• Geomechanics and Engineering
• /
• v.31 no.2
• /
• pp.223-235
• /
• 2022

Bearing capacity of shallow foundations is often determined for either dry or saturated soils. In some occasions, foundations may be subjected to external loading which is inclined and/or eccentric. In this study, the ultimate bearing capacity of shallow foundations resting on partially saturated coarse-grained cohesionless and fine-grained cohesive soils subjected to a wide range of combined vertical (V) - horizontal (H) - moment (M) loadings is rigorously evaluated using the well-established limit equilibrium method. The unified effective stress approach as well as the suction stress concept is effectively adopted so as to simulate the behaviour of the underlying unsaturated soil medium. In order to obtain the bearing capacity, four equilibrium equations are solved by adopting Coulomb failure mechanism and Bishop effective stress concept and also considering a linear variation of the induced matric suction beneath the foundation. The general failure loci of the shallow foundations resting on unsaturated soils at different hydraulic conditions are presented in V - H - M spaces. The results indicate that the matric suction has a marked influence on the bearing capacity of shallow foundations. In addition, the effect of induced suction on the ultimate bearing capacity of obliquely-loaded foundations is more pronounced than that of the eccentrically-loaded footings.

• Geomechanics and Engineering
• /
• v.14 no.1
• /
• pp.91-98
• /
• 2018

Length of a vehicle is an important variation to generate different variants of an automotive platform. This parameter is usually adjusted by embedding dimensional flexibility into different components of the Body in White (BIW) including the floor pan. Due to future uncertainties, it is not necessarily possible to define certain values of wheelbase for the future products of a platform. This work is performed to add flexibility into the design process of a length-variable floor pan. By means of this analysis, the cost and time consuming process of optimization is not necessary to be performed for designing the different variants of a product family. Stiffness and mass of the floor pan are two important functional requirements of this component which directly affect the occupant comfort, dynamic characteristics, fuel economy and environmental protection of the vehicle. A combination of Genetic algorithm, GMDH-type of artificial neural networks and TOPSIS methods is used to optimally design the floor pan associated with arbitrary length of the variant in the defined system range. The correlation between the optimal results shows that for a constant mass of the floor pan, the first natural frequency decreases by increasing the length of this component.

• The Korean Journal of Nuclear Medicine
• /
• v.24 no.2
• /
• pp.260-266
• /
• 1990

Scintigraphic measurement of gastric emptying time has been reported to be influenced by the variation in depth of radionuclide within the stomach. In order to determine the effect of tissue attenuation in the measurement of gastric emptying time, 15 gastric emptying studies were performed with Tc-99m labeled egg sandwiches. Single anterior detector method overestimated the T1/2 by an average of 13% than geometric mean method and range of overestimation was wide (from -13% to 132%). Therefore, to evaluate the gastric empthying time accurately, methods of attenuation correction are needed.

• Advances in concrete construction
• /
• v.6 no.2
• /
• pp.145-157
• /
• 2018

This paper presents a review on the use of Silica Fume (SF) as a mineral admixture in the concrete. Distinctive outcome from several researches have been demonstrated here, particularly emphasizing on the fresh and hardened properties of concrete when blended with Silica Fume (Micro-silica or Nano-silica). The results showed a substantial enhancement in the mechanical properties of concrete when replaced with SF. The review also presented a brief idea of percentage replacement of SF in case of normal and high-strength concrete. A decreasing trend in workability (slump value) has been identified when there is a increase in percentage replacement of SF. It can be concluded that the optimize percentage of replacement with SF lies in the range of 8-10% particularly for compressive strength. However the variation of blending goes up to 12-15% in case of split tensile and flexure strength of concrete. The study also demonstrates the effect of silica fume on durability parameters like water absorption, permeability, sulphate attack and chloride attack.

• Journal of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.176-197
• /
• 1962

Seasonal variations of chemical constituents of estuarine water at a definite station of the tidal flat in Guang Yang inlet have been determined for two days a month. The range and mean of the annual variations are as follows:Tidal variations through a year are as follows:1. Although the tidal value of pH is almost constant during one tidal cycle, it raises abruptly 0.1-0.2 intervals of pH value during the first period of flood.2. The lower values of chlorinity, magnesium and calcium contents have been determined the nearer the slack after ebb, and slightly higher during the first period of flood tide than the last of ebb. The tidal change of calcium contents is more remarkable than of magnesium.3. The higher per cent saturation values of dissolved oxygen, sometimes higher than 100 per cent, re determined the nearer the slack after ebb.4. The total nitrogen contents, relatively poor, varies accidentally during one tidal cycle, whereas phosphate-P and silicate-Si are rich at the slack after ebb and increase proportionally to the mixing percentage of fresh water. The average values, 52.2 and 18.5 of Si/P and N/P are greater than of the normal.5. The acid soluble iron contents, lower in winter than in summer, is also varies accidentally during one tidal cycle and the magnitude of the variation is large.6. The chemical composition considered from the value of Ca/Cl or Mg/Cl of estuarine water varies according to the chlorinity even at the high chlorinity of 18-19%.

