• Journal of Integrative Natural Science
• /
• v.6 no.1
• /
• pp.12-15
• /
• 2013

To combine the micro rain radar and microwave radiometer cloud liquid water, we estimate the cloud physical thickness from the difference between the MTSAT-1R cloud top height and cloud base height of visual observation of Daegwallyeong weather station, and the cloud liquid water path of micro rain radar is obtained by multiplying the liquid water content of micro rain radar and the estimated cloud physical thickness. The trend of microwave radiometer liquid water path agrees with that of the micro rain radar during small precipitation. We study these characteristics of micro rain radar and microwave radiometer for small precipitation to obtain the combined cloud water content of micro rain radar and microwave radiometer, constantly operated regardless to the rainfall.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.E3
• /
• pp.87-94
• /
• 2005

Wet scavenging by rain drops is a most important removal process of air pollutants. In order to study the scavenging mechanisms of aerosol particles, the characteristics of chemical components in the rain water were examined as a function of the amount of rainfall. Rain water were collected continuously and separated into the soluble and insoluble components. The elemental concentrations in both components were determined by a PIXE analysis. The physical and chemical characteristics of atmospheric aerosols during the rainfall events were measured simultaneously. The elemental concentrations in rain water decreased substantially just after rain started and then gradually declined in subsequential rain fall exceeding 1.0 mm. The large particles were scavenged more easily than the fine particles. Fe, Ti and Si in rain water were in high insoluble state. Contrarily, almost whole of S was dissolved in rain water.

• The Korean Journal of Ecology
• /
• v.21 no.2
• /
• pp.117-124
• /
• 1998

To clarify the effects of acid precipitates on histological damage, water status, and growth of Pinus densiflora green house experiment applyin simulated acid rain was carried out. Contact angle of water droplet on needles of P. densiflora seedlings treated with simulated acid rain of different pHs simulated acid rain was, the more rapid transpiration was. Leaf water potential after water withdrawal was also reduced rapidly in proportion to acidity of simulated acid rain. Height growth of P. densiflora seedlings treated with simulated acid rain of pH 2 decreased, while growth of seedlings treated with that of pH 3 and 4 increased comparing with that treated with normal rain of pH 5.6. pH of cultivated soil in pH 2 plot was acidified with the amount of simulated acid rain applied but that in pH 3 and 4 plots did not show any directional change. From those results, it could be interpreted that decrease of height growth in pH 2 plot was originated from multiple effects of water deficit from rapid transpiration and soil acidification. On the other hand, increased of height growth in pH 3 and 4 plots would be originated from the supply of N and S included in simulated acid rain.

• Korean Journal of Plant Resources
• /
• v.12 no.1
• /
• pp.10-19
• /
• 1999

The water status of Pinus densiflora and P. koraiensis was observed after the treatment of simulated acid rain for every month August 1997 to March 1998. Both of the species showed increase of dry weight, water saturation deficit and epidermis transpiration after treatment of simulated acid rain (pH 3.5) for first three months. On the contrary, water content was decreased in both the species after three month of simulated acid rain treatment. The effect of simulated acid rain, however, became weaker after that and no big difference was observed after seven month of treatment. Water potential of the leaf of both species became lower than that of the control(pH 5.6) after seven month treatment of simulated acid rain. The cuticle layers of the epidermis and florins ring were damaged seriously and the size of the gap between stomata became bigger after the treatment of simulated acid rain.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.2
• /
• pp.159-165
• /
• 1996

In order to study the scavenging mechanism as a final goal, the characteristics of chemical components in the rain water were examined as a function of the amount of rainfall. The rain drops were collected sequentially with a rainfall interval amount of each 0.1 .sim. 0.5 mm from the beginning of rain. Rain water was separated into the soluble and insoluble components and the concentrations of 15 elements in both components were determined by the PIXE analysis. The elemental cencentrations decreased quickly till about 0.3 .sim. 0.5 mm of rainfall was obtained and then decreased gradually afterward. Fe, Ti, and Si in the aerosol particles caught in rain water were in high insoluble state. In contrast, almost whole of S and Cl were dissolved in rain water.

