• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.77-77
• /
• 2017

Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.

• Ocean and Polar Research
• /
• 제32권4호
• /
• pp.337-350
• /
• 2010

This study conducted sedimentological and geophysical surveys for 3 years (2006-2008) in southern Gyeonggi Bay, Korea to elucidate temporal changes in subaqueous dune morphology on a sand ridge trending northeast to southwest that has been excavated by marine sand mining. The sand ridge (~20 m in height, ~2 km in width and 3~4 km in length) has a steep slope on the NW side and a gentle slope on the SE side, creating an asymmetric profile. Large (10~100 m in length) and very large (>100 m in length) dunes occurring on the SE side of the ridge show a northeastward asymmetrical shape, whereas dunes on the NW side destroyed by marine sand mining display a southwestward asymmetry. The comparison between Flemming (1988)'s correlation and the height-length correlation of this study indicates that tidal current and availability of sand sediment are major controlling factors to the development and maintenance of dunes. Depth and sedimentary characteristics (grain size) are not likely to be major controlling factors, but indirectly influence dune growth by hydrological and sedimentary processes. The length and the height of dunes decrease toward the southeastern trough away from the crest of the ridge. These features result from the decrease of tidal current and sediment availability. The length and the height of dunes on the southeast side decrease gradually over time. This is a result of the interaction between tidal current and the decrease in sediment availability due to sediment extraction by marine sand mining. Marine sand mining has destroyed the dunes directly, causing irregular shapes of shorter length and lower height. The coarse fraction of suspended sediments is transported and deposited very close to the sand pit. By contrast, relatively fine sediments are transported by the tidal current and deposited over a wide range by the settling-lag effect, resulting in a decrease of sediment grain size in the area where suspended sediments are deposited. In addition, marine sand mining, decreases the height of dunes. Therefore, morphological and sedimentological characteristics of dunes around the sand pits will be significantly changed by future sand mining activities.

• Journal of Community Nutrition
• /
• 제4권3호
• /
• pp.151-158
• /
• 2002

The purpose of this study was to investigate the correlations among the anthropometry, serum lipid levels and nutrient intake in Korean female university students. The subjects were 119 female students at a university located in Incheon. This study was conducted using a self-administered questionnaire. Anthropometric data were measured and blood lipid levels were analyzed. Nutrient intake collected from 3 day-recalls was analyzed by the Computer Aided Nutritional Analysis Program. The data were analyzed by SPSS 10.0 program. Average age, height and weight of the subjects were 20.9 years, 160.1cm and 54.3kg, respectively. Average serum TG (triglyceride), total cholesterol, HDL-C (high density lipoprotein-cholesterol) and LDL-C (low density lipoprotein-cholesterol) levels of the subjects were 69.47mg/dl, 146.85 mg/dl, 50.49mg/dl and 82.52mg/dl, respectively. Average AI (atherogenic index) of the subjects was 2.03, which was in the normal range based on risk values. Average intake of most nutrients except protein, vitamin B$_1$, vitamin C and phosphorus were lower than the Korean RDA. Especially calcium and iron intakes of the subjects were under 65% of the Korean RDA. Serum TG, total cholesterol and LDL-C levels were negatively correlated with DBP (diastolic blood pressure). HDL-C/LDL-C and HDL-C/total cholesterol were positively correlated with height. Age was positively correlated with phosphorus intake. DBP of the subjects was positively correlated with calcium and iron intakes. Serum TG level was positively correlated with total cholesterol, HDL-C, LDL-C and AI, while negatively correlated with HDL-C/total cholesterol. Total cholesterol level was positively correlated with HDL-C, LDL-C and AI, while negatively correlated with HDL-C/LDL-C, HDL-C/total cholesterol. HDL-C level was positively correlated with LDL-C, HDL-C/LDL-C and HDL-C/total cholesterol, while negatively correlated with AI. LDL-C level was negatively correlated with HDL-C/LDL-C and HDL-C/total cholesterol, while positively correlated with AI HDL-C/LDL-C ratio was positively correlated with HDL-C/total cholesterol and AI. HDL-C/total cholesterol was negatively correlated with AI. Fat intake was positively correlated with total cholesterol, HDL-C level, and vitamin B$_2$ intake was positively correlated with TG, HDL-C/LDL-C. Therefore, nutrition education is necessary for female university students to promote the lipid profile and to optimize the nutritional status. (J Community Nutrition 4(3) : 151∼158, 2002)

