• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.455-460
• /
• 2020

The governments of Korea, China, and Japan have operated comprehensive research institutes for railway technologies. Korea Railroad Research Institute (KRRI), China Academy of Railway Sciences Corporation Limited (CARS), and Railway Technical Research Institute (RTRI) are representatives of comprehensive railway research institutes in each country. KRRI was found to be the most advanced in the quantitative competitiveness of patents. In terms of qualitative competitiveness, KRRI has strength in civil engineering, whereas RTRI has strength in electricity. KRRI was found to have the greatest efforts in securing competitiveness in overseas property rights. By comparing the publication of papers, CARS published the most papers. On the other hand, from 2015, KRRI showed an upward trend and published the most papers. By examining the impact of the papers by the citation, KRRI was found to have higher competitiveness than the other two institutions. In the future, it will be necessary to perform big data analysis on patents and papers of the three organizations, derive the key research areas and promising technology areas for each institute, and establish a mid-to-long-term development plan for railway technology based on scientific evidence.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.1-10
• /
• 2020

Safety can be defined as being maintained or reduced to a level below which the possibility of human or physical harm can be tolerated through continuous identification of risks and safety risk management. FAA, EASA, IATA and Boeing, major organizations that conduct research and analysis for aviation safety around the world, report that about 70 percent of aviation accidents are caused by human factors, which have led to a surge in interest in human factors-induced accident prevention activities around the world. As part of this purpose, the FAA in the U.S. is raising awareness among aviation workers by publicizing the 12 human errors (Boeing, 2016), which account for the largest part of aviation accidents under the theme of Dirty Dozen, to prevent aviation accidents. Therefore, based on the domestic helicopter accidents reported to the Air Railroad Accident Investigation Committee from 2007 until recently, this study aims to use HFACS to extract human factors for the six recent helicopter accidents in Korea, analyze the extracted human factors in conjunction with the Dirty Dozen concept, and then present measures to prevent accidents by item.

• Proceedings of the KIEE Conference
• /
• 2006.05a
• /
• pp.24-26
• /
• 2006

In these days, Korea Railway apply simple catenary system to general lines and high speed lines of Korea Electric Railway. Circulation Current in catenary system frequently bring undesirable consequences. Namely, the Connector wire has many problems according to a flow of excessive circulation (or traction current) and a sudden rise of temperature on catenary when electric car or locomotive is running in high speed. The occurrence of events by the load increasement do considerable damages to peoples, organizations and systems. In this paper, we proposed the improved changes on the catenary system of a improvement and change of a messenger wire protector, improvement of connector wire,s institution angle and of a replacement the connector wire with a dropper. A case of Circulation Current continually has broken out in Yongdungpo Electric Office's own bailiwick. By or through the medium of these obstacles, we have further use of many studies and considering countermeasures. Therefore, we have to deal with the question in design and execution of catenary system for High Speed Railway because we will spend a lot of time and more money for maintenance than for construction of that.

• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.195-197
• /
• 2009

It is a proven fact with the opening of the Seoul metro line number 1 in 1974 traffic congestion on the roads has decreased and the efficiency of people transportation in general has greatly been enhanced in the downtown and surrounding areas of Seoul. Even today construction of new subway lines are under way and many more are being planned due to the easy access to stations, short waiting and average travel times, compared with personal vehicles, contributing to the efficiency of the public transportation systems that are linking the downtown areas and also the intercity systems in moving passengers during rush hour and times of special event. Since the labour costs of the train operator in any large city based subway system accounts for a major part of the operating costs per kilometer and to ensure cost efficient operations, especially during non-peak hours, it is necessary to implement an unmanned(auto-driven) subway system. In order to implement such a system it is imperative that the on-board and wayside signalling control systems be fully automated as well. Only through proper examination of safety procedures not only by the AUGT(Automated Urban Guided Transport)system but also by ail the international standards organizations involved can safely and stability be ensured.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.375-378
• /
• 2007

