• Advances in aircraft and spacecraft science
• /
• 제6권6호
• /
• pp.497-513
• /
• 2019

A wind tunnel test was conducted that measured surface fluctuating pressures aft of a ramp at transonic speeds. Dynamic pressure test data was used to perform a study to determine best locations for streamwise sensor pairs for shocked and unshocked runs based on minimizing the error in root-mean-square acceleration response of the panel. For unshocked conditions, the upstream sensor is best placed at least 6.5 ramp heights downstream of the ramp, and the downstream sensor should be within 2 ramp heights from the upstream sensor. For shocked conditions, the upstream sensor should be between 1 and 7 ramp heights downstream of the shock, with the downstream sensor 2 to 3 ramp heights of the upstream sensor. The shock was found to prevent the passage coherent flow structures; therefore, it may be desired to use the shock to define the boundary of subzones for the purpose of loads definition. These recommendations should be generally applicable to a range of expansion corner geometries in transonic flow provided similar flow structures exist. The recommendations for shocked runs is more limited, relying on data from a single dataset with the shock located near the forward end of the region of interest.

• International Journal of Reliability and Applications
• /
• 제18권2호
• /
• pp.21-44
• /
• 2017

Accelerated life tests (ALTs) are frequently used in manufacturing industries to evaluate the reliability of products within a reasonable amount of time and cost. Test units are subjected to elevated stresses which yield quick failures. Most of the previous works on designing ALT plans are focused on tests that involve a single stress. Many times more than one stress factor influence the product's functioning. This paper deals with the design of optimum modified ramp-stress ALT plan for Burr type XII distribution with Type-I censoring under two stress factors, viz., voltage and switching rate each at two levels- low and high. It is assumed that usage time to failure is power law function of switching rate, and voltage increases linearly with time according to modified ramp-stress scheme. The cumulative exposure model is used to incorporate the effect of changing stresses. The optimum plan is devised using D-optimality criterion wherein the ${\log}_{10}$ of the determinant of Fisher information matrix is maximized. The method developed has been explained using a numerical example and sensitivity carried out.

• 대한산업공학회지
• /
• 제22권3호
• /
• pp.459-471
• /
• 1996

This paper considers ramp tests for exponential lifetime distribution when there are limitations on test stress and test time. The inverse power law and a cumulative exposure model are assumed. Maximum likelihood (ML) estimators of model parameters and their asymptotic covariance matrix are obtained. The optimum ramp test plans are also found which minimize the asymptotic variance of the ML estimator of the log mean life at design constant stress. For selected values of the design parameters, tables useful for finding optimal test plans are given. The effect of the pre-estimates of design parameters is studied.

• International Journal of Reliability and Applications
• /
• 제18권2호
• /
• pp.45-63
• /
• 2017

In this paper, we have formulated optimum Accelerated Life Test (ALT) plan for a parallel system with two independent components using masked data with ramp-stress loading scheme and Type-I censoring. Consider a system of two independent and non-identical components connected in parallel. Such a system fails whenever all of its components has failed. The exact component that causes the system to fail is often unknown due to cost and time constraint. For each parallel system at test, we observe its system's failure time and a set of component that includes the component actually causing the system to fail. The stress-life relationship is modelled using inverse power law, and cumulative exposure model is assumed to model the effect of changing stress. The optimal plan consists in finding out the optimum stress rate using D-optimality criterion. The method developed has been explained using a numerical example and sensitivity analysis carried out.

• 대한교통학회지
• /
• 제26권5호
• /
• pp.17-28
• /
• 2008

본 연구에서는 지금까지 소개된 램프업 분석기법을 정리하고, 각 방법론의 장 단점 및 적용사례를 제시한 후, 향후 교통수요분석에 대한 적용방안을 살펴보았다. 사례분석은 2002년 말 개통된 천안${\sim}$논산 고속도로 통행실적 자료를 이용하였으며 자료적용 시 월/계절 변동성을 제거하였다. 분석결과 월별 수요변동율을 이용한 F-Test를 제외하면 다른 모든 기법에서 램프업 기간이 9개월${\sim}$12개월로 분석되었다. 또한 램프업 폭을 분석한 결과 개통초기(개통 후 1개월)에는 실적치가 예상치의 $65%{\sim}72%$수준으로 상당히 낮게 나타났으며, 기간이 경과함에 따라 점차 안정화 수준으로 회복하는 것으로 나타났다. 향후 램프업 현상을 수요분석에 적용하기 위한 표준적인 램프업 분석기법의 정립뿐만 아니라, 실적 자료를 이용한 노선별 특성이 고려된 램프업 효과분석 관련 연구가 지속적으로 이루어진다면, 초기교통수요에 대한 이해의 폭을 넓힐 수 있을 뿐만 아니라, 신뢰성 있는 수요분석이 이루어질 것으로 판단된다.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.23-28
• /
• 2014

Commercial vehicle ESC assessment for curvature road was conducted. The previous study of ESC activation condition for losing controllability utilizing the test protocols of double lane change and sine with dwell method was conducted without considering the geometric complexity of roadway design. Since critical rollover accidents were frequently observed in the exit ramp zone, variety of curve, slope and bank have been added for analysis conditions. Detailed feature of the ramp including location, dimension and design characteristics have been analyzed from the typical trumpet type ramp design. Analyzing accident data from 2008, two specific ramps have been selected due to their complexity in design and severity in steering operation.