• 한국해양학회지
• /
• 제3권1호
• /
• pp.16-25
• /
• 1968

천연하천수는 다면적인 용도를 지니는 귀중한 천연자원이다. 선진국가에서의 예를 들지않드라도 우리의 사회생활이 발전함에 따라 물의 용도는 너무나 다양하게 요구되는 것이며, 이로 인한 수많은 오염요소는 물과 그 속의 천연자원을 파괴하는 현상이 현저하게 나타나게 된다. 천연자원은 그 자체가 지니고 있는 속성을 충분히 활용하면서 효과적으로 이용해야 할것이고 또 그 자원은 항구적인 보존책이 강구되어야 할 것이다. 우리나라에도 적지않은 하천수계가 있으나 그 활용은 아직은 미미한 상태에 있다. 하천수를 포함한 내수면의 수산업적이용도 그 중의 중요한 부분을 차지하는 것이니, 각하천수계의 어업생물학적조사, 수질조사를 비롯하여 식용어, 유어자원 또는 유용생물자원의 함양은 시급하게 착수되어야 할 중요한 과제라고 하겠다.

• 대한미생물학회지
• /
• 제21권1호
• /
• pp.1-16
• /
• 1986

Fifty-one strains of Pseudomonas aeruginosa were isolated from various clinical specimens. Among them, 26 (51%) strains were gentamicin-resistant (Gm') and 25 (49%) were susceptible to gentamicin (Gm'). The frequencies of resistant strains to piperacillin (Pi), cefotaxime, moxalactam, cefoperazone (Cz), and amikacin (Ak) ranged from 21.6 to 31.4%, and $MIC_{50}$ of these drugs were lower than the critical concentrations of susceptibility and resistance. Thirty (58.8%) strains were multiply resistant to 12 or more drugs. All Gm' strains were multiply resistant to 12 or more drugs and one was resistant to all 18 drugs tested, while only four Gm' strains were multiply resistant to 12 drugs and the multiplicity of resistance of the other Gm' strains were less than 10 drugs. Resistance to Gm appeared to have a significant correlation with the resistance to tobramycin (Tb), Ak, Pi, and Cz. All Gm' strains were resistant to Tb and about 38.4 to 46.1% of them were resistant to Ak, Pi, and Cz. The incorporation of $Ca^{++}$ and $Mg^{++}$ ions in Mueller-Hinton agar (MHA) did not influence the MICs of Gm, Tb, carbenicillin (Cb), Pi, and Cz as compared with the results obtained in MHA without these ions. Gm strains were studied on the combined effect of beta-lactam antibiotics and aminoglycosides by the methods of checkerboard and modified paper strip diffusion. Most Gm' strains showed significant synergistic effects by the FIC index between Ak and three beta-lactam antibiotics; Cb, Pi, and Cz, but these results did not in agreement the results obtained through the method of modified paper strip diffusion test. In order to know the nature of the drug resistance of P. aernginosa, the plasmid profile analysis was studied. Agarose gel electrophoresis of lysates processed by the method of Kado and Liu showed one or more plasmids in 22 (43.1%) strains. A group of 19 strains showed at least one band of plasmid and three strains two bands. The range of the molecular weight of plasmids was 3.8 to 243 Mdal. All strains carrying large plasmids larger than 200 Mdal were isolated from wound specimens. Three Gm' strains also harboured the plasm ids of 13 to 203 Mdal.

