• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1533-1539
• /
• 2007

It is mainly due to the toxic gases, produced from the material combustion, threatens human body in case of urban railway car like subway which passes through underground tunnel. In the field of railway industry, fire accidents was not frequent but occurs in each country and, the causes was investigated. The advanced country established the test standard (e.g., BS, EN) to measure the toxic gases quantitatively and, have applied to enhance the fire safety of railway car. We must also follow the procedures to use gangway material for railway car as stated the Safety regulation for the urban railway car. In this study, various gangway materials(silicon, synthtic rubber, soaltapulin) are used to investigate element of toxic gases when the fire occurs. The amount of toxic gases measured from the ISO 5659 chamber using cone heater was measured and compared the results for each materials.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1254-1260
• /
• 2005

The advanced country established the test standard (e.g., BS, EN) to measure the toxic gases quantitatively and, have applied to enhance the fire safety of railway car. We must also follow the procedures to use interior material for railway car as stated the Safety regulation for the urban railway car. Currently, various interior materials are used to obtain the fire safety of railway car. The amount of toxic gases moved into the FT-IR gas cell via sampling line from the ISO 5659 chamber using cone heater was measured and compared the results for each materials.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1533-1541
• /
• 2010

Multi-purpose freight car is applicable for both bulk freight and containerized freight to cope with the unbalance between demand and supply due to the demand variation by seasons or directions. In this paper, we suggested the advantages of introducing attachable container to railway freight transportation and possible freight items to use multi-purpose freight car. This results can be used to analyse the amount of attachable container and the feasibility of introducing multi-purpose freight car to railway.

• 대한인간공학회지
• /
• 제29권1호
• /
• pp.83-91
• /
• 2010

Recently study on passenger' activities found that many passengers were ride in kinds of transport, e.g. car and railway while business trip. Usually choice of transport is determined by the transportation of passengers, depending on the purpose of travel. A study was therefore set up to study how efficient influence the transports about business trip. The study involved 4 subjects (4m) which divided into four groups during two day. We evaluate about the transport productivity by each day by using the car and railway. The transport productivity of car and railway was valued in HRV and Stroop Color Word Interference Test. The results showed significant differences between the car and railway. The subjects reported that use of railway is greater transport productivity than the car.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.359-363
• /
• 2002

The coldproofness should be studied in order to operate the freight car by connecting the South and North Korea Railway. Actually, there is no standard for coldproofness in South Korea Railway, The standard for coldproofness of the Russian Railway, the Chiness Railway and the North Korea Railway was studied. From the analysis of these standards, the standard of coldproofness was proposed for the freight vehicle connecting the South and North Korean Railway.

• 한국철도학회논문집
• /
• 제6권3호
• /
• pp.149-155
• /
• 2003

The development of railway vehicles involves the proper selection of design parameters not only to achieve high speed but also to reduce the vibration of the train. In this study an analytical model of a freight car is developed to find the critical speed. The freight car can generate the snake motion of the lateral and yawing motion of the car body, the bogie, and the wheelset. Numerical analysis for the nonlinear equation motions with 17 degrees of freedom showed the running stability and critical speed due to the snake motion. Also, the vibration modes of the freight car was calculated using ADAMS/RAIL, which showed that the critical speed have the yawing modes of the car body and the bogie. Finally this paper shows that the snake motion of the vehicle can be controlled with the modifications of the design parameters.

• 한국철도학회논문집
• /
• 제17권5호
• /
• pp.381-389
• /
• 2014

본 연구에서는 카셰어링 이용특성자료 및 GIS를 활용하여 입지특성과 관련된 도시 및 지역적 사회경제에 대한 DB를 구축하였으며, 주성분분석을 통해 잠재변수를 도출하였고 요인점수를 활용한 다중회귀분석을 통해 영향변수의 의미를 살펴보았다. 업무중심지역 및 역세권지역, 대학교인근지역에서의 활용도가 높았고, 특히, 전기차에 대한 관심도가 카셰어링 이용도에 영향을 미치는 것으로 파악되었다. 한편, 금융기관이 집중된 지역 및 영업용(택시)차량 배치가 많은 지역에서는 이용이 제한되는 것으로 나타났다. 본 연구의 분석결과는 향후의 카셰어링의 활성화와 공유가치에 대한 시민의 이해도 향상과 소유에서 공유로의 발상전환에 기여할 것으로 판단된다.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.61-66
• /
• 2016

This paper presents the implementation for a network structure of railway cars using a point to point communication. Most of network's representative specifications for a train are the FIP (Field Bus), MVB (Multifunction Vehicle Bus), CAN and WTB (Wire Train Bus) which is used by ALSOM, SIEMENS and BOMBADIER as major in this field. These networks in a physical layer use a multi-drop method, connected from $1^{st}$ car to $n^{th}$ car of a train through a cable without any extra services such as an electric part, amplifier. However waveforms which is passed through a long cable in the multi-drop are distorted by a capacitance or resistance of the cable or environments. Also since using a cable connected directly from $1^{st}$ car to $n^{th}$ car, if over two trains make double head, it isn't easy to distinguish ID for each railway cars. So by using the point to point network per each car, it is able to reduce a distortion. Also since reducing distortion, this communication speed can be been higher and transmit and receive any packets more stably. Using proposed token in a packet, this can make ID per each railway car automatically. Finally experimental results show the good performance and effectiveness of the proposed method.

• 한국철도학회논문집
• /
• 제15권4호
• /
• pp.388-393
• /
• 2012

최근 철도역의 거점화, 벌크화물의 컨테이너 수송 등 철도물류의 효율화를 위한 다양한 시도가 이루어지고 있다. 이와 맞물려 철도수송시장에서 가장 큰 영역을 차지하고 있는 벌크시멘트 수송의 효율화를 위하여 2008년 4월부터 우리나라의 주요 7개 시멘트사가 사유화차로 보유하고 있는 벌크시멘트차를 공동으로 사용하고 있다. 당시 7개 시멘트사의 사유화차는 2,845량으로서 전체 벌크시멘트차의 75%에 해당하는 것이었다. 각각의 기업이 전용으로 사용하던 방식에서 공동사용 방식으로 전환함으로써 회귀일 단축, 물류비 절감 등의 효과를 기 대한 바 있다. 본 연구에서는 화차를 공동으로 사용한 지 약 3년이 경과한 시점에서 화차 운영실적 자료를 이용하여 공차 운행률의 변화와 시멘트 수송을 위한 화차의 준비시간 변화를 분석하여 공동사용에 따른 효과를 분석하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.234-241
• /
• 2002

In this study, a numerical method which assesses running stability of freight car loading 300m CWR and structural safety of conventional railway track when passing over curves and steel girder bridges is presented. Optimal speed of the freight car is suggest on the basis of numerical reviews for stability of derailment of the freight car and structural safety of track at weak points of the conventional line.