• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.424-431
• /
• 2003

This report was studied about the advanced transit system for operating in oversea country and state of construction in the domestic. And we suggested the improvement policy against the major problems due to delay to operation and construction of advanced transit system in each cities of local self Government.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.300-306
• /
• 2002

To construct ligh rail transit, many local autonomous entities investigate the feasibility of project. Especially, many studies attempt to find the probability of private inducement and the method. The purpose of this paper is to develop the light rail transit financial analysis system for private sector, based on the procedure and the method of the financial analysis. This system consistes of the income and cost module. As a result, provide the cash flow, income statement and financial profit statement for the result. We hope that it is contributed to analyze the feasibility of the finance conveniently.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.915-923
• /
• 2011

Our country is promoting the introduction of new means of transportation due to insufficient supply according to the existing demand of road traffic. Among them, manless light railroad transit is settled down as the most definite alternative. However, new traffic systems such as manless light railroad have certain difference between characteristics of hardware and software and subway system. Therefore, there will be many differences compared to the existing contingency system when accidents occur. Railway management organization has to establish railway contingency plan and acquire permission from the minister of the Ministry of Land, Transport, and Maritime Affairs. However, as commercial transportation is available, a new traffic system also should establish contingency plan. Therefore, the establishment of systematic contingency plan is suggested in order to analyze characteristics of manless light railroad in the beginning of introduction and to make contingency response available.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.595-600
• /
• 2011

This study analyzed passenger's access modes that connect to regional railway station and developed a model of access mode choice based on transit smart card data of Seoul station as a case study. The study boundary includes sixteen bus stops around the station. The results show that most passengers access to station have less than two transfers. Of total 15000, eighty percent of passengers use metro and the rest of people take a bus. Interestingly, it is found that almost same proportions of passengers use metro and bus for egress the station. Consequently, metro is found to be most likely used mode compared to bus for both access and egress trips.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2539-2547
• /
• 2011

This paper will introduce the safety authorization system for light rail transit(LRT) through investigating safety certification & safety authorization in foreign country and aviation field in Korea. The safety authorization system proposed by the government these day was also investigated. Korea Transportation Safety Authority(KOTSA) have conducted safety validation process on Busan-Gimhae LRT before its revenue service during three months since Jan. of 2011. We describe the overview of these validation activities, results and safety certification issued. Learning from this process, we propose the standardized safety validation process including checklists which can be applied to common unmanned light rail system. This study will be a basis of railway safety authorization for LRT and will be continually improve its application ability by the future study.

• 한국철도학회논문집
• /
• 제5권4호
• /
• pp.267-275
• /
• 2002

The traction drive system for the urban transit maglev system is described in this paper. To control the magnitude and frequency of the output voltage of induction motor transiently, the vector control strategy is generally used. But in case of the traction drive system for the railway vehicle, it is difficult to use the vector control caused by the one-pulse mode in the high speed region. Therefore, this paper proposes the control strategy combined the vector control in the low speed region and the slip frequency control in the high speed region. And also, the overmodulation PWM method is discussed to make the change to the one-pulse mode softly. The performance of the proposed traction drive system is verified by the MATLAB simulation results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1233-1238
• /
• 2007

In recently, our social is entering to service infinite competitive time., So If companys don't give satifactory and an impression customers, they don't exist. The Companies that operate railway are promoted(Seoul metro). The Korail, Seol metropolitan Rapid Transit Corperation, Incheon Rapid Transit Corporation), they are into a stronger competitor. So the service for customer is more inportant to improve the image and administration than before. Especially, station workers who work near the customer are important for cooperation image. But, there are only a few employees to operate the station like ticketing in railway station, There aren't reinforcement the service employees and expanse the utility system. especially, since the transportation card is introduced in 1996, the customers who use the T-Money card are increased. So the change of service system is necessary to provide a substantial service to customer. This paper derives the problems through analysising the operating system of station, and presents the improvement to provide substantial services to customer

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2011-2014
• /
• 2008

A linear induction motor for urban railway transit is accompanied with the end-effect and large air-gap comparing with a rotary induction motor. These cause amount of difference between simulation results and experiments. In order to figure out the difference, experiments based on a real-scale test bed are indispensable, however building a test-line and a test vehicle is so difficult that authors are going to make a small-scale model and simulate it for comparison. In this paper, A rotary-type small-scale model of a linear induction motor is designed. Thrust and normal force of the model have been analyzed with the variation of frequency and speed by using a Finite Element Method(FEM).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.53-56
• /
• 2004

A light rail transit would be one of effective means to solve a traffic problem of the city. Noise and vibration originated from light railway, however, would be another problem. This study focuses on the method of decreasing noise and vibration for a light railway, and comprises track condition, driving condition, linear condition, vehicle condition and civil engineering structure condition. For decreasing noise and vibration in an track, long rail laying and low vibration track laying would be good methods. The result of this study proves that improving the track wold be the most economical and valid method for decreasing noise and vibration for light railway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.316-320
• /
• 2008

A light rail transit, using a linear induction motor, is generally composed with reaction plates along railroad track and the three phase primary on the vehicle. This linear induction motor is driven to keep clearance between the primary and the secondary of the ground for preventing any contact. Therefore efficiency and power factor is very low. In addition, the reaction plate installed on the ground throughout entire railway is impossible to keep uniform gap and it may cause system deterioration. In this paper, A rotary-type small-scale model of a linear induction motor for various characteristic analysis is designed. Thrust force, normal force and input current of the model by air-gap variation have been analyzed by using a Finite Element Method (FEM). The effects of air-gap variation on system performance have been considered by analysis results.