• 분석과학
• /
• 제12권3호
• /
• pp.190-195
• /
• 1999

Testosterone cypionate (750 mg) 주사제를 말에 투여한 후 testosterone의 대사과정을 살펴보았다. 채취한 뇨에서의 추출물은 효소와 산에 의해 가수분해한 후 oxime-t-butyldimethylsilyl(oxime-TBDMS)의 형태로 유도체화하여 gas chromatography/mass spectrometry(GC/MS)로 분석하였다. Testosterone의 체내 대사과정에서 생성되는 주요 대사체인 $5{\alpha}$-androstan-$3{\beta}$, $17{\alpha}$-diol, $5{\alpha}$-androstan-$3{\beta}$, $17{\beta}$-diol 그리고 $5{\alpha}$-androstan-$3{\beta}$-ol-17-one과 testosterone 및 DHEA의 구조는 표준물질과 질량스펙트럼을 비교하여 확인하였으며, 그들의 배설정도를 GC/MS의 selected ion monitoring (SIM) 방법으로 동시 분석하였다. 그 결과 본 실험방법에서 얻은 검정곡선은 정량 범위 내에서 직선성(r>0.984)을 나타내었고, 회수율은 86.3~94.7% 이었으며, 검출한계는 1~3 ppb 이었다. Testosterone의 배설정도는 주사제 투여 후 5일째 최고 농도에 이른 후 서서히 감소하였다. DHEA와 testosterone 및 그 대사체들의 비는 경주마 약물검사에서 testosterone의 투여 여부를 판단할 수 있는 방법으로 매우 유용함을 알 수 있었다.

• 대한약침학회지
• /
• 제21권2호
• /
• pp.76-81
• /
• 2018

Objective: This study compared the safety and efficacy of $Safacto^{(R)}$ versus $xyntha^{(R)}$ in patients with severe hemophilia A. Methods: Thirty-three male patients with severe hemophilia A were randomly divided into two groups. Seventeen patients received $Safacto^{(R)}$ and 16 patients received $Xyntha^{(R)}$ for four consecutive times. The dosage of FVIII was 40-50 IU/kg for each injection. Plasma level of FVIII activity was evaluated before every injection, 15 minutes after the injection and one month after the start of the trial. The rate of factor VIII activity, pain and joint motion were also assessed before and after the treatment. Results: Plasma level of FVIII clotting activity in $Safacto^{(R)}$ and $Xyntha^{(R)}$ were $1.96{\pm}0.5IU/dl$ and $1.63{\pm}0.5IU/dl$ and increased to $88.84{\pm}25.2IU/dl$ and $100.09{\pm}17.8IU/dl$, respectively (P<0.001). Pain score and range of motion improvement were $9.3{\pm}0.9$ and $8.7{\pm}0.1$ in $Safacto^{(R)}$ (P=0.17); and $9.4{\pm}0.8$ and $8.8{\pm}0.3$ in $Xyntha^{(R)}$ (P=0.35), respectively. No allergic or other unfavorable reactions was observed with either of the preparations. Conclusion: This study showed that $Safacto^{(R)}$ has a favorable efficacy and safety profile.

• Korean Chemical Engineering Research
• /
• 제52권1호
• /
• pp.81-87
• /
• 2014

고체가 연속적으로 주입되고 배출되는 상온 상압 2단 기포 유동층(내경 0.1 m, 높이1.2 m)의 흐름특성을 조사하고, 운전유속범위를 고찰하였다. 고체는 상부 기포 유동층으로 주입되고, 넘쳐서 기계적 혹은 비기계적 밸브가 없이 단순히 농후상 고체 층으로 이루어진 고체 수송관(standpipe, 내경 0.025 m)를 통하여 하부 기포 유동층의 층으로 주입되며, 하부 유동층을 넘쳐서 고체가 배출되었다. 기체는 하부 유동층을 유동화하고 배출된 후 다시 상부 유동층을 유동화하였다. 기체로는 공기를 사용하였고, 고체로는 입도가 큰 입자(< $1000{\mu}m$, 겉보기 밀도 $3090kg/m^3$)와 입도가 작은 입자(< $100{\mu}m$, 겉보기 밀도 $4400kg/m^3$)를 혼합한 입자를 사용하였으며, 혼합비를 변수로 하였다. 하부 유동층 기체가 고체수송관의 고체흐름을 비우고, 우회하는 조건일 때 하부 유동층 유동화 속도를 붕괴속도로 정의하였다. 본 공정의 운전이 가능한 최대기체유속으로 붕괴속도가 사용될 수 있었다. 붕괴속도는 작은 입자 혼합비가 증가함에 따라 증가하여, 30%에서 가장 큰 값을 나타낸 후, 감소하였다. 붕괴속도의 경향은 고체수송관 상단과 하단 사이의 압력차 경향과 유사하였다. 붕괴속도는 벌크밀도(bulk density)와 정체층 공극률의 함수로 나타내졌으며, 벌크밀도가 증가하면 증가하고, 정체층 공극률이 증가하면 감소하였다.

