• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.166-174
• /
• 2015

A direct demand model requires relatively little analysis time and incurs a low cost. It is also known to be useful for the preliminary screening of promising configurations or concepts. This study reviews direct demand models of 12 existing urban railways using demographic data based on a block group level which is approximately 1/24 of a traditional zone area. However, direct demand models are limited. Therefore, a new approach is suggested. The proposed method is based on a field study and an empirical analysis. The study finds factors that affect ridership at the station level. As a case study, the proposed approach is tested using 54 light railway transit stations. The results of this empirical study demonstrate its applicability to improve the error rates of the predicted ridership at the station level.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.502-511
• /
• 2015

The purpose of this study is to prioritize the importance of urban railway service quality through statistical analysis. This was done to maximize customer satisfaction by providing customers of urban railway services (including LRT), operated by the local government, with a better customized service quality. It was hoped that this project would boost the need for public transportation by increasing customer satisfaction, which would eventually lead to more profitable revenue. The results of validity certification of expectations and perceptions before and after the use of government funded urban railway and private sector invested urban railways show that there are gaps for 18 items for the government funded urban rail projects (p<.01), while there is no significant difference for 2 items between expectation and perception (p>.05); private sector invested urban railway projects show differences for all 20 items (p<.001). Therefore, IPA analysis is conducted to improve the service quality; this should lead to a remedy that focuses on service quality. The findings of this study will contribute to providing management strategies for boosting customer satisfaction and creating revenue through customized service quality in the urban railway operating industry (including LRT), which is currently suffering from chronic deficits.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.117-126
• /
• 2015

The development of railway roadbed for 600km/h train speed level is very difficult because unpredictable static and dynamic interaction occurs between the ultra-high speed train and the infrastructure. Especially, an earthwork-bridge transition zone is a section in which influential factors react, such as bearing capacity, compression, settlement, drainage, and track irregularity; these interactions can include complicated dynamic interaction. Therefore, if static and dynamic stability are secured in transition zones, it is possible to develop roadbeds for ultra-high speed railways. In the present paper, design parameters for transition reinforcement applied to present railway design criteria are analytically examined for ultra-high speed usage on a preferential basis. Design parameters are the presence of reinforcing materials, geometric shape, stiffness of materials, and so on. Analysis is focused on the deformation response of the track and running stability at ultra-high speed.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.233-244
• /
• 2014

In this study, an analysis method for maglev train-guideway interaction is verified using field measurement data. The cabin and bogies of the maglev train are modeled as rigid bodies that are allowed to have heave and pitch motions. Levitation forces from the electromagnetic suspensions on the bogies are controlled using an active control algorithm. The guideway is represented using the Euler-Bernoulli beam. Considering rigorously the changes in air-gaps and material points at which the levitation forces are applied due to the pitch motions of the bogies, dynamic analysis of maglev train-guideway interaction is performed. Using field measurement data, obtained from the Incheon Airport Maglev Railway, the analysis method is verified. Accuracy of the analysis method is investigated. It is determined that the structures in the railway are designed and constructed safely according to the design code for maglev railways.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.85-92
• /
• 2013

An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. The main contributors to rolling noise are the sleepers, rail, and wheels. In order to analyze and predict rolling noise, it is necessary to understand the vibrating behaviors of railway tracks, as well as of the wheels. In the present paper, theoretical modeling methods for railway track are reviewed in terms of rolling noise; these methods are applied for the three representative types of domestic railway tracks operated: the conventional ballasted track, KTX ballasted track and KTX concrete track. The characteristics of waves propagating along rails are investigated and compared among the types of tracks. The tracks are modeled as discretely supported Timoshenko beams and are compared in terms of the averaged squared amplitude of velocity, which is directly related to the sound radiation from the rails.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.595-601
• /
• 2017

Due to the electrification of railways, fault at the traction line is increasing year by year. So importance of the fault locator is growing higher. Nevertheless at the field traction line, it is difficult to locate accurate fault point due to various conditions. In this paper railway feeding system current loop equation was simplified and generalized though measured data. And substation, train power data were measured under synchronized condition. Finally catenary impedance was predicted through generalized equation. Also simulation model was designed to figure out the effect of load current for train at same location. Train current was changed from min to max range and catenary impedance was compared at same location. Finally, power measurement was performed in the field at train and substation simultaneously and catenary system impedance was predicted and calculated. Through this method catenary impedance can be measured more easily and continuously compared to the past method.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.658-667
• /
• 2017

