• 한국방재학회 논문집
• /
• 제3권2호
• /
• pp.111-118
• /
• 2003

건설중인 경부고속철도에서는 열차의 운행안전을 확보하기 위하여 다양한 안정시스템을 채택하고 있어 예기치 못한 재해발생으로 인한 인적 물적 피해의 최소화에 만전을 기하고 있으나, 국외규정이 도입되는 과정에서 국내 선로, 기후, 지형 지질학적 특성을 반영한 국내규정으로는 정립되어 있지 않은 현실이다. 따라서, 본 연구에서는 강우시 고속철도의 안전한 운행을 위해 현재 설정되어 운용 예정인 강우시 운전규제를 위한 경계우량의 문제점을 파악하고 보완함으로써 보다 합리적인 경계우량의 재설정이 가능하였다. 또한, 이를 이용하여 CTC 등의 중앙통제기구에서 정상운행 경계발령 열차속도규제 운전정지의 4단계로 강우상황에 따라 열차의 안전을 명확하게 확보할 수 있을 것이며, 자연재해 발생 최소화에 기여할 수 있을 것이라 판단된다.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1795-1804
• /
• 2014

Owing to the reduction in the peak power of a DC railway subsystem, many studies on energy storage system (ESS) applications have received attention. Each application focuses on improving the efficiency and addressing regulation issues by utilizing the huge regenerative energy generated by braking-phase vehicles. The ESS applications are widely divided into installation on a vehicle or in a substation, depending on the target system characteristics. As the main purpose of the ESS application is to reduce the peak power of starting-phase vehicles, an optimized ESS utilization can be achieved by the operating at the highest peak power section. However, the weight of an entire vehicle, including those of the passengers, continuously changes during operation; thus, considering the total power consumption and the discharging point is difficult. As a contribution to the various storage device algorithms, this study deals with ESS on board vehicles and introduces an ESS operating plan for peak-power reduction by investigating the weight of a train on a real-time basis. This process is performed using a train-performance simulator, and the simulation accuracy can be increased because the weight in each phase can be adopted in the simulation.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.983-988
• /
• 2009

본 논문에서는 고속전철 운행에 따라 인접 통신 선로에서 발생하는 유도전압을 국내 고시에 제시된 측정 회로에 따라 측정하고 유도전압의 특징을 분석하였다. 고속전철 선로와 2 km 병행하는 2개 루트의 시험용 통신선로를 구성하여 이격 거리, 병행 거리에 따른 유도전압을 측정 및 분석하고, 측정 회선 단말 접지 위치의 레일과의 거리에 따라 측정값에 대한 영향 여부를 검토하였다. 또한 1일간 시간에 따른 변화, 요일별 변화 등을 분석하였으며, 유도전압에 포함되어 있는 고조파 성분을 확인하였다. 이론과 같이 이격 거리에 따른 유도전압의 차이를 보였으며, 단말의 접지 위치는 측정값에 큰 영향을 주지 않음을 확인하였다. 또한 특정 시간대 및 특정 날짜에 상대적으로 큰 유도전압이 나타남을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.214-218
• /
• 2008

Because on the high-tension underground distribution line of an electric railway high voltage XLPE Cable two or three circuits between railway stations with a standard as receiving transformer facilities are established at a $30km{\sim}50km$ interval, reactive power in which the phase of a current is larger than that of a voltage is supplied when trains are not working, so when there are no loading or low loading as night. Due to the long-distance trend of the underground distribution system on an alternating current railway distribution line, the terminal voltage of a transformer is over the standard voltage, and after all, commercial cycle overvoltage is continued. To solve this problem, the shunt reactor is installed in middle of power distribution lines to maintain receiver voltage meted under the allowance regulation through control of the reactive power. Also, in case that the thickness of single cable is over $60mm^2$ and length of line is about over 30km, a circuit breaker is broken by shorting shunt ability of charging current in excess of shunt current(31.5A.rms). Therefore, this thesis presents installing the location of shunt reactor for quantitative analysis by using optimum algorism for compensation and control of the charging current.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권12호
• /
• pp.661-666
• /
• 2006