• Korean Journal of Plant Resources
• /
• v.13 no.2
• /
• pp.131-139
• /
• 2000

The effects of the simulated acid rain on the growth response and water status of Glycine soja was observed in 2 months-old seedlings. The seedlings were treated with acid rain(pH 3.5), three times per week. Glycine soja showed significant reduction in the total length, total weight, dry weight, water contents and top/root ratio after treatment of simulated acid rain(pH 3.5) for 56 days. The growth of shoot was more susceptible to acid rain than that of roots. On the contray, Number of lateral roots, water saturation deficit and epidermis transpiration was higher than that of control(pH 5.6) after 56 days treatment of simulated acid rain.

• Journal of environmental and Sanitary engineering
• /
• v.8 no.2
• /
• pp.155-168
• /
• 1993

The chemical components of rain water and aerosol in Bulkwang of Seoul and Yang-Paying of Kyunggi-do were compared in order to investigate that pollutants at urban area influences rain water and aerosol component. The following is the result of this study. 1) The pH of rain water was shown 4.82 at urban area and 5.69 at suburban area. 2) The mean concentration of $SO_4^{2-}$ within rain water at suburban was nearly the same at urban area but the mean concentration of $Na^{+},Ca^{2+},Mg^{2+}$ and $NH_4^{2+}$ at suburban area was higher than the corresponding levels at urban area. 3) The ion component of aerosol at suburban was shown 68% of that at urban area. This study proved that the concentration of rain water and aerosol component was under the influence of movement of air current.

• Korean Journal of Environmental Agriculture
• /
• v.10 no.1
• /
• pp.59-66
• /
• 1991

This study was carried out to investigate the chemical characteristics of the rain water in rural, urban and industrial areas which are located in Kyongbuk province, namely. Songju, Kumi, Kimchon, Yongdok and Teagu. The experiments were sampled the rain by amount of rain water from July to August in 1989, and analyzed the pH. EC, $SO_4\;^{2-}$, $NO_3^-$ and $Cl^-$ contents in the rain water. The results are summarized as follows : 1. The acid rain showed at the begining rain water of all surveyed sites, but there were difference by sites, and particulary severe in Kumi. 2. The content of $SO_4\;^{2-}$ in rain water was high in urban and industrial area, such as Teagu, Kumi and Kimchon. 3. According to the increasing rain water amount, the pH in rain water was high, and the contents of other components were low. This phenomenon remarkably presented at higher concentration of components and earlier rain water. 4. The electric conductivity was high significantly positive correlation with contents of $SO_4\;^{2-}$, $NO_3\;^-$ and $Cl^-$ in rain water, and pH was high significantly negative correlation with contents of $SO_4^{2-}$ and $NO_3\;^-$ in rain water, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2468-2473
• /
• 2005

Because the rain gauges of tipping bucket type can easily use the digital signal, the rain gauges are widely used for the meteorological observation. In general, the resolution of rain gauges of tipping bucket type can be categorized by the 0.1mm, 0.5mm, and 1.0mm classes. But, the error of the tipping bucket rain gauges is made by the intensity of rainfalls and is expected to make the standard calibration method for error measurement. Thus, we developed the hardware of standard calibration facility for rain gauges by weighting measurement method and proposed the standard procedure by rainfall intensity in this study Also, we calculated the error for the rainfall intensity and obtained useful result through the proposed calibration method.

• Wind and Structures
• /
• v.38 no.3
• /
• pp.171-191
• /
• 2024

Wind Driven Rain (WDR) poses a significant threat to the building environment, especially in hurricane prone regions by causing interior and content damage during tropical storms and hurricanes. The damage due to rain intrusion depends on the total amount of water that enters the building; however, owing to the use of inadequate empirical methods, the amount of water intrusion is difficult to estimate accurately. Hence, the need to achieve full-scale testing capable of realistically simulating rain intrusion is widely recognized. This paper presents results of a full-scale experimental simulation at the NHERI Wall of Wind Experimental Facility (WOW EF) aimed at obtaining realistic rain characteristics as experienced by structures during tropical storms and hurricanes. A full-scale simulation of rain in strong winds would allow testing WDR intrusion through typical building components. A study of rain intrusion through a sliding glass door is presented, which accounted for the effects of multiple wind directions, test durations and wind speeds; configurations with and without shuttering systems were also considered. The study showed that significant levels of water intrusion can occur during conditions well below current design levels. The knowledge gained through this work may enhance risk modeling pertaining to loss estimates due to WDR intrusion in buildings, and it may help quantify the potential reduction of losses due to the additional protection from shuttering systems on sliding glass doors during winds.