Jorge A. Gurlekian;Benoit Jacques;Miguelina Guirao
Proceedings of the KSPS conference
/
1996.10a
/
pp.521-528
/
1996
This presentation explores on the perceptual characteristics of the lateral sound /l/ in CV syllables. At initial position we found that /l/ has well marked formant transitions. Then several questions arise: 1) are these formant structures dependent on the following vowel\ulcorner. 2) Are the formant transitions giving an additional cue for the identification\ulcorner Considering that the French vocalic system presents a greater variety of vowels than Spanish, several experiments were designed to verify to what extent a more extensive range of vocalic timbres contribute to the perception of /l/. Natural emissions of /l/ produced in Argentine Spanish and Canadian French CV syllables were recorded, where V was successively /i, e, a, o, u/ for Spanish and /i, e, $\varepsilon$, a, $\alpha$, o, u, y, \phi$/ for French. For each item, the segment C was maintained and V was replaced by cutting & splicing by each of the remaining vowels without transitions. Results of the identification tests for Spanish show that natural /l/ segments with low Fl and high formants F3, F4 can be clearly identified in the /i, e, u/ vowel contexts without transitions. For French subjects the combination of /l/ with a vowel without transitions reflected correct identifications for its own original vowel context in /e, $\varepsilon$, y, $\phi$/. For both languages, in all these combinations, F1 values remained rather steady along the syllable. In the case of /o, u/ very likely the F2 difference lead to a variety of perceptions of the original /l/. For example in Ilul, French subjects reported some identifications of /l/ as a vowel, mainly /y/. Our observations reinforce the importance of F1 as a relevant cue for /l/, and the incidence of the relative distance between formants frequencies of both components.
Background: Cancer is a leading cause of death worldwide. A large proportion of cancer deaths are preventable through early detection but there are a range of social, emotional, cultural and financial dimensions that hinder the effectiveness of cancer prevention and treatment efforts. Cancer stigma is one such barrier and is increasingly recognized as an important factor influencing health awareness and promotion, and hence, disease prevention and control. The impact and extent of stigma on the cancer early detection and care continuum is poorly understood in India. Objectives: To evaluate cancer awareness and stigma from multiple stakeholder perspectives in North India, including men and women from the general population, health care professionals and educators, and cancer survivors. Materials and Methods: A qualitative study was conducted with in-depth interviews (IDIs) and focus group discussions (FGDs) among 39 individuals over a period of 3 months in 2014. Three groups of participants were chosen purposively - 1) men and women who attended cancer screening camps held by the Indian Cancer Society, Delhi; 2) health care providers and 3) cancer survivors. Results: Most participants were unaware of what cancers are in general, their causes and ways of prevention. Attitudes of families towards cancer patients were observed to be positive and caring. Nevertheless, stigma and its impact emerged as a cross cutting theme across all groups. Cost of treatment, lack of awarenes and beliefs in alternate medicines were identified as some of the major barriers to seeking care. Conclusions: This study suggests a need for spreading awareness, knowledge about cancers and assessing associated impact among the people. Also Future research is recommended to help eradicate stigma from the society and reduce cancer-related stigma in the Indian context.
A passive microfluidic delivery system using hydrophobic valving and pneumatic control was devised for microfluidic handling on a chip. The microfluidic metering, cutting, transport, and merging of two liquids on the chip were correctly performed. The error range of the accuracy of microfluid metering was below 4% on a 20 nL scale, which showed that microfluid was easily manipulated with the desired volume on a chip. For a study of the feasibility of biochemical reactions on the chip, a single enzymatic reaction, such as ${\beta}-galactosidase$ reaction, was performed. The detection limit of the substrate, i.e. fluorescein $di-{\beta}-galactopyranoside$ (FDG) of the ${\beta}-galactosidase$ (6.7 fM), was about 76 pM. Additionally, multiple biochemical reactions such as in vitro protein synthesis of enhanced green fluorescence protein (EGFP) were successfully demonstrated at the nanoliter scale, which suggests that our microfluidic chip can be applied not only to miniaturization of various biochemical reactions, but also to development of the microfluidic biochemical reaction system requiring a precise nano-scale control.
