• 제목/요약/키워드: Random signal

검색결과 713건 처리시간 0.029초

재방송 재밍 환경에서 BOC(pn,n) GNSS 변조된 신호를 위한 CP-ARC 기법 (A Combined Pseudo-random Noise Signal Based Advanced Region Correlation Scheme for BOC(pn,n) Modulated GNSS Signals in Repeat-back Jamming Environment)

  • 유승수;염동진;지규인;김선용
    • 제어로봇시스템학회논문지
    • /
    • 제22권11호
    • /
    • pp.977-983
    • /
    • 2016
  • This paper proposes a novel code-tracking scheme to track the fine code synchronization for BOC (pn,n)-modulated global navigation satellite system signals in a repeat-back jamming environment. The correlation function of BOC (pn,n)-modulated signals has several peaks. The correlation function in the advanced offset region remains almost unchanged due to the repeat-back signals being received later than a line-of-sight signal in the same multipath signal receiving case. Additionally, the combined pseudo-random noise signal can be treated as repeat-back jamming signals, like multipath signals. In this paper, we propose a novel code-tracking scheme utilizing the advantages of using a combined pseudo-random noise signal in the advanced offset region and verify its performance through simulation.

통합의사잡음 신호를 사용한 GNSS의 재방송재밍 검출기법 (A Novel Repeat-back Jamming Detection Scheme for GNSS using a Combined Pseudo Random Noise Signal)

  • 유승수;염동진;지규인;김선용
    • 제어로봇시스템학회논문지
    • /
    • 제20권9호
    • /
    • pp.977-983
    • /
    • 2014
  • A repeat-back jamming signal is an intentionally re-broadcasted GNSS (Global Navigation Satellite System) interference. In this paper, a novel repeat-back jamming detection scheme is proposed. The proposed scheme uses a combined pseudo random noise signal (C-PRN) and is available for a generic GNSS receiver with a single antenna. The C-PRN signal is made by combining several received pseudo random noise signals that had been transmitted from the visible GNSS satellites. Through a Monte-Carlo simulation, the detection probability of a repeat-back jamming signal detected with the proposed scheme is presented.

Random Telegraph Signal에 의한 1/f 잡음이 CMOS Ring Oscillator의 Phase Noise와 Jitter에 미치는 영향 (The effect of 1/f Noise Caused by Random Telegraph Signals on The Phase Noise and The Jitter of CMOS Ring Oscillator)

  • 박세훈;박세현;이정환;노석호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2004년도 춘계종합학술대회
    • /
    • pp.682-684
    • /
    • 2004
  • Random Telegraph Signal(RTS)에 의한 1/f 잡음이 CMOS Ring Oscillator의 Phase Noise와 Jitter에 미치는 영향을 조사한다. 7단 Ring Oscillator의 각 노드에 병렬 연결된 10개의 Piece-Wise-Linear 전류원이 RTS 신호를 모델링 한다. RTS 전류원의 진폭과 Time Constant를 변화시키면서 Ring Oscillator 출력의 FFT 및 전력 스팩트럼 밀도, Jitter를 관찰한다. RTS 전류원의 진폭은 Phase Noise의 폭을 증가시키고 결과적으로 Jitter의 크기도 증가 시키는 것이 확인 되었다. 그리고 RTS Time Constant가 짧아질수록 출력 신호의 FFT peak의 폭이 커지고 Cycle to Cycle Jitter 값이 증가하였다.

  • PDF

상관관계법에 의한 제어계통의 동 특성연구 ( 1 )-의 불규칙 2진신호에 의한 푸로쎄스의 동특성 상관측정 (Correlation Measurement of Process Dynamic Characteristics by Pseudo-Random Binary Singnals)

  • 한만춘;최경삼;박장춘
    • 전기의세계
    • /
    • 제19권6호
    • /
    • pp.1-7
    • /
    • 1970
  • In this paper, to determine process dynamic characteristics, the correlation method for measuring the impulse response of process using a pseudo-random binary signal as the test signal instead of white noise was studied. The error caused by using the signal of Mesquence signal generator which was built up by the authors was analysed. Experments were performed on the 1st and 2nd order lag systems and the results were in good coincidence with theoretical values. It is expected that applying these results, it may be possible to develop a continuous measuring method adaptable to modern control systems.

  • PDF

신호처리(I)-수학기초.Covariance로서 나타난 한 신호의 특질 (Signal Processing(I)-Mathematical Basis and Characterization of Signals by Covariance Functions)

  • 안수길
    • 대한전자공학회논문지
    • /
    • 제16권6호
    • /
    • pp.1-10
    • /
    • 1979
  • 과학의 발달에 따라 원거리의, 그리고 더욱 접근하기 어려운 곳에서 일어나는 현상을 다루게 됨에 따라 약한 신호까지 취급하기를 원하게 되었다. 편재하고 있는 noise 속에 찾기 어려운 정도의 약한 신호를 다루게 됨에따라 random process를 취급할 줄 알아야 하게 되었고 금래 급격히 발달하고 있는 신호처리기술을 위해서는 이와 관련된 분야가 차지하는 상호위치를 파악하기가 어렵게 되었다. 신호처리의 입장에서 이러한 관련성과 본질의 재파악을 꾀하여 보았다. 이글은 우선 수학과 random 과정 분석의 기초에 한정되겠다.

