• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.165-170
• /
• 2000

A fundamental experimental study for a substitute proposal to super-speed craft propulsion system called underwater ram-jet propulsion by high pressure air ejection as driving force was investigated. for basic study of effect of ram-jet propulsion performances ismple underwater ram-jet flow field was established and PIV(Particle Image Velocimetry) method was adopted to analyse the jet-induced flow appearing at ram intake mixing chamber and nozzle. Some flow dynamics relating to the high-speed ejector effect were discussed for the basic understanding for the ram-jet propulsion principle.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권3호
• /
• pp.36-42
• /
• 2000

A fundamental experimental study for an alternative proposal to super-speed craft propulsion system called underwater ram-jet propulsion by high pressure air ejection as driving force was investigated. For basic study of the effects of ram-jet propulsion performance, a simple underwater ram-jet flow field was established and PIV(Particle Image Velocimetry) method was adopted to analyse the jet-induced flow appearing at ram intake, mixing chamber and nozzle. Some flow dynamics relating to the high-speed ram-jet effect were discussed for the basic understanding of the its propulsion principle.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.437-438
• /
• 2008

가스터빈 및 램제트의 효율 향상 및 허용수명과 안정성 확보를 위해서는 고온부품에 대한 효과적인 냉각기술개발이 필수적이다. 냉각시스템을 설계하기 위해서는 다양한 냉각방식에 대한 기초적인 연구뿐만 아니라, 이에 대한 이해를 기반으로 실제 조건에 대한 치밀한 해석이 필요하다. 실험 및 해석 결과를 토대로 열적 응력 및 예상 수명을 예측 할 수 있다. 이와 같은 일련의 설계 작업을 열설계 기술이라 하며, 열설계 기술은 가스터빈 및 램제트의 성능 향상은 물론 독자적인 설계 및 개발을 위해 필요한 핵심 요소설계기술 중 하나이다.

• 대한수학회지
• /
• 제48권2호
• /
• pp.341-365
• /
• 2011

In this paper, we establish general stratawise higher jet evaluation transversality of J-holomorphic curves for a generic choice of almost complex structures J (tame to a given symplectic manifold (M, $\omega$)). Using this transversality result, we prove that there exists a subset $\cal{J}^{ram}_{\omega}\;{\subset}\;\cal{J}_{\omega}$ of second category such that for every $J\;{\in}\;\cal{J}^{ram}_{\omega}$, the dimension of the moduli space of (somewhere injective) J-holomorphic curves with a given ramication prole goes down by 2n or 2(n - 1) depending on whether the ramication degree goes up by one or a new ramication point is created. We also derive that for each $J\;{\in}\;\cal{J}^{ram}_{\omega}$ there are only a finite number of ramication profiles of J-holomorphic curves in a given homology class $\beta\;{\in}\;H_2$(M; $\mathbb{Z}$) and provide an explicit upper bound on the number of ramication proles in terms of $c_1(\beta)$ and the genus g of the domain surface.

• 대한조선학회논문집
• /
• 제34권4호
• /
• pp.42-52
• /
• 1997

수중램제트(underwater ram-jet)는 램흡입부(ram intake), 혼합실(mixing chamber) 및 노즐(nozzle)로 구성되어 있으며, 램흡입부로 유입된 작동유체는 압력이 증가되며 이 증압된 작동유체에 혼합실로부터 고압공기를 분사하여 기 액이상류를 형성하여 노즐을 통과하면서 대기압까지 팽창을 하여 작동유체를 고속으로 가속시켜 노즐출구로부터 추력을 얻는 방식으로 차세대 초고속 선박추진장치이다. 본 연구에서는 80노트를 낼 수 있는 선내관통형(buried type vessel) 램제트의 최적 노즐형상데이터를 이용하여 제반변수(벽마찰계수, 가스속도, 기포반경, 대기온도, 질량유량비, 디퓨저면적비, 작동유체의 속도구배)의 변화가 추진특성에 미치는 영향을 파악하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.2019-2026
• /
• 2003

