• International Journal of Railway
• /
• v.4 no.1
• /
• pp.1-4
• /
• 2011

In this study, the feasibility of using bioremediation to treat lubricant-contaminated soil around railroad turnouts was investigated. Lubricants used during the maintenance of railroad turnouts can drip onto the ground causing soil contamination. In the laboratory experiments, the residual TPH (Total Petroleum Hydrocarbons) concentration in soil gradually decreased after microorganisms degrading the lubricants were added. Generally, the soil around railroad turnouts is covered by a layer of ballasts. In the column experiments that were designed considering field sites, the removal efficiency of TPH was about 11% after 60 days of cultivation time. In the field experiments, microorganisms were added into the soil periodically, and finally the residual TPH concentrations were reduced to less than 1,700 mg/kg-soil on average. These results indicate that the lubricant in the contaminated soil around railroad turnouts could be efficiently removed through bioremediation method.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.335-343
• /
• 2015

The role of the turnouts installed on the points of railway branches and intersections is to safely switch the directions of trains. In case of abnormal forces applied to the turnouts due to extreme operating conditions, it is difficult in the current system to conduct accurate diagnosis and measuring. Moreover, the existing measurement devices for turnout switching power are mostly based on foreign technologies, which provide only limited information on the switching power; this information is insufficient for effective monitoring and maintenance. In this paper, through an analysis of the characteristics of the switching and locking function, the problems in turnout power measurements of current electrical point machines in Korea are examined. And based on the results, a new sensor-based method for measuring switching power is proposed.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.461-466
• /
• 2020

In this study, the relationship between the track support stiffness and the track impact factor for a sleeper floating track and a turnout system with wood ties currently employed in Korean urban transit was assessed by performing field tests using actual vehicles running along the service lines. Field tests were performed on four track systems (i.e., sleeper floating track, and point, lead and crossing sections of turnout system). The theoretically designed track impact factor and track support stiffness were compared with the corresponding track impact factor and track support stiffness measured through field tests for the target tracks on the service line. The track impact factor for the service line appeared to increase with the deviation of track support stiffness according to vehicle driving direction; therefore, it was inferred that the deviation of track support stiffness between each track section directly affected the track impact factor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6214-6220
• /
• 2015

A track circuit has used stably more than 100 years for detecting train position, but solution of track circuit sort circuit incapacity due to a rust is necessary for side line in station yard, coast line and level crossing for conventional line in rural line. Domestically, Axle Counter System(ACS) has partially used for Hot Box System for high speed line and turnout for CBTC system. In contrast, most of countries has used ACS not only trunk line but also rural line and its application has increased for metro, electric car and industrial railway. In this paper, we has verified the operating status of ACS which installed with existing track circuit through log analsis to implement pilot application in mail track and turnout in station yard. And interface test with interlocking system has conducted at Obong shunting yard, as well as Cheongju station and has analyzed test result. Based on a test result, we made fail safe design, manufacturing skill and established system requirement specification for the smooth operation and maintenance.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.552-557
• /
• 2015

Ballast gravel in a railroad field is often polluted by grease and heavy metals. In this paper, the performances of a dry cleaning method for polluted ballast gravel in which pollutants on the gravel surface can be physically removed was extensively studied. A polluted ballast cleaning device able to shoot emery blasting media onto the surface using compressed air was prepared. Polluted ballast gravel was put into this device for cleaning, with the treatment time varied from 1 to 10 min. The cleaning efficiency of the total petroleum hydrocarbons and heavy metals were studied. The total petroleum hydrocarbon removal efficiency was 70-80% for gravels sampled from a locomotive waiting line, while it was 40-60% for gravels sampled from a turnout area. The heavy metal removal efficiency exceeded 90% for copper and lead, while it was 65-80% for nickel and zinc. This system was found to be effective for the remediation of polluted ballast gravels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3115-3120
• /
• 2009

An electric point-machine which changes over a turnout so that it enables a train to be operated in the routine that a train is to proceed has been installed and used in most of the railways such as not only urban railways but also main-line railways. Most of the maintenance works in this electric point-machine is that the maintenance workers manually measure motor power, control power and display power in the site with the use of portable counters. Especially in case of NS or NS-AM electric point machine, the maintenance cycle is so frequent that during the operation casualty accidents caused by carelessness occurs as well as more staff is required for this measurement. In this paper we propose a system for monitoring the state of electric point machine installed in the site to improve maintenance efficiency and it is expected that this monitoring system confirms any measured values on electric point machines in real-time and improves maintenance efficiency.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.9-18
• /
• 2011

Recently, in the era of low carbon and green growth, the importance of railway transportation is being emphasized However, there is a lack of research on simulation for railway depot. This paper presents the development of the dynamic simulator for LRT(Light Rail Transit) depot. This study presents explanations of requirement analysis, architecture, database design, simulation algorithm, and design and development of the simulation tool. The dynamic LRT depot simulation tool consists of four modules; a Network Editor to create and modify information regarding railroad, train, signal, turnout, job and station, a Simulator to calculate train movement algorithm, a Reporter to show simulation results in table and graphs, and an Animator to animate simulation results dynamically. It is hoped that this study on general details of structure, design and development of LRT depot dynamic simulator will perform as a good reference to future development of new simulation tools.