• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.548-553
• /
• 2019

Along with advanced vehicle to vehicle (V2V) communication technologies, platooning is regarded as one of the most promising form of autonomous driving solutions in order to increase road capacity. In this paper, we propose a novel V2V transmission scheme for safety message dissemination in platooning. The proposed scheme enhances the efficiency of channel access and multi-vehicle orthogonal frequency division multiple access (OFDMA) transmission by taking advantage of triggered uplink access technique and null data packet feedback report protocol introduced in the sixth generation WLAN standard, IEEE 802.11ax. The simulation results prove that the proposed scheme outperforms the conventional IEEE 802.11 transmission scheme throughout all measured vehicle density range.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.67-72
• /
• 2010

In this paper, we verify the driverless operation possibility of MBS, which could overcome the defects of conventional track-circuit-based FBS, such as additional needs of maintenance and others problems according to short-circuit sensibility and, and which could allow the minimal interval between trains. With MBS, we can expect the reduction of headway, then the increase of transportation demand, and the protection of unnecessary speed variation because it allows the real time detection of train position from central office, and direct transmission of data between preceding trains and the following ones. In addition, it is possible to reduce the number of wayside-equipment substantially, to improve the passenger service, and to the achieve the positive economic effects by comfortable ride.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2303-2315
• /
• 2008

Finally, Musan-Bongdong section in Kyeong-Ui corridor opened on 11. DEC.2007, which is a historical event, because this connection means the restoration of 56 yrs' disconnection since 1951 and also starting point launching to connect china, Mongolia, Russia for continental railway logistic infrastructure. This is also one of master plans about the northern line in TAR, carried out by UNESCAP, so this study will touch up each country's railway status and the next tasks related with trans-continental railway such as North Korea, Russia, China. Also, this study reveal a mid-long term development strategy to improve the North Korea railroad for a continent rail link and international railroad transportation between China and Russia, and also checks the way of confrontation to the domestic infrastructure for the activation of the continent railway and the north and south, investigates concretely how to establish TAR northern part routes as soon as possible.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.149-156
• /
• 2015

It is necessary to determine real path for urban railway users in order to allocate revenues between urban railway organizations. Out of several algorithms used to determine optimal routes, the k-path algorithm based on link-label has been utilized. However, this k-path algorithm has certain flaws. For example, optimal route can change depending on the travel and walking time, transfer penalty, and so on. Also, this algorithm cannot take into account the characteristics of users, who prefer express train to normal trains. In this paper, an algorithm is proposed to determine one single optimal route based on the traffic card data. This method also can search for an optimal path in conjunction with the railway timetable.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.99-103
• /
• 2013

In this paper, research on the thermal analysis method is reported for the characterization of heat generation while operating an Interior Permanent Magnet Synchronous Motor (IPMSM) for railway vehicles. Efficient cooling of the heat generated in the IPMSM is important because the excessive heat generated from the winding, core and permanent magnets increases the difficulty of continuously operating an IPMSM over long time periods. Therefore, in this study, in order to analyze the heat generation characteristics of the IPMSM for advanced research in the application of IPMSMs to cooling devices, the heat transfer coefficients for each component of the IPMSM were derived and the thermal equivalent circuit was configured to perform thermal analyses. Finally, the validation of the suggested thermal analysis method was performed through comparison with the heat experimental data of an IPMSM prototype.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.692-702
• /
• 2017

Recently, there has been a growing interest in using smart card data. However, there are restrictions on the utilization of data in many areas outside the Seoul metropolitan area because the data does not contain alighting information. This paper presents a methodology for estimating alighting stops of smart card data. Estimation results were verified by smart card data from Seoul and Gwangju. The estimation rates were 78.2% and 81.6% in Seoul and Gwangju, respectively. The matching accuracy was 54.2% and 33.4%, respectively. However, if up to two stops of error are allowed, the accuracy values were 93.6% and 94.0%, respectively. We also discussed changes in estimation results due to adjusting the allowable walking distance, which is a key parameter of trip chaining methods. As the allowable walking distance increases, the estimation rate increases, while the accuracy decreases, and it is found that the estimation results change by around 500m.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.313-319
• /
• 2017

