• Journal of Korean Foot and Ankle Society
• /
• v.25 no.4
• /
• pp.165-170
• /
• 2021

Purpose: This study sought to evaluate the clinical effectiveness of the shortening effect of the modified Weil osteotomy for the treatment of Freiberg's disease. Materials and Methods: We reviewed 21 cases treated with the modified Weil osteotomy for Freiberg's disease from November 2005 to June 2019. The average follow-up period was 32.5 months and the mean age of the patients was 38.3 years. The clinical results were analyzed using the American Orthopaedic Foot and Ankle Society (AOFAS) lesser metatarsophalangeal-interphalangeal scale, the visual analogue scale (VAS), and the range of motion (ROM) of the metatarsophalangeal joint. In the radiologic evaluation, the length of preoperative and postoperative metatarsal shortening was compared. Results: The average AOFAS lesser metatarsophalangeal-interphalangeal scale showed an improvement from 60.5 preoperatively to 90.9 at the latest follow-up. VAS showed a decrease from 5.4 preoperatively to 0.9 at the latest follow-up. ROM of the affected metatarsophalangeal joint increased from 40.2 degrees preoperatively to 58.6 degrees at the latest follow-up. The mean length of metatarsal shortening was 6.7 mm. There was no transfer metatarsalgia, osteonecrosis, and definite joint space narrowing. Conclusion: Modified Weil osteotomy with second layer cutting is an effective treatment option to restore the joint surface and painless joint motion for patients with Freiberg's disease.

• Geomechanics and Engineering
• /
• v.28 no.3
• /
• pp.265-281
• /
• 2022

A set of slurry shield test system capable of cutter cutting and slurry automatic circulation is used to investigate the deformation characteristics, the evolution characteristics of support resistance and the distribution and evolution process of earth pressure during excavating and collapsing of slurry shield tunneling in circular-gravel layer. The influence of cover-span ratio on surface subsidence, support resistance and failure mode of excavation face is also discussed. Three-dimensional numerical calculations are performed to verify the reliability of the test results. The results show that, with the decrease of the supporting force of the excavation face, the surface subsidence goes through four stages: insensitivity, slow growth, rapid growth and stability. The influence of shield excavation on the axial earth pressure of the front soil is greater than that of the vertical earth pressure. When the support resistance of the excavation face decreases to the critical value, the soil in front of the excavation face collapses. The shape of the collapse is similar to that of a bucket. The ultimate support resistance increase with the increase of the cover-span ratio, however, the angle between the bottom of the collapsed body and the direction of the tunnel excavation axis when the excavation face is damaged increase first and then becomes stable. The surface settlement value and the range of settlement trough decrease with the increase of cover-span ratio. The numerical results are basically consistent with the model test results.

• Journal of Cerebrovascular and Endovascular Neurosurgery
• /
• v.25 no.4
• /
• pp.475-484
• /
• 2023

Objective: This study aimed to develop microsurgical strategies based on the anatomical relationship between dorsal internal carotid artery (ICA) aneurysms, the falciform ligament (FL), and the anterior clinoid process (ACP). Methods: Between 2017 and 2022, 25 patients with unruptured dorsal ICA aneurysms (less than 4 mm in diameter) underwent microsurgical direct clipping. These cases involved the left ICA (n=17) and the right ICA (n=8), with a mean aneurysm size of 3.3 mm (range, 2.5 to 4 mm). We used computed tomography angiography (CTA) and digital subtraction angiography to elucidate the anatomical relationship between dorsal ICA aneurysms and other structures. All procedures involved an ipsilateral pterional approach with securement of the ipsilateral cervical ICA for proximal control. Results: Among the 25 dorsal ICA aneurysms, 8 (32%) were clipped without the FL being incised. Another 5 (20%) were clipped solely after the FL was cut. For the remaining 12 cases, the aneurysms were successfully clipped following FL incision and partial ACP removal. Patients exhibited favorable postoperative recoveries with good outcomes, and postoperative CTA revealed complete aneurysm clipping without any residual remnants. Conclusions: We were able to perform clipping without removing the ACP in 13 patients (52%), and in 8 of these (32%), the clipping was carried out directly without cutting the FL. Microsurgery, coupled with proximal control of the cervical ICA, can serve as a viable alternative for patients with small dorsal ICA aneurysms, especially when endovascular treatment options are limited, and 3D CTA confirms a clear anatomical relationship with the ACP.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.157-168
• /
• 2011