This study set out to investigate the effects of 16-week nutrition education and exercise intervention run by a public health center on the physical activities and dietary patterns of obese children at the before, after, and after one month point. After the program, the obese index of the obese children dropped by 5.9% from 38.4% to 32.5%. One month after the end of the program, their obese index increased by 1.4% to 33.9% (p < 0.001). The obese children's hours of walking of physical activities increased to 2.6 hours from 1.2 hours after the program and remained at the 2.6 hours range one month after the end of the program (p < 0.01). The total scores of their food habits increased to 10.4 points from 9.1 points after the program and 10.3 points one month after the end of the program with significant differences (p < 0.01). The total scores of their eating behavior made a significant increase to 6.5 points from 5.3 points after the program and then dropped to 5.9 points one month after the end of the program (p < 0.05). As for changes to their dietary pattern scores according to the obese index, only the food habits scores showed significant main effects of term (p < 0.05). According to these results, there is still a need to develop proper programs to help them increase regular exercise, improve their physical activities by cutting down time with TV, computer, Internet, and video games, and enhance their nutritional knowledge and to provide them with ongoing management and guidance until the improved food habits and eating behavior become part of their habits.
The Incidence of groin injury was about 10% in football player These injuries occur most commonly in athletes participating in sports Involving cutting, quick accelerations and decelerations and sudden directional changes. Symptoms may range from intermittent episodes of mild discomfort to severe and chronic career-ending pain. Groin injuries may result from a variety of causes. We must keep in mind that many other conditions may also affect the groin. Because of the anatomy of the region is so complex. Ligament/muscle strains, nerve entrapment syndromes, sportsman's hernia, symphysitis, stress fractures and various hip pathologies are reviewed as causes of groin pain are reviewed as common causes of groin pain.
Transactions of the Korean Society of Mechanical Engineers B
/
v.25
no.12
/
pp.1702-1710
/
2001
Supersonic coaxial jets are investigated numerically by using the axisymmetric, Wavier-Stokes equations which are solved using a fully implicit finite volume method. Three different kinds of coaxial nozzles are employed to understand the flow physics involved in the supersonic coaxial jets. Two convergent-divergent supersonic nozzles are designed to have the same Mach number 2.0, and used to compare the coaxial jet flows with those discharging from one constant-area nozzle. The impingement angle of the annular jets are varied. The primary pressure ratio is changed in the range from 2.0 to 10.0 and the assistant jet ratio from 1.0 to 3.0. The results obtained show that the fluctuations of the total pressure and Mach number along the jet axis are much higher in the constant-area nozzle than those in the convergent-divergent nozzles, and the constant-area nozzle lead to higher total pressure losses, compared with the convergent-divergent nozzles. The assistant jets from the annular nozzle affect the coaxial jet flows within the distance less than about ten times the nozzle throat diameter, but beyond it the coaxial jet is conical with self-similar velocity profiles. Increasing both the primary jet pressure ratio and the assistant jet pressure ratio produces a longer coaxial jet core.
The study was carried out to examine in more detail metallurgical and mechanical properties of brazed joints of diamond cutting wheel. In this work, shank(mild steel) and sintered bronze-base tips were brazed with three different filler materials(W-40, BAgl and BAg3S). The machine used in this work was a high frequency induction brazing equipment. The joint thickness, porosities and microstructure of brazed joints with brazing variables(brazing temperature, holding time) were evaluated with OLM, SEM, EDS and XRD. Bending(torque) test was also performed to evaluate strength of brazed joints. Further wetting test was performed in a vacuum furnace in order to evaluate the wettability of filler metals on base metals9shank and tips). The brazing temperature had a strong influence on the joint strength and the optimum brazing temperature range was about $700~850^{\circ}C$ for the bronze/steel combinations. The strength of the brazed joint was found to be influenced by the three factors : degree of reaction region, porosity content, joint thickness. The reaction region was formed in the bronze-base tip adjacent to the joint. The reaction region resulted in a bad influence on the strength due to the formation of Cu5.6Sn, CuZn4, $\beta(CuZn)$ and CdAg, etc. Porosities increased as brazing variables(brazing temperature, holding time) increased, and the brazed joints with porosities of less than about 3-5% had an optimum strength for the bronze-base tip.