Rail is the main track component, playing the most important role in safe railways. For the sake of safety, it is strictly required to secure reliability against fatigue and destruction of rail. In this paper, by field measurement on concrete track, it is confirmed that the rail surface roughness and rail bending stress are linearly correlated with each other; the bending stress of rail can be presented as a function of train speed, track support stiffness, and rail surface roughness. The fatigue life of rail can be estimated by deriving the S-N curve through the fatigue test.

• Wind and Structures
• /
• v.22 no.2
• /
• pp.161-184
• /
• 2016

Long-span suspension bridges have evolved through the years and with them, the bridge girder decks improved as well, changing their shapes from standard box-deck girders to twin box and multi-box decks sections. The aerodynamic characteristics of the new generation of twin and multiple-decks are investigated nowadays, to provide the best design wind speeds and the optimum dimensions such bridges could achieve. The multi-box Megane bridge deck is one of the new generation bridge decks, consisting of two side decks for traffic lanes and two middle decks for railways, linked between them with connecting beams. Three-dimensional CFD simulations were performed by employing the Large Eddy Simulation (LES) algorithm with a standard Smagorinsky subgrid-scale model, for $Re=9.3{\times}10^7$ and angles of attack ${\alpha}=-4^{\circ}$, $-2^{\circ}$, $0^{\circ}$, $2^{\circ}$ and $4^{\circ}$. Also, a wind tunnel experiment was performed for a scaled model, 1:80 of the Megane bridge deck section, for $Re=5.1{\times}10^5$ and the aerodynamic static coefficients were found to be in good agreement with the results obtained from the CFD-LES model. However the aerodynamic coefficients determined individually, from the CFD-LES model, for each of the traffic and railway decks of the Megane bridge, varied significantly, especially for the downstream traffic deck. Also the pressure distribution and the effect of the spacing between the connecting beams, on the wind speed profiles showed a slight increase in turbulence above the downstream traffic and railway decks.

• International Journal of Railway
• /
• v.1 no.3
• /
• pp.83-88
• /
• 2008

Since the 1990's the fleet of the Dutch Railways showed a dramatic decrease in wheel tyre life. This lifetime reduction led to an unacceptable increase in life cycle costs. Therefore Lloyd's Register Rail has proposed to NedTrain to investigate the possibilities of improving the wheel tyre life. Three improvements were determined as most promising and relatively easy to achieve: - Profile optimisation for Rolling Contact Fatigue (RCF) reduction - a new wheel profile has been developed with a better resistance against rolling contact fatigue of the wheel tread. The profile has been implemented on single deck intercity trains and shows an increase in wheel tyre life of 30%. - Selection of improved wheel tyre materials - combining information from literature and experiences of manufacturers five alternative wheel tyre materials have been selected and are now being tested in practice. - Optimisation of the maintenance strategy - an alternative, preventative maintenance regime has been developed. With this Scraping regime, during short term maintenance every wheel is reprofiled. Higher mileages are reached and savings on life cycle costs up to 50% and more have been achieved. Unplanned maintenance goes down with $30{\sim}60%$. The results from field tests, using a reference group for comparison, and preliminary results after implementation show that the increase in wheel tyre life that is achieved with this project is significant. The results will continue to be monitored using the asset management tool 'Wheel Watch', that was specially developed for this project and is also described in this paper.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.433-442
• /
• 2014

This paper evaluates the performance of transit assignment algorithms for urban rail networks. The accuracy of the algorithms is essential not just for travel forecasting but also for the area of applications such as the assessment of road vulnerability and the fare adjustments between train operating companies. Nonetheless, the suitability and caveats for the series of computational steps have not yet been much discussed. This study thus considers the characteristics that are appropriate for investigating Seoul rail travelers using three representative transit assignment algorithms: the optimal strategy algorithm, route choice algorithms, and the Dial's algorithm. Both the theoretical foundation and the empirical performance are examined. The results demonstrate that the Dial's algorithm is superior in terms of the theoretical soundness and the computational efficiency.