Interlocking signalling system plays key role as core system to manage railway operation. The core role of railway operation is to control routing, displaying signal and regulation for train. Interlocking system relate tightly to railway accident because collision and derailment is sometime taken place wrong route setting and signal displaying. Safety activity for interlocking system is inevitable to avoid the accident over its life cycle. The safety activity includes hazard identification and analysis, safety requirement allocation, safety plan, safety activity and ao on. The safety activity need a broad wide range work. In this paper, we concentrate on hazard identification for generic interlocking system and programmable electronic interlocking system and compare between two results. The hazards will be used for safety activity.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.196-201
• /
• 2006

Due to the damage which is caused by with the smoke, in the analysis statistics of a fire accident smoke is becoming the important evaluation index of fire quality. We must follow the procedures to use interior material for railway car as stated the Safety regulation for the urban railway car. In this study, we compared the Smoke Density of the train seat by test between Cone-Calorimeter and Smoke Density-Chamber. The results showed that the smoke density by test between Cone-Calorimeter and Smoke Density-Chamber is visible a similar tendency.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.231-237
• /
• 2006

Recently railroad industry pulls a new interest with stability, fixed time characteristic, low environment pollution characteristic and mass transportation characteristic. With industrial development railroad it joins in, The many research and regulation production are coming to do. Specially like this activities are coming to be advanced actively from North America and Europe. From viewpoint of railway car production company, The vehicle production that a suitable Europe standard is essentiality for find a Europe market that The whole vehicle consuming hold it does a most big specific gravity. From this study, developed finite element model for analysis technology about crashworthiness of inside GM/RT 2100 standard and analyzed crash results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2170-2172
• /
• 2003

This paper presents the position tracking control of an inverted pendulum on an inclined railway. In general, inclining the railway leads to errors in the pendulum angle even though the pendulum is stabilized, which results in errors in the cart position. To solve this problem, a linear quadratic regulation (LQR) controller with an integrator is used for compensating the resulting error in the cart position. The proposed method is evaluated by comparing LQR controllers with and without an integrator. Experimental results show that the LQR controller with an integrator is better in performance than one without an integrator.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.1030-1036
• /
• 2009

본 연구에서는 철도산업의 효율성을 측정하는데 있어 내부요인인 운영기관의 생산활동 뿐만 아니라 구조개혁으로 인한 조직유형, 사회경제적 관점에서 통제 불가능한 환경요인 등이 철도산업 효율성을 결정짓는데 어떠한 영향을 미치는지 분석하였다. 우리나라를 비롯하여 1990년 이후 구조개혁이 활발히 진행된 유럽국가와 일본을 대상으로, 철도산업 효율성 측정에 적합한 DEA방법을 이용하여 1990년~2006년까지의 효율성 값을 구하였다. 그 결과 우리나라는 모든 연도에 걸쳐 상대적으로 효율적으로 추정되었고, 전반적으로 평가대상국들의 효율성이 시간이 지남에 따라 향상되었음을 나타내었다. 또한 효율성 결정요인을 분석하고자 DEA방법으로 추정된 효율성 값을 종속변수로 하고, 구조개혁으로 인한 조직유형, 사회경제적 환경요인을 독립변수로 한 Tobit 분석에서는 시설과 운영을 분리하는 수직적 분리와 화물과 여객을 분리하는 수평적 분리가 효율성에 긍정적인 영향을 미치는 것으로 나타났다. 이는 철도산업의 경쟁력 강화와 경영효율성을 제고하기 위한 구조개혁은 그 과정과 결과에 대한 신중한 검토 및 평가가 이루어져야 함을 시사하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.604-609
• /
• 2003

The fire precautions regulation for Rolling stock in England, France and America concentrate on ensuring of safety in respect of material choosing method and consideration of design. In order to guarantee fire safety in Korean Rolling stocks, it is necessary to establish the fire precautions regulation at the two respects. Korean Standard of product classifies only incombustibility or not. It is not sufficient to classify various materials by testing method for incombustibility of material. Korean Standard to be reserved should be able to cover the smoke density test for small size and classification of the detail grade of material against the reaction to fire