Fiber optics sensors that have been mainly applied to aerospace areas are now finding applicability in other areas, such as transportation, including railways. Among the sensors, the fiber Bragg grating (FBG) sensors have led to a steep increase due to their properties of absolute measurement and multiplexing capability. Generally, the FBG sensors adhere to structures and sensing modules using adhesives such as an epoxy. However, the measurement errors that occurred when the FBG sensors were used in a long-term application, where they were exposed to environmental thermal load, required calibration. For this reason, the thermal curing of adhesives needs to be investigated to enhance the reliability of the FBG sensor system. This can be done at room temperature through cyclic thermal load tests using four types of specimens. From the test results, it is confirmed that residual compressive strain occurs to the FBG sensors due to an initial cyclic thermal load. In conclusion, signals of the FBG sensors need to be stabilized for applying them to a long-term SHM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4532-4541
• /
• 2013

With speed up of railway, the demand for safety of the railroad transportation is on the increase in Korea's conventional railways. In additions, freight trains with heavier axle load are required to run conventional railways. In order to solve these requirements, the increase of rail weight and the application of long rail system have been underway in conventional railways. However, the research on ties that is absolutely influencing the track stiffness in ballasted tracks has not been much progress. In this paper, the new H-typed tie is developed to increase the track stiffness and reduce the track irregularity. And from the structural analysis by FE program, the intial design drawing of the new H-typed tie is proposed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.6_spc
• /
• pp.644-650
• /
• 2016

Track maintenance works based on track geometry recordings are essential to enhance the safety and comfort of railway transportation. Usually, the track irregularity has been measured by a special inspection trains which all were imported from abroad. Because the inspection train speed is limited under 160 km/h, it takes a long time to inspect railways and there is difficulty in daytime operation. To solve this problem, we started to develop a track geometry measuring system (TGMS) with measurement speed up to 300 km/h which can be installed in commercial vehicles such as HEMU-430X. In this paper, we introduce a newly developed inertial TGMS and propose two inertial navigation system (INS) algorithms (method A, B) for measuring track geometry. In order to investigate advantage and disadvantage of each algorithm, we performed vibration test of the TGMS, which was simulated by 6-axis shaking table. Through the vibration test, we analyzed the influence of vehicle vibration on the TGMS which will be installed on bogie frame. To the vibration test, two methods satisfied the required accuracy of track geometry measurement under the level of the actual vehicle vibration of HEMU-430X train. Theoretically, method A is sensitive to vehicle vibration than method B. However, HEMU-430X's bogie vibration frequency range is out of interest range of measurement system. Therefore, method A can also apply the HEMU-430X train.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.46-53
• /
• 1999

As of July 1999, i,185 lomocotives(excluding metropolitan area electric locomotives) are in Korean National Railroad(KNR). With this limited number of resources assigning locomotives to each trains of timetable is very important in the entire railway management point of view because schedule can be regarded as goods in transportation industry. On a simple rail network, it is rather easier to assign proper locomotives to trains with the experience of operating experts and get optimal assignment solution. However, as the network is getting bigger and complicated, the number of trains and corresponding locomotives will be dramatically increased to rover all the demands required to service all of the trains in timetable. There will be also numerous operational constraints to be considered. Assigning proper locomotives to trains and building optimal cyclic rotations of locomotive routings will result in increasing efficiency of schedule and giving a guarantee of more profit. The purpose of this study is two fold: (1) we consider a planning-level locomotive scheduling problem with the objective of minimizing the wasting cost under various practical constraints and (2) development of implementation prototype program of its assigning result. Not like other countries, i.e. Canada, Sweden, Korean railroad operates on n daily schedule basis. The objective is to find optimal assignment of locomotives of different types to each trains, which minimize the wasting cost. This problem is defined on a planning stage and therefore, does not consider operational constraints such as maintenance and emergency cases. Due to the large scale of the problem size and complexity, we approach with heuristic methods and column generation to find optimal solution. The locomotive scheduling prototype consists of several modules including database, optimization engine and diagram generator. The optimization engine solves MIP model and provides an optimal locomotive schedule using specified optimization algorithms. A cyclic locomotive route diagram can be generated using this optimal schedule through the diagram generator.