전차선로 상세설계는 평면도(pegging plan) 작업과 장주도 작업으로 분류될 수 있다. 평면도 작업은 선로 방향으로 전주의 위치, 편위, 장력길이 등을 결정하여 설계하는 것이고, 장주도 작업은 전주 위치에서 선로에 직각방향의 도면을 그리는 작업으로, 장주도에서는 전주, 기초, 가동브래킷, 전차선 및 조가선을 포함한 모든 선 등의 위치 및 크기 등을 확인할 수 있고, 장주별 사용된 자재를 표시한다. 본 연구에서는 입력조건 및 선로조건 등에 따라 기존선 180km/h급 전차선로의 장주도를 자동으로 설계할 수 있는 프로그램을 개발하였다. 그리고, 본 프로그램을 통하여 사용한 자재를 장주별 / 섹션별로 관리할 수 있고, 드로퍼 길이를 자동으로 계산할 수 있도록 하였다. 본 프로그램의 입력 및 계산은 C#을 이용하여 MS Excel 2007 기반의 친숙한 구조의 GUI를 개발하였으며, 장주도 출력에는 C#(ObjectARX)를 이용하여 개발하였다.
우리나라의 도시부철도(광역 및 도시철도)는 첨두시간대의 집중률이 매우 높은 편이다. 이 경우 도로 교통에서는 차량의 통행시간이 증가함에 따라 혼잡비용이 발생하지만, 운행시격이 정해져 있는 도시철도에서는 열차 내부의 승객 증가로 인해 승객의 신체적 정신적인 비효용(disutility)이 발생함에 따라 승객의 쾌적성이 감소하게 된다. 새로운 노선의 건설, 현재 노선의 보수 및 확장 등으로 인해 도시철도의 용량이 증가하여 승객의 쾌적성이 증가하는 경우 도로 철도 부문사업의 (예비)타당성조사 표준지침 수정 보완 연구(제4판)에서 제시하고 있는 편익 항목으로는 승객의 쾌적성 변화에 따른 편익을 산출할 수 없다. 이에 본 연구에서는 승객의 쾌적성에 영향을 미치는 요인들에 대해 살펴보고, 차량 내 혼잡 완화에 따른 승객의 편익을 산출하고자 한다. 설문조사를 통해 수집된 승객의 지불용의액(WTP) 자료를 이용해 Tobit 모형을 추정한 다음, 승객의 쾌적성 편익을 추정한다.
우리나라는 1899년 9월18일 경인선철도가 개통된 이래 일본은 청일전쟁의 수행을 통해 대륙으로의 물자수송의 필요성과 한반도의 지배를 위해 간선철도를 건설하기 시작하였다. 경부선은 1900년에 건설이 시작되어 1905년에 개통하게 되었다. 호남선은 1914년에 완공되었다. 우리나라사회는 철도의 개통으로 큰 변화를 겪었는데 새로운 노선을 통해 국토공간구조의 변화가 생겼으며 새로운 도시의 형성과 산업과 문화의 변화 등 새로운 현상이 나타났다. 본 연구에서는 향후 우리나라 철도부설과 그 사회경제적 영향력에 대한 연구의 기초연구로서 몇 가지 사례를 통하여 철도가 우리사회에 미친 영향력을 분석해 보고자 하였다. 본 연구에서는 도로에서 철도로 바뀐 우리나라의 교통망과 신흥도시인 대전의 변화, 그리고 수행여행으로 철도를 많이 이용한 사실을 경주역과 불국사 역의 사례를 통해 살펴보았다. 향후 우리나라에서 철도가 가져온 변화 연구를 통해 철도의 다양한 기능성에 대한 파악이 가능할 것이며, 향후 일본과의 비교 연구를 통해 식민지 시대의 철도의 특성을 구체적으로 파악할 수 있을 것으로 사료 된다.