Recently, the cases of freeze-thaw distress on concrete pavement in domestic have been reported periodically. Hereupon, the necessity to establish the standard of spacing factor came to the fore. The test method for analyzing spacing factor is provided in the standard of ASTM C 457. Since researchers tend to judge study results subjectively, the results should be revised throughly. Image analysis program for determining the characteristics of air-void system on hardened concrete identify air void through the difference of a color. The pixel intensity values used in this program have a significant effect on the analysis results. This study compared the automated void count by varying pixel intensity values with the manual void count in order to determine the optimum range of pixel intensity values. Also, this study analyzed the air-void characteristics on eight kinds of concrete mixtures. In this study, it was confirmed that the variation of void counted manually was around 10% from the results of round robin test, and that the optimum range of pixel intensity values is around 80~90. And it was also confirmed that air content (as a whole) was increased generally and spacing factor was decreased by increasing air-entrainer content. But some concrete mixtures showed a tendency that air content was constant and spacing factor was decreased by increasing air-entrainer content. This causes the air entrained by air-entrainer has more influence on spacing factor than air content. Also, the deviation of spacing factor by cutting position of concrete specimen was about 30~100${\mu}m$ because of the limit of 2-D image analysis. The additional study about variation of spacing factor by cutting position of concrete specimen will be performed later.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.1-8
• /
• 1965

In this study, the present institution of reserved forests in Korea has been criticized through the analysis of the present situation of reserved forests in Korea, and mainly, on designation and cancellation of them because of this important institution thought as restriction of forest ownership. Reserved forest land in Korea as of the end of 1962 is 996,915 chungbo in area, or about 14.8% of the total forest land area, 6,750,324 chungbo in Korea, and we can find that the area of reserved forest land has increased remarkably since the Liberation in 1945, in comparison with about 180,000 chungbo-a little over 1% of the total forest land area, 16,000,000 chungbo, through Southern and Northern Korea till the Liberation in 1945. This fact clearly proves that Korean forests are extremely devastated since the Liberation in 1945, and in Korea we can find that reserved forest policy is very important in forest policy, consequently, reserved forest institution must be dealt with care. Moreover, the area of reserved forest land, 996,915 chungbo, which is divided into 43,820 chungbo of national forest land, 59,302 chungbo of public forest land, 893,793 chungbo of private forest land, and private forest land is excellently large, or about 89.7% of the total area of reserved forest land. In this number, we may understand the fact that reserved forests have the most influences on private forests, therefore, we may recognize that it is necessary for reserved forest constitution which is infringement of private right to be carried out carefully. From the first beginning, the institution of reserved forests is serious restriction to the forest ownership. Consequently, when the area of reserved forest land grows, it interferes seriously with the free forest management and the desire for forest own ership is decreased, at the same time, forest enterprise results in obstruction. Especially, Korean forests are destroyed extremely at present, so, intensification of reserved forest institution is unavoidable for completion of the national aim which forests have, but the author thinks that reserved forest institution must be as avoidable as possible, and we have to obtain good results by supervision of forest management which is regulated in the Forest Law. Consequently, designation of reserved forests must be minimized, and although forests were already designated as reserved forests they must be cancellated as fast as fast as possible and put them free in the owner's hands when they are in cancellation conditions. According to the provision of Article 18 of the Forest Law concrete cases designated as a reserved forest are enumerated for the purpose of maintaining the forest ownership and avoiding to give the forest authorities a free hand in order to protect forest owners from one-sided damage. Therefore, the forest authorities must not abuse the institution of reserved forests, and it is not good tendency to give only the authorities a free hand in eesignation and cancellation of reserved forests, and especially, when the forest owners object to that, establishing some legal organization like the reserved forest council in each province in order to hear about impartial opinions, and it is more suitable than administrative disposal by the same organization. The compensation of damages for reserved forests by the provision of Article 25 of the Forest Law is a different problem by forest policy, but the results of compensation of damages regulated in the Forest Law are wholly lacking up to now, the author thinks that this is caused to poor forest cover, the forest owner's unconcern and insincerity of administrative authorities. Therefore, the government must enlarge the range of compensation and minimize the forest owner's economic sacrifice, also, the government must mollify the conditions of the legal restrictions to reserved forests, and harmonize with functions of national conservation and economy. This means that it is necessary to modify the restrictive conditions for the effective utilization of forest resources within the range in which can be attained the purpose of designation, from permanent prohibition of cutting. Except the reserved forests of fish habitat, public sanitation, maintaining scenery and navigational mark ect., most of reserved forests are prohibited from cutting, and the present situation of forests in Korea are extremely devastated and those forests are not so expected in cancellation possibility in near future. Therefore, when the forest owners apply for national purchase of those reserved forests, the government had better nationalize them, protect and manage to reduce the forest owner's economic sacrifice.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.355-361
• /
• 2006