Spray and combustion characteristics of a dump-type ram-combustor equipped with a V-gutter flame holder were experimentally investigated. Spray penetrations with a change in airstream velocity, air stream temperature, and dynamic pressure ratio were measured to clarify the spray characteristics of a liquid jet injected into the subsonic vitiated airstream, which maintains a highly uniform velocity and temperature. An empirical equation was modified from Inamura's equation to compensate for experimental conditions. In the case of insufficient penetration, the flame in the ram-combustor was unstable, and vice versus in the case of sufficient penetration. When the flame holder was not equipped, the temperature at the center of the ram-combustor had a tendency to decrease due to the low penetration and insufficient mixing. Therefore, the temperature distribution was slanted to the low wall of the ram-combustor. These trends gradually disappeared as the length of the combustor became longer and the flame holder was equipped. Combustion efficiency increased when the length of the combustor was long and the flame holder was equipped. Especially, the effect of the flame holder was more dominant than that of the combustor length in light of combustion efficiency.

• 한국추진공학회지
• /
• 제14권6호
• /
• pp.9-16
• /
• 2010

고체연료 램제트 추진의 경우 간단한 구조에 비해 높은 성능과 추진력을 얻을 수 있는 매력적인 추진기관이다. 본 연구의 목적은 두가지 유형의(스파이크 & 피토) 흡입구에 대한 공기역학적 특성을 파악함에 있다. 마하수 3.0의 실험조건에서 연소실의 압력과 $0^{\circ}$와 $4^{\circ}$의 받음각의 변화에 따라 흡입구 벽면의 압력값을 측정하였다. 본 연구는 초음속 유동장치와 쉴리렌 시스템을 이용하여 수행되었으며 동일 실험조건에서 스파이크 형이 피토 형보다 약 2배 높은 전압력 회복율을 나타내었다. 전산유체 해석을 통하여 흡입구 내부흐름을 실험결과 값과 비교 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.751-754
• /
• 2002

The SFU(Solid Fuel Ram-Jet) propulsion is attractive for projectiles because of the combination of high propulsive performance and low system complexity more than conventional projectiles. The Objective of this research was to characterize the inlet aerodynamic characteristics (centerbody & pilot type) in SFRJ. Diffuser static pressure & combustion chamber pressure was tested and the AoA was changed $0^{\circ}\;and\;4^{\circ}$ at Mach number of 3.0 for performance estimate. The performance study of inlet was carried out with the Schlieren system and Supersonic cold-flow system. A Computational fluid dynamic solution is applied internal flow of inlet and the solutions are compared with experimental results.

• 한국분무공학회지
• /
• 제7권3호
• /
• pp.12-17
• /
• 2002

In this paper, spray and combustion characteristics of a liquid-fueled ramjet engine were experimentally investigated. The spray penetrations were measured to clarify the spray characteristics of a liguid jet injected transversely into the subsonic vitiated airstream, which is maintained a high velocity and temperature. The spray penetrations are increased with decreasing airstream velocity, increasing airstream temperature, and increasing air-fuel momentum ratio. To compensate our results of penetrations, the new experimental equation were modified from Inamura's equation. In the case of insufficient penetration, the combustion phenomenon in ram-combustor were unstable. Therefore, the temperature distribution was slanted to the low wall of the ram-combustor. These trends gradually disappeared as the length and air temperature of the combustor became longer. Combustion efficiency increased when the length of the combustor was long and the air temperature was high. Especially, stable flame region is enlarged when the length of the combustor was long and the air temperature was high. Type Abstract here. Type Abstract here.

• 한국전산유체공학회지
• /
• 제12권2호
• /
• pp.1-7
• /
• 2007

To develop an aerodynamic performance, two groups of studies have been achieved widely. One is about the geometric design of vehicles and the other is about aerodynamic devices. Geometric design is a credible and stable method. However, it is not flexible and each part is related interactively. Therefore, if one part of geometry is modified, the other part will be required to redesign. On the other hand, the flow control by aerodynamic devices is flexible and modulized method. Even though it needs some energy, a relatively small amount of input makes more advanced aerodynamic performance. Synthetic jet is one of the method in the second group. The device repeats suctions and blowing motions in constant frequency. According to the performance, the adjacent flow to flight surface are served momentum. This mechanism can reduce the aerodynamic loss of boundary layer and separated flow. A synthetic jet actuator has several parameters, which influences the flow control. This study focuses on the parameter effects of synthetic jet - orifice geometry, frequency, jet speed and etc.