본 논문은 철도차량분야에 적용할 소프트웨어 Escrow의 상세 적용 절차에 대하여 논의하고자 한다. 철도차량 발주자는 차량의 소프트웨어 포함 장치에 대한 하자보증 기간(warranty period) 이후의 소프트웨어 변경 및 유지보수성 확보를 위하여 소스코드, 핵심적인 기술 원천정보 등을 요구하고 있다. 한편, 소프트웨어 개발 업체는 소스코드 등이 업체의 지적 재산권에 해당하는 사안이기 때문에 시행청의 요구사항을 만족하기 어려운 실정이다. 그러므로, 주 계약자인 철도차량 제작자는 소프트웨어 개발자와 사용자 간의 다른 입장을 조율하기 위하여, 소프트웨어 Escrow 서비스 제도를 도입해야 할 필요성이 있다. 소프트웨어 Escrow는 소프트웨어 Escrow 패키지(소프트웨어 소스코드, 소프트웨어 개발 툴, 빌드 프로세스, 독점권을 가진 정보, 저작권 등)의 거래 시, Escrow 계약 문서에 대한 서명을 통한 Escrow 계약 조건을 상호 합의한 후 신뢰성 있는 제3의 기관에 관련 기술 자료 등을 예치해 두는 양자 간 상생협력을 위한 제도이다. 본 논문에서는 다음의 Escrow 진행 절차에 대한 상세 내역을 연구하고, 향후 프로젝트 적용 방안을 제안하고자 한다.
This paper handles, implementation of multiple access bidirectional serial communications protocol using two common DC power lines, whict are power supply and ground, connecting multiple devices. Communication between the host and the multiple clients are performed using unique packet data with device ID unique to each devices connected on the common power lines. Host initiates data communications by transmitting command packet to the designated client with the client's ID and the client responds by transmitting response packet to the host and in this way, multiple clients and host exchange the packet through the common power lines. The normal voltage of the power communication line maintains 24V corresponding to level 1 and the host drops the voltage to 12V on sending level 0 signal, also the clients normally keeps the line voltage to 24V use pull-down circuit to drop the voltage to 12V on sending level 1 signal. Power supply originates from the host, the host senses the voltage level of the power communication lines and when the clients activates pull down circuit to send level 0 signal and the voltage drops to 12V, the hosts switches power source from 24V to 12V. Also, when clients deactivate pull down circuit to send level 1 signal, the host senses the voltage increase and switches the power source from 12V to 24V. Experimental circuit is designed with one hosts and four clients and verified the power line voltage switching operation depending on the data signal levels on the power line. The proposed research result can be applied to two wire power communications system with one host and multiple low current consumption clients.
Cathodic protection(CP) is widely used as a means of protecting corrosion for not only marine structures like ship hulls and offshore drilling facilities, but also underground structures like buried pipelines and oil storage tanks. The principle of CP is that the anodic dissolution of metal can be protected by supplying electrons to the cathode metal. When unprotected structures are nearby to CP systems, interference problems between unprotected and protected structures may be happened. The stray current interference can accelerate the corrosion of nearby structures. So far many efforts have been made to reduce the interference in the electric railway systems adjacent to the underground metal structures like buried pipelines and gas/oil tanks. During recent few decades the protection technologies against stray current induced corrosion have been significantly improved and a number of techniques have been developed. However, there is very limited information an marine environments. Some complex harbor structures are protected by two cathodic protection systems, i.e. sacrificial anode cathodic protection(SACP) and impressed current cathodic protection(ICCP). In this case, when the protection current from sacrificial anodes returns to the cathode through electrolyte, it passes through nearby other low resistance metal structures. In many cases the stray current of ICCP systems influences the function of SACP. In this study, the risk of stray current from the SACP system to adjacent reinforced concrete structures has been verified through laboratory experiments. Concrete and steel pile structures modeled a part of bridge have been investigated in terms of CP potential and current between the two. The variation of stray current according to the magnitude of ICCP/SACP has been studied to mitigate it and to suggest the proper protection criteria.