In large scale environments like airport, museum, large warehouse and department store, autonomous mobile robots will play an important role in security and surveillance tasks. Robotic security guards will give the surveyed information of large scale environments and communicate with human operator with that kind of data such as if there is an object or not and a window is open. Both for visualization of information and as human machine interface for remote control, a 3D model can give much more useful information than the typical 2D maps used in many robotic applications today. It is easier to understandable and makes user feel like being in a location of robot so that user could interact with robot more naturally in a remote circumstance and see structures such as windows and doors that cannot be seen in a 2D model. In this paper we present our simple and easy to use method to obtain a 3D textured model. For expression of reality, we need to integrate the 3D models and real scenes. Most of other cases of 3D modeling method consist of two data acquisition devices. One for getting a 3D model and another for obtaining realistic textures. In this case, the former device would be 2D laser range-finder and the latter device would be common camera. Our algorithm consists of building a measurement-based 2D metric map which is acquired by laser range-finder, texture acquisition/stitching and texture-mapping to corresponding 3D model. The algorithm is implemented with laser sensor for obtaining 2D/3D metric map and two cameras for gathering texture. Our geometric 3D model consists of planes that model the floor and walls. The geometry of the planes is extracted from the 2D metric map data. Textures for the floor and walls are generated from the images captured by two 1394 cameras which have wide Field of View angle. Image stitching and image cutting process is used to generate textured images for corresponding with a 3D model. The algorithm is applied to 2 cases which are corridor and space that has the four wall like room of building. The generated 3D map model of indoor environment is shown with VRML format and can be viewed in a web browser with a VRML plug-in. The proposed algorithm can be applied to 3D model-based remote surveillance system through WWW.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.189-199
• /
• 2015

Our country's leading granite weathered soil of the ground slope failures that occur in cutting slope most cases, it does not require in-depth to the shear strength most of the surface layer is affected by weathering (1~2 m) at a shallow depth close to the ground, it is important to identify the reliability. Based on the result obtained in actual field investigation, the field slope type was classified by each type of wedge slope, Infinite slope, finite slope -I and finite slope -II, and the slope stability was examined respectively. In addition, using the numerical analysis results, the relationship between the slope inclination angle and safety factor was analyzed and it tried to offer basic data to which the stability in the field slope was able to be estimated by analyzing the safety factor change of the slope according to the slope type. In this study, classified into four types of natural slope, safety factor estimation method by slope types is proposed through the numerical analysis. However, some limit exists in generalizing in this research because it does not test various case studies. Therefore, the case study of a wide range of various sypes to assess the safety of various types slope can be made, accommodate a wide range of field conditions reasonable risk evaluation criteria may be derived.