• 대한물리의학회지
• /
• 제12권2호
• /
• pp.53-57
• /
• 2017

PURPOSE: The purpose of study was to clear up the environmental risk factor that can be easily occurred unstability of hip during gait and one leg standing at various ramp angle. METHODS: Twenties healthy males of 69 subjects is participated in this study. Participants was measured activation on gluteus medius muscle during both conditions (walk across the ramp and one leg stand in the transverse direction) of seven different angle. The measured data were analyzed using one-way ANOVA to investigate the effect of muscle activation on the each condition. The statistical analyses were performed using SPSS ver. 18.0 and p-value less than .05 were considered significant for all cases. A post-hoc test was performed by Bonferoni method. RESULTS: The study showed that more muscle activities on gluteus medius is increased by increasing the ramp angle. Post-hoc analysis demonstrated that the peak and mean of muscle activity increased significantly with a ramp angle of $15^{\circ}$ and $25^{\circ}$ during gait and one-leg stand. CONCLUSION: According to the study results, impaired balance can be easily occurred when cross walk and one-leg stand on a ramp from higher than $15^{\circ}$, and highest risk was angle of $25^{\circ}$ or more. As a people with gluteus medius muscle weakness walks a ramp, the ramp angle has a cross relationship with the impaired balance. If people with gluteus medius weakness walk on the more than $10^{\circ}$ of ramp angle, they will need a lot of attention for prevent impaired balance.

• Tribology and Lubricants
• /
• 제24권2호
• /
• pp.77-81
• /
• 2008

In this work, ramp loading scratch method was used to evaluate the scratch characteristics of HDD media and ZnO thin films. Commercially available HDD media and ZnO thin films grown on silicon(100) substrate by sol-gel method were used. As for the ZnO films, the effects of annealing temperature after the film deposition process were also investigated. A custom built scratch tester was used to scratch the specimen under a ramp loading condition. The scratch track formed by ramp loading was measured by optical microscope and Atomic Force Microscopy (AFM). The wear depth and width were used to assess the scratch characteristics of the HDD Media and ZnO thin films. The results showed that ZnO film annealed at $800^{\circ}C$ had the best scratch resistance property. Also, the HDD media showed overall better scratch resistance than the ZnO films.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.111-118
• /
• 2014

PURPOSES : This study performs fundamental research on ramp-metering design criteria. METHODS : We carefully review previous studies in terms of ramp-metering design criteria and then consider applicability in Korea. For this, traffic simulation model is employed to analyze actual effect according to specific location of stop-line when implementing ramp-metering. RESULTS : When a stop-line moving forward with a 50m interval, travel speed at mainline relative to current stop-line location tends to decrease. However, traveling speed at approach roads increase about 5~18% under the same condition. When a stop-line location moving backward with a 50m interval, mainline travel speed increase approximately 17~32% whereas traveling speed at approach roads decrease. All cases are compared with the current stop-line location. CONCLUSIONS : We believe that both cases are useful with respect to freeway management. For example, moving forward a stop-line case can be used management for queuing area at ramp section and approach roads. Moving backward a stop-line case can be used for traffic control, focusing on mainline of freeways.

• PNF and Movement
• /
• 제15권3호
• /
• pp.253-257
• /
• 2017

Purpose: This study was conducted to predict the risks that arise while standing on mediolateral ramps at various ramp angles by identifying the ratio of medial to lateral gastrocnemius muscle activities. Methods: The subjects were 20 healthy adult men. Seven mediolateral ramp angles ($0^{\circ}$, $2^{\circ}$, $5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $20^{\circ}$, and $25^{\circ}$) were applied for the experiment. The ratio of medial to lateral gastrocnemius muscle activities in each condition was measured using electromyography, and the measured data were converted to root mean square values to calculate the activity ratios. Results: The study results showed statistically significant differences in the ratio of mediolateral gastrocnemius muscle activities according to the selected mediolateral ramp angles. The results of a post hoc test confirmed that the multifidus muscles were asymmetrically used on the two sides at mediolateral ramp angles of $5^{\circ}$ or higher. Conclusion: This study found that an asymmetric use of the multifidus muscles began at a mediolateral ramp angle of $5^{\circ}$, and the provision of propulsion using the ankle joints on mediolateral ramps at $5^{\circ}$ or steeper was maneuvered differently from that on flat ground. This suggests that individuals with balance control disorder have the risk of falling due to ankle sprains and unstable balance control. Therefore, patients and elderly people are required to exercise caution when crossing $5^{\circ}$ or steeper ramps.