최근 서울메트로 1,2호선 변전설비는 장기 사용한 부분부터 년차적으로 설비를 교체하고 있다. DC 급전계통 보호계전기도 76I, 50, 85, 64P 4개정도에 불과했으나 76I, 76D, DDL-I, DDL-T(Imin), 85, 64P 등 다양한 종류의 디지털 보호계전기로 세분화되었으며, 각종 이벤트 및 사고파형 등을 기록 저장하여 모든 동작사항을 검토 분석할 수 있도록 기능이 다양화 되어있다. 그러나 보호설비를 본래 보호목적에 맞게 사용하지 못하여 장애가 확대된 사례가 있어 본 논문에서는 보호계전기 종류별 보호목적, 방향, 설정치 등을 검토하여 향후 DC 차단기 보호계전기 운영에 활용함으로서 사고확대률 방지하고, 직류 보호계전시스템 운영에 있어 합리적인 방법을 제시하고자 한다.
건축기술의 발달로 유리가 벽의 구조로 일반화도어 건축되고 있으며, 기존 벽의 역할인 수직 하중을 지탱하는 역할이 없어지게 되었다. 기능과 아름다운 면을 강조하게 되어 벽이 커튼의 역할만 하게 되어, 객차 실내 유리창에 접근시 차가운 느낌으로 불쾌감을 유발 한다. 그리고 유리창 아래에 바닥 난방을 했음에도 유리창에 외풍 발생으로 결로 현상이 발생하며, 즉 유리창 주변에 물방울이 발생(곰팡이 발생 원인)하여 겨울철 난방 에너지와 여름철 외부 온열이 유리를 통해 이동 하게 된다. 그러므로 에너지효율 감소에 절대적으로 영향을 준다. 객차에 발열 유리시스템을 적용하면 유리창 표면에는 냉기의 확산이 방생 하지 않으며, 객차의 실내 냉 난방시 에너지 절감 효과가 있다.
Traffic congestions in local cities have been getting worse since 1990s, so many local governments have considered the introduction of an LRT system. So far, there is no city operating the LRT due to social environments, financial reasons, feasibility and so on. But still many cities have examined LRT or started the construction. Until now, more than 30 cities are constructing LRT or planning the introduction of LRT and it becomes 96 routes, approximately 700km. With the support of MLTM, KRRI has developed automatic LRT system with rubber-wheels, K-AGT as a result of "LRT system technology development project" from 1999 to 2005 by investing 50.32 billion wons(the public 37, the private 13.32) and finished running durability test of 100,000km at Kyeong-san test line. Currently, two trains, coupled two cars respectively have running and signaling tested. K-AGT was appointed to supply for an extension line at Busan Subway Line 3(Minam-Anpyeong section) with 17 trains(six-unit car) 102 cars. However, except for Minam-Anpyeong section, other cities such as Uijeongbu, Yongin, Daegu(Line 3) and Kwangmyeong decided to use the foreign systems, not to use the product, a result of national R&D project. This results in a huge waste of foreign currency and it is expected to require much additional cost for maintenance. If local governments use the products of national R&D projects, many national benefits such as reducing imports and protecting home industries could be expected, therefore in this paper, some plans to encourage to use products of national R&D projects were dealt with.
2004년 4월 우리나라에 고속열차를 운행한지 5년이 되었다. 프랑스 TGV 열차를 한국형 지행과 환경에 최적으로 개량한 열차가 KTX 열차이다. 고속열차에 대한 연구와 개발로 차량의 외형적 장치 설계는 독자적인 설계 능력을 갖추었으나, 고속열차 열차제어진단장치 설계는 모방의 수준에 머물려 있다. KTX의 열차의 진단제어데이터를 분석하기 위해 VME 분석장비를 사용하여 수집하는 방법과 제어데이터구조를 분석하여, 열차제어진단장치에 대한 운용능력과 설계능력을 갖추어야 한다. 다양한 고속열차가 선로에 운용됨에 따라 철도운용자에게 필요한 다양한 열차제어진단에 대한 사전 대비를 함으로서, 고속열차 안전운행과 운용정비 절감을 위해 필요하다. 단일화된 열차제어진단 설계로 한국형고속열차 제작 능력뿐만 아니라, 운용능력 향상으로 고속철도 운영국가로서 위상이 확립되어야 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.