• 해양환경안전학회지
• /
• 제13권1호
• /
• pp.1-7
• /
• 2007

동해의 해양 심층수 자원 기반 환경 연구의 일부로 청결기술을 적용하여 해수 중의 용존 미량금속(Cd, Co, Cu, Ni, Pb, Zn) 농도 분포와 변화를 조사하였다. 강원과 경북 지역에 총 6개 정점을 선정하고, 각 지역마다 최대 채수 수심 각각 200-300m와 500m까지 시료를 채취하였다. 본 연구의 미량금속을 위한 연안해수 표준물질(CASS-4)의 분석 결과 각 원소 평균 회수율은 Co의 89.4%에서 Cd의 99.8%의 범위였다. 용존 미량원소의 분포는 해역 및 시기적인 변화가 다양하게 나타났다. Cd, Ni, Zn의 경우는 영양염 의존형으로 표층에서 낮고 저층으로 갈수록 증가하는 경향이 뚜렷하였다. 그러나 Co, Cu, Pb은 수직적으로 불규칙적인 분포를 나타내었다. 본 연구의 동해 심층수 원수의 중금속 농도는 해역별 수질 기준과 먹는 물 기준을 만족하였다.

• 한국식품저장유통학회지
• /
• 제21권5호
• /
• pp.688-693
• /
• 2014

영양성과 기능성이 개선된 두부의 제조 조건을 확립하고 자 시판 응고제($MgCl_2$)와 해양 암반 심층수를 각각 응고제로 사용하고 흑마늘 추출물을 0, 1, 3, 5, 7%씩 첨가하여 제조한 두부의 품질특성을 비교분석하였다. 관능평가 결과 전체적인 선호도는 해양 암반 심층수를 응고제로 사용하고 흑마늘 추출물이 첨가되지 않은 두부, 해양 암반 심층수를 응고제로 사용하고 흑마늘 추출물을 1% 첨가한 두부, 시판 응고제를 사용하고 흑마늘 추출물을 1% 첨가한 두부 순으로 높았으며 두부 제조 시 흑마늘 추출물의 첨가는 색, 향과 맛에 영향을 미쳤으며 흑마늘 추출물의 첨가량이 증가할수록 두부의 질감이 단단해지는 경향을 나타내었다. 두부의 제조 수율은 시판 응고제를 사용하고 흑마늘 추출물을 7% 첨가한 두부에서 26.66%로 가장 높았으나 타 실험군들과의 유의적인 차이는 없었다. 순물의 탁도는 시판 응고제를 사용한 두부에 비해 해양 암반 심층수를 응고제로 사용한 두부에서 유의적으로 낮았으며 흑마늘 추출물의 첨가량이 증가할수록 높았다. 두부의 pH는 5.61~6.15의 범위로 흑마늘 추출물의 첨가량이 증가할수록 감소하는 경향을 보였다. 색도에서 흑마늘 추출물의 첨가량이 증가할수록 두부의 명도는 낮아졌고 녹색도는 높아졌으며 황색도는 유의적인 차이를 보이지 않았다. 흑마늘 추출물의 첨가량 증가는 두부의 물성 중 경도, 씹힘성, 검성을 증가시키는 반면 탄력성에는 영향을 미치지 않았다. 이상의 결과를 종합하여 볼 때 시판 응고제 보다는 해양 암반 심층수의 사용하고, 1% 정도의 흑마늘 추출물을 첨가함으로써 두부의 관능적 특성과 물성을 개선할 수 있을 것으로 기대 된다.