Journal of The Korean Society of Grassland and Forage Science
/
v.14
no.4
/
pp.324-330
/
1994
The objective of this study is to obtain the basic data for investigating the potentiality of continuous utili~ation (first cutting in the late fall and regrowth yield in next spring) of forage rape seeded in fall. Fresh yield and the content of nitrogenous compound in leaves and roots were measured during a growth period. Fresh yield accumulation was very low between the late fall(470kg/10a) and the early regrowth period( 1.070kg /IOa). Total nitrogen content in leaves until the wintering period was decreased from 4.71% to 3.70%. while that in roots slightly increased during this period. The highest content(4.84%) in roots was observed in the early regrowth period, and then rapidly decreased as growth advanced. Protein-N was the largest pool of nitrogenous compound in leaves and roots through entire growth period, Its content in leaves decreased until the wintering period (Feb. 4), and then increased until the bolting stage(Apr. 10). Protein-N in roots highly accumulated from the late fall(11.1mg/gDM) to the early regrowth period(l6.9mg/gDM), and then decreased until the early tlowering stage. The content of amino acid-N in leaves showed a little change with a range from 5.7 to 8.5mgIgDM during entire growth period, while that in roots rapidly decreased from early regrowth period. The content of $NO_3$-N decreased from 7.0 to 4.3mglgDM in leaves, while increased from 0.9 to 2.3mg/gDM in roots from the late fall to the wintering period. 7he content of $NH_4$-N was lower and less varillble than other nitrogen compound during entire growth period. The results clearly showed that protein-N was the main storage form and highly accumulated in roots of overwintering forage rape.
The effects of moisture content and particle size of rice flour on the physical properties of the extrudate were examined by using a autogeneous single screw extruder. The moisture contents tested were in the range of 17-28% and the particle sizes were 18-60mesh and 60-120mesh. Samples were taken at different temperatures from the start-up period to the steady state operation. The expansion ratio increased and bulk density decreased as the moisture content and particle size of the flour decreased. The cutting force decreased and the air cell size became uniform as the moisture content and particle size of the flour decreased. As the moisture content increased, the yellowness of the extrudate powder decreased, while the lightness increased, the apparent viscosity increased and the water soluble index decreased. Gelatinization and partial dextrinization were apparent during the extrusion process, and the degree of dextrinization was appeared to be influenced by the levels of moisture content and particle size of rice flour.
Proceedings of the Korean Society for Noise and Vibration Engineering Conference
/
2003.05a
/
pp.319-324
/
2003
In general industrial rotating machinery is operated under 3,600 rpm as rotating speed and designed to have critical speed that is above operating speed. So, there was no problem to operate rotating machine under critical speed. But nowadays, they should be operated more than the frist critical speed as usual with the trend of high speed, large scale and hish precision in industries. In case of the large rotor assembly as the trend of large scale, using fitting method of disk or cylinder on shaft is rising for the convenience of assembly and cutting down of manufacturing cost. The shrink fitting is used to assemble lamination part on shaft for manufacturing of rotor of motor or generator in many cases and also is widely used for other machinery. In rotating system, which is compose of rotor and bearing, the critical speed is determined from inertia and stiffness for the rotor and bearings. In case of fitting assembly, analysis and design of the rotor is not easy because the rotor stiffness is determined depend on a lot of factors such as shaft material/dimension, disk material/dimension and assembled interference etc. Therefore designer who makes a plan for hish-speed rotating machine should design that the critical speed is located out of operating range, as dangerous factors exist in it. In order to appropriate design, an accurate estimation of stiffness and damping is very important. The stiffness variation depend on fitting interference is a factor that changes critical speed and if it's possible to estimate it, that Is very useful to design rotor-bearing system. In this paper, the natural frequency variation of the rotor depends on fitting interference between basic shaft and cylinder is examined by experimentation. From the result, their correlation is evaluated quantitatively using numerical analysis that is introduced equivalent diameter end the calculation criteria is presented for designer who design fitting assembly to apply with ease for determination of appropriate interference.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.