  • PDF

랜덤시퀀스와 Hadamard 행렬을 이용한 디지털 정보은폐 기술에 관한 연구 (A Study on Digital Information Hiding Technique using Random Sequence and Hadamard Matrix)

  • 김장환;김규태;김은수
    • 한국통신학회논문지
    • /
    • 제24권9A호
    • /
    • pp.1339-1345
    • /
    • 1999
  • 본 논문에서는 랜덤시퀀스와 Hadamard 행렬을 이용하여 다중 정보를 은폐시킬 수 있는 새로운 디지털 제안하였다. 기존의 디지털 정보은폐에 사용된 기법은 하나의 랜덤시퀀스를 정보신호에 직접 곱하여 정보신호에 에너지 레벨을 매우 낮춤으로서 불법 이용자로 하여금 은폐된 정보의 검출이나 교란을 어렵게 하였다. 그러나 여러 개의 정보를 동일한 디지털 영상에 은폐시킬 경우에는 직교성이 보장되는 은폐코드를 사용해야 하기 때문에 어느 정도 상관성을 갖는 랜덤시퀀스만으로는 정보은폐가 어렵다. 따라서, 본 논문에서는 랜덤시퀀스의 장점과 더불어 직교성을 갖을 수 있도록 같은 행렬을 곱할 때만 정확한 신호로 추출되는 Hadamard 행렬을 랜덤시퀀스와 함께 사용하여 다수의 은폐정보에 대해서도 정확하게 은폐된 신호를 추출할 수 있는 새로운 디지털 정보은폐 방법을 제안하였다.

  • PDF

A SOLUTION OF THE ORNSTEIN-UHLENBECK EQUATION

  • MOON BYUNG SOO;THOMPSON RUSSEL C.
    • Journal of applied mathematics & informatics
    • /
    • 제20권1_2호
    • /
    • pp.445-454
    • /
    • 2006
  • We describe a solution to the Ornstein-Uhlenbeck equation $\frac{dI}{dt}-\frac{1}{\tau}$I(t)=cV(t) where V(t) is a constant multiple of a Gaussian white noise. Our solution is based on a discrete set of Gaussian white noise obtained by taking sample points from a sum of single frequency harmonics that have random amplitudes, random frequencies, and random phases. Hence, it is different from the solution by the standard random walk using random numbers generated by the Box-Mueller algorithm. We prove that the power of the signal has the additive property, from which we derive that the Lyapunov characteristic exponent for our solution is positive. This compares with the solution by other methods where the noise is kept to be in an error range so that its Lyapunov exponent is negative.

인지 무선 통신 환경에서 임의접속 기법의 전송 효율 분석 (Performance Evaluation of Random Access in Cognitive Radios)

  • 왕한호;유화선;우중재
    • 융합신호처리학회논문지
    • /
    • 제13권3호
    • /
    • pp.156-161
    • /
    • 2012
  • 임의 접속(random access) 프로토콜은 기본적으로 센싱 기능을 가지고 있으며, 이것을 이용하여 분산형 무선 네트워크 시스템 구축에 적합한 특징을 가지고 있다. 이러한 기술적 특징은 중앙식 제어(centralized control)가 어려운 이기종 시스템들이 동작하는 인지 무선 통신 환경에 대하여 장점을 가지며, 인지 무선 통신 환경에서 임의 접속의 성능을 검증해 보아야 한다는 동기를 제공한다. 이 논문에서 우리는 인지 무선 통신 환경에서 CSMA/CA(carrier-sensing multiple access with collision avoidance)기법을 도입하고, 성능을 분석하는 기본 틀을 제공한다.

QMF를 이용한 영상 양자화오차 (Quantization Error of Image Signal by Using QMF)

  • 오영훈;권락범;박남천
    • 융합신호처리학회 학술대회논문집
    • /
    • 한국신호처리시스템학회 2000년도 추계종합학술대회논문집
    • /
    • pp.85-88
    • /
    • 2000
  • Signal splitting and perfect reconstruction in subband coding is based on the assumption that quantization errors are negligible. But if subband signal is quantized, 4 types of errors occurs thus it is not impossible to do perfect reconstruction. These errors are QMF design error, aliasing error, signal error and random error. By using the QMF for subband splitting, the QMF error does not present. and by using the Lloyd-Max quantizer for the quantization and by using an appropriate synthesis filter, all signal dependent errors can be cancelled and the remaining error is random error which is uncorrelated with the original image〔1〕. In this thesis, Lenna and Camera-Man image are devided into 10 subbands by using the D4 and D20 wavelet And the subband signals are quantized by using the Lloyd-Max quantizer and the quantization errors are compared. and evaluated.

  • PDF

Design and Implementation of True Random Noise Radar System

  • Min, Woo-Ki;Kim, Cheol-Hoo;Lukin, Constantin A.;Kim, Jeong-Phill
    • Journal of electromagnetic engineering and science
    • /
    • 제9권3호
    • /
    • pp.130-140
    • /
    • 2009
  • The design theory and experimental results of a true random noise radar system are presented in this paper. Target range information can be extracted precisely by correlation processing between the delayed reference and the signal received from a target, and the velocity information by the Doppler processing with successive correlation data. A K-band noise radar system was designed using random FM noise signal, and the characteristics of the fabricated system were examined with laboratory and outdoor experiments. A C-band random FM noise signal was generated by applying a low-frequency white Gaussian noise source to VCO(Voltage Controlled Oscillator), and a K-band Tx noise signal with 100 MHz bandwidth was obtained by using a following frequency multiplier. Two modified wave-guide horn arrays were designed and fabricated, and used for the Tx and Rx antennas. The required amount of Tx/Rx isolation was attained by using a coupling cancellation circuit as well as keeping them apart with predetermined spacing. A double down-conversion scheme was used in the Rx and reference channels, respectively, for easy post processing such as correlation and Doppler processing. The implemented noise radar performance was examined with a moving bicycle and a very high-speed target with a velocity of 150 m/s. The results extracted by the Matlab simulation using the logging data were found to be in a reasonable agreement with the expected results.