed in our presentation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.5
• /
• pp.509-524
• /
• 2017

Experiments and a numerical simulation were conducted to investigate the deformation and impact behavior of a corroded pipe, as corrosion, fatigue, and collision phenomena frequently occur in subsea pipelines. This study focuses on the deformation of the corrosion region and the variation of the geometry of the pipe under impact loading. The experiments for the impact behavior of the corroded pipe were performed using an impact test apparatus to validate the results of the simulation. In addition, during the simulation, material tests were performed, and the results were applied to the simulation. The ABAQUS explicit finite element analysis program was used to perform numerical simulations for the parametric study, as well as experiment scenarios, to investigate the effects of defects under impact loading. In addition, the modified ASME B31.8 code formula was proposed to define the damage range for the dented pipe.

• Plant Resources
• /
• v.7 no.2
• /
• pp.141-146
• /
• 2004

Frequent occurrence of off-type plants in a given cultivar has been a serious problem in both breeder's and farmer's fields. An experiment was designed to examine the differences in rate of occurrence of off-type plants among Tongil-type cultivars (high yielding cultivars derived from indica/japonica hybridization) from which the possible cause of higher occurrence of off-type plant in a specific cultivar was deduced. Among five Tongil-type cultivars examined for morphological variant in the field, only one cultivar, Dasanbyeo, had off-type plants. When analyzed with SSR markers, off-type plants showed different band patterns from original cultivar, having several extra bands in addition to cultivar-specific band, suggesting that off-type plants were originated from Dasanbyeo, rather than originated from mixing or mishandling of seed materials with other cultivars. The possible cause of off-type occurrence seems to be natural pollination with other cuItivars adjacent to the original cultivar during seed multiplication. This was supported from the observation that self-crossed progeny of the off type plants showed a wide range of variation of agronomic traits which could not be observed when there was a smaller introduction of genes to the fixed germplasm as happened in the case of cultivar mutation. Another evidence supported this idea that Dasanbyeo showed much of difference in floral organ and behavior to other cultivar to be subjected to higher out-crossing than other cultivars examined.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.4
• /
• pp.181-190
• /
• 2000

Vibration analysis for some of simple supported antisymmetric composite laminated plate loaded uniform axial-loading and attached mass was carried out. Because it is complicated to analyze this type of plate by theory of antisymmetric laminate possibility for application of theory of special orthotropic laminate was studied, and natural frequency of laminated plate attached mass was calculated. Stiffness $B_{16}$, $B_{26}$, $D_{16}$, $D_{26}$ for this type of antisymmetric laminated plate converge on zero as the number of ply increases and it is possible to use classical theory by reason that considered plate has quasi-homogeneity without relevance to variation of angle. Difference between results by theory of antisymmetric and special orthotropic laminate is 0.36~1.96%, therefore it is convenient to analyze this by use of theory of special orthotropic laminate. When composite laminated plate with attached mass is analyzed range that Was able to neglect self-weight of plate was proposed.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.372-378
• /
• 2012

This paper deals with a 3-phase voltage disturbance generator for a performance test of custom power devices such as dynamic voltage restorers (DVR), dynamic uninterruptable power supplies (UPS), etc. The operating principle of the proposed circuit is described in each mode of voltage sag, swell, outage, and unbalance. The main components of the proposed disturbance generator are silicone controlled rectifier (SCR) thyristors, variable autotransformers, and transformers. Therefore, the disturbance generator can be implemented with a considerably low cost compared to the conventional pulse width modified (PWM) inverter and converter type generators. Furthermore, it has good features of high reliability with simple structure, high efficiency caused by no PWM switching of the SCR thyristors, and easy control with a wide variation range. To verify the validity of the proposed scheme, simulations and experiments are carried out.

• Journal of the Korean Ceramic Society
• /
• v.34 no.7
• /
• pp.693-698
• /
• 1997

The refractive index and dispersion in the (100-x)(0.6CaO.0.4Al2O3).xSiO2(x=0~30) glasses were investigated. As the amount of SiO2 increased, the refractive index decreased. The change of refractive index was attributed to the change of the molar refraction rather than the molar volume. When the amount of SiO2 was smaller than 20 mol%, the average electronic transition energy gaps(E0) and the electronic oscillator strengths(Ed) were about 10.9($\pm$0.1) nd 18($\pm$0.5)eV, respectively. However E0 and Ed of the glass (CAS30) with 30 mol% SiO2 increased to 12.63 and 19.89eV, respectively. The similar results was observed in the variation of Abbe Number. Abbe number of the glass in the range of 0~20 mol% SiO2 was about 46 and that of CAS30 increased to 60. The zero-material dispersion wavelength({{{{ lambda }}0) of pure calcium aluminate glass was 1.8 ${\mu}{\textrm}{m}$. As the amount of SiO2 increased, the zero-material dispersion wavelength shifted to a shorter wavelength. {{{{ lambda }}0 of CAS30 was 1.5 ${\mu}{\textrm}{m}$, that is currently using for the optical telecommunication system.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1E
• /
• pp.38-44
• /
• 2010

This paper is based on our comments and proposed amendments to the documents, Annex A, Phantom for determining Maximum Depth of Penetration, and Annex B, Local Dynamic Range Using Acoustical Test Objects 87/400/CDV. IEC 61391-2 Ed. 1.0 200X, prepared by IEC technical Committee 87; Ultrasonics. The documents are concerned with the influence of microstructure of reference target material on the ultrasonic backscattering. Previous works on the attenuation due to backreflection and backscattering of reference target materials are reviewed. The drawback to the use of ungraded stainless steel and metallic materials without microstructural data such as, crystal structure, basic acoustic data of sound velocity and attenuation, grain size, roughness and elastic constants has been discussed. The analysis suggested that the insightful conclusion can be made by differentiating the influence arising from target size and microstructure on the backscattering measurements. The microstructural parameters are associated with physical, geometrical, acoustical and mechanical origins of variation with frequency. Further clarification of such a diverse source mechanisms for ultrasonic backscattering would make the target material and its application for medical diagnosis and therapy simpler and more reliable.