• Geomechanics and Engineering
• /
• v.10 no.5
• /
• pp.617-633
• /
• 2016

A numerical study has been conducted to examine the improvement achieved in the ultimate pullout capacity of horizontal circular anchor plates embedded in undrained clay, by constructing granular columns of varying diameter over the anchor plates. The analysis has been carried out by using lower bound theorem of limit analysis and finite elements in combination with linear programming. The improvement in uplifting capacity of anchor plate is expressed in terms of an efficiency factor (${\xi}$). The efficiency factor (${\xi}$) has been defined as the ratio of ultimate vertical pullout capacity of anchor plate having diameter D embedded in soft clay reinforced by granular column to the vertical pullout capacity of the anchor plate with same diameter D embedded in soft clay only. The variation of efficiency factor (${\xi}$) for different embedment ratios and different diameter of granular column has been studied considering a wide range of softness of clay and different value of soil internal friction angle (${\phi}$) of the granular material. It is observed that ${\xi}$ increases with an increase in diameter of the granular column ($D_t$) and increase in friction angle of granular material. Also, the effectiveness of the usage of granular column increases with decrease in cohesion of the clay.

• Journal of Veterinary Clinics
• /
• v.32 no.4
• /
• pp.319-323
• /
• 2015

The performance of diagnostic test accuracy is usually summarized by a variety of statistics such as sensitivity, specificity, predictive value, likelihood ratio, and kappa. These indices are most commonly presented when evaluations of competing diagnostic tests are reported, and it is of utmost importance to compare the accuracies of diagnostic tests to decide on the best available test for certain medical disorder. However, it is important to emphasize that specific point values of these indices are merely estimates. If parameter estimates are reported without a measure of uncertainty (precision), knowledgeable readers cannot know the range within which the true values of the indices are likely to lie. Therefore, when evaluations of diagnostic accuracy are reported the precision of estimates should be stated in parallel. To reflect the precision of any estimate of a diagnostic performance characteristic or of the difference between performance characteristics, the computation of confidential interval (CI), an indicator of precision, is widely used in medical literatures in that CIs are more informative to interpret test results than the simple point estimates. The majority of peer-reviewed journals usually require CIs to be specified for descriptive estimates, whereas domestic veterinary journals seem less vigilant on this issues. This paper describes how to calculate the indices and associated CIs using practical examples when assessing diagnostic test performance.

• Advances in nano research
• /
• v.14 no.1
• /
• pp.81-92
• /
• 2023

In this work, the effect of the addition of Aerosil 200, an insulating resin applied in many industries, on the water absorption of cement plast mixture has been experimentally evaluated. First, the preparation stages of cement plast mixture was evaluated based on corresponding standards and then, the effect of the addition of Aerosil 200 nanoparticles (NPs) to cement plast mixtures with sand weight percentage range of 0-0.1% on the variation of water absorption properties was evaluated based on National Standard Institution of Iran 20185 for Concrete Flooring Blocks - Requirements and Test Procedures. Based on the obtained results, it could be found that excessive addition of NPs did not affect the physical properties of the final product. Water absorption percentage was increased in the weight percentage of cement. By the increase of the amount of Aerosil 200 NPs in the prepared cement plast mixture, the percentage of water absorption in weight percentage of sand was decreased. Cement plast with NPs presented significantly lower water absorption than that without NPs.

• Journal of Environmental Impact Assessment
• /
• v.14 no.2
• /
• pp.63-73
• /
• 2005

This study was performed to characterize stormwater runoff of pollution material from nonpoint sources during rainfall in drainage basins of Hongjechun watershed, and to suggest management methods to control the first flush of nonpoint sources. We conducted 4 times of field surveys including 3 times of wet period and 1 times of dry period for 5 stations, which consist of 3 stations in main stream of Hongjechun and 1 station in tributaries of Sinyoungchun and Gukichun, respectively. The variation of pollutant concentrations in terms of BOD, COD, SS and TP was large depending on the flow rate of stormwater, while a little change of TN concentration was investigated. Depending on the rainfall event, the difference of flowrates, and runoff loadings was large, while the difference of those for dry wether period was not noticeable for various sub-basins. In the results of unit load calculation, the range of 153-277 kg/ha/yr for BOD, 222-422 kg/ha/yr for COD, 264-432 kg/ha/yr for SS, 40-70kg/ha/yr for TN, and 13-25 kg/ha/yr for TP was obtained for Hongjechun, Sinyoungchun, and Gukichun sub-basins. Compared with the previous studies, the result of this study was founded to be acceptable.

• Journal of the Korean Home Economics Association
• /
• v.11 no.1
• /
• pp.44-56
• /
• 1973

The effect of the temperature and the time of scalding, and the addition of various seasoning on the remaining % of total Vitamin C contained in Spinach (Spinacia oleracea) was studied and discussed by means of chemical kinetics. The quantitative measurements of total Vitamin C were made by 2,4-dinitrophenyl hydrazine (DNPH) method with Clinical Electrophotometer (Fisher). The sample spinach contains 39.88mg. % of total vitamin C on the average, and the ratio of oxidized and reduced forms of Vitamin C is 1 : 4.7. When the sample spinach was scalded, the kinetics of the decrease of the remaining total vitamin C. % was observed to follow the first order reactions regardless of the temperatures applied (i,e. 70$^{o}$ , 80$^{o}$ , 90$^{o}$ and 100$^{o}$ ) with half-life range of 2.10 - 1.47 minutes. In the case of the addition of various seasonings, the addition of various seasonings, the kinetics remaining Vitamin C % showed to be the zero order reactions regardless of the kinds of seasonings and storage temperatures. With the addition of seasonings, the stability of Vitamin C was found to be increased in the order table salt+sesame oil+vinegar+soybean sauce, without seasoning, table salt+sesame oil, table salt+sesame oil+soybean sauce.