• Journal of Biosystems Engineering
• /
• v.12 no.3
• /
• pp.30-41
• /
• 1987

The geometrical shape of a plow bottom may be the most important factor affecting the performance of a plow for a given soil and operating conditions. There are various designs of the Jaenggi (Korean plow) available commercially, which may be different from each other and from the plow (Western plow) in respect to the shape and performance. This study was intended to investigate the geometrical characteristics of Jaenggi. The coordinate digitizer equipped with 3 potentiometers was designed and manufactured for measurement of the shape of curved plane of moldboard and share. The digitizer was connected to a microcomputer having the data acquisition system. This device was used to analyze the plow bottoms of 5 differently-made Jaenggis and one cylindrical plow. The results of the study are summarized as follows: 1. It was possible to measure easily and quickly the curved plane of plow bottom and to plot the view on three major plans using the coordinate digitizer electrically connected to a microcomputer system. 2. The shape of five Jaenggi bottoms analyzed could be characterized by the cutting angle having the range of $33-42^{\circ}$, the maximum share-lift angle of $41-50^{\circ}$, and the setting angle of moldboard wing of $46-70^{\circ}$. The most critical difference of the shape factors between the Jaenggi and the plow was found in the maximum share-lift angle, the former was more than twice as much as the latter. 3. The analysis of the shape of Jaenggi bottoms showed that the share projections on 3 major plans had a varied triangle, which was quite different from that of plow bottom. Especially, it was analyzed that the shape of furrow slice for the Jaenggi had a skewed rectangle, leaving a considerable height of the ridge at the furrow bottom. 4. The dihedral angle was similar range of $30-85^{\circ}$ for the all bodies investigated, but the directional angle was somewhat different from each other. The difference in directional angle was $5^{\circ}$ for the plow, $20^{\circ}$ for the Jaenggi A and $30^{\circ}$ for the Jaenggi B. 5. Area of the spherical representation region was 0.0328 for the plow, 0.1194 for the Jaenggi A and 0.1716 for the Jaenggi B. This may indicate that the plow came close to a working surface and the Jaenggi A and the Jaenggi B departed from a working surface to a somewhat greater extent.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.1
• /
• pp.30-38
• /
• 2018

This study was conducted to explore the effects of seeding rate of a seed mixture on grassland productivity and botanical composition. Seeding rates were composed of four different treatments varying by the amount of seed: T1, 50% decrease in seeding rate from standard; T2, standard seeding rate; T3, 50% increase in seeding rate from standard; and T4, 100% increase in seeding rate from standard. In 2016, seasonal changes in grass botanical composition revealed T2, T3, and T4 in portion of grass ratio were the highest with a range of 87-100%, whereas T1 was the lowest of all treatments. In 2017, the botanical composition in T1 showed that the grass ratio in of the first cutting was 91%, but in the fourth cutting its ratio decreased by 75%. The results from both years were combined for each treatment, T4 ($11,435kg\;ha^{-1}$) and T3 ($11,162kg\;ha^{-1}$) demonstrated the highest dry matter yield of the treatments (T1: $8,196kg\;ha^{-1}$; T2: $9,521kg\;ha^{-1}$) (p<0.05). As a result, a 50-100% increase in the seeding rate from the standard demonstrated the best grassland yield and botanical composition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.144.2-144.2
• /
• 2016

Diamond-like carbon (DLC) coatings have been widely applied to the mechanical components, cutting tools due to properties of high hardness and wear resistance. Among them, hydrogenated amorphous carbon (a-C:H) coatings are well-known for their low friction properties, stable production of thin and thick film, they were reported to be easily worn away under high temperature. Non-hydrogenated tetrahedral amorphous carbon (ta-C) is an ideal for industrial applicability due to good thermal stability from high $sp^3$-bonding fraction ranging from 70 to 80 %. However, the large compressive stress of ta-C coating limits to apply thick ta-C coating. In this study, the thick ta-C coating was deposited onto Inconel alloy disk by the FCVA technique. The thickness of the ta-C coating was about $3.5{\mu}m$. The tribological behaviors of ta-C coated disks sliding against $Si_3N_4$ balls were examined under elevated temperature divided into 23, 100, 200 and $300^{\circ}C$. The range of temperature was setting up until peel off observed. The experimental results showed that the friction coefficient was decreased from 0.14 to 0.05 with increasing temperature up to $200^{\circ}C$. At $300^{\circ}C$, the friction coefficient was dramatically increased over 5,000 cycles and then delaminated. These phenomenon was summarized two kinds of reasons: (1) Thermal degradation and (2) graphitization of ta-C coating. At first, the reason of thermal degradation was demonstrated by wear rate calculation. The wear rate of ta-C coatings showed an increasing trend with elevated temperature. For investigation of relationship between hardness and graphitization, thick ta-C coatings(2, 3 and $5{\mu}m$) were additionally deposited. As the thickness of ta-C coating was increased, hardness decreased from 58 to 49 GPa, which means that graphitization was accelerated. Therefore, now we are trying to increase $sp^3$ fraction of ta-C coating and control the coating parameters for thermal stability of thick ta-C at high temperatures.