In these days, Korea Railway apply simple catenary system to general lines and high speed lines of Korea Electric Railway. Circulation Current in catenary system frequently bring undesirable consequences. Namely, the Connector wire has many problems according to a flow of excessive circulation (or traction current) and a sudden rise of temperature on catenary when electric car or locomotive is running in high speed. The occurrence of events by the load increasement do considerable damages to peoples, organizations and systems. On a case by case accidents, the reeltype protective cover as part of various methods has some problems. In this project, we proposed the improved changes on the catenary system of a improvement and change of a messenger wire protector, improvement of connector wire's institution angle and of a replacement the connector wire with a dropper. Its tridimensional space limitation dictated the scale of the $32{\times}{\Phi}55$ to be as small as possible. It is easier to install than work by the existing cover on the messenger wire.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.205-216
• /
• 2009

The aim of this study is to propose an integrated operation plan of information call services by multi-connecting call services which are now being serviced by each different call number services and by providing one stop service which organically links alternative transportations such as railroad, air, and bus and also related organizations as well as road traffic information. For the objective, we analyzed the current status of Korean and foreign country systems and reviewed operation technology and technical specifications of the integrated system according to 3 steps, i.e. infrastructure procurement, test bed and extended completion, stabilization and high valuable services completion. Throughout the result of this study, traffic information one stop service, convenient service, diverse related information provision service, real-time information provision, and efficient system are expected to be implemented in the traffic information call service.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.335-342
• /
• 2003

The method of measuring ground deformation modulus, in situ-testing has the disadvantage where the exam number is limited because it needs counter weight and a lot of measurement times. Recently, it has supplemented this problem and the equipments by which measurement can be made quickly are developed and applied in field., That is Falling Weight Deflectometer(FWD), Light Drop Weight Tester(LDWT), Geogauge. Light Drop Weight Teste.(LDWT) is introduced firstly in the name of ‘a lightweight fall circuit tester for a railroad public corporation’ by KTX. Since KTX introduced LDWT, a number of research organizations have used LDWT to find out domestic standard for quality management of base ground. In this study we used ZFG 02 which was manufactured by Stendal in Germany and measured the dynamic deformation modulus in soil box and in-situ. And we analyzed the correlation of the dynamic deformation modulus with static deformation modulus based on plate test in the same ground.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.229-248
• /
• 2011

The increasing complexity of business and social settings bas lead to innovation becoming a strategic imperative. The need for innovation in the quest for competitive advantage also means that firms must be dynamic and flexible. This is often achieved through collaborative arrangements such as strategic alliances or strategic network Many organizations form alliances by leveraging their resources to gain access to the partner's skills and capabilities; ultimately to enhance innovation and performance. We demonstrate empirically that the "chain of innovation" is central to the process of innovation in global alliances. This chain comprises the creativity and learning processes and knowledge stock in alliances. Our empirical analysis is based on a survey of alliances that resulted in 114 responses. For management, this research bas significant potential in guiding attention to the chain of innovation, to better manage the overall process of innovation in alliances. Our work shows that more effective creativity and learning processes and a greater knowledge stock lead to a more effective alliance innovation process. Managers therefore, need to concentrate on creating environments wherein the processes of creativity and learning are fostered, increasing the alliance knowledge stock and in turn, increasing innovative output via an effective innovation process.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.157-165
• /
• 2015

At the end of the 19th and in the early 20th centuries, Japan, Korea, and Manchuria, and areas throughout East Asia, suffered a number of cycles of growth and development, for which the railway was a very important development tool and was closely associated with national policy. East Asian affairs, especially at the time, seemed very important to the continent, and their influence on the advance of this remarkable era was especially prominent in Japan. In the midst of this period, the national railway may have evolved under national policy and railway policy and under a variety of organizations and persons of influence. In this paper, we have tried to find the similarities and differences among the three countries that built the East Asia Railway; we consider the characteristics of the East Asia Railway from the perspectives of these three countries. Comparing the characteristics of the three country's railways, first, Japan had the motives of continental expansion and modernization in its pursuit of the railway; in Korea, the railway played the role of a continental rail link; and in Manchuria there was a tendency to pursue direct domination of the railway. Second, the Japanese applied their railway model to Korea; the Korean railway may have been in operation, but it was an extension of the railway of Japan. The railway in Manchuria showed a similar pattern to that which can be found in the state of Asian domination of Europe ; Japan showed aspects of dominance over the railway because it had experience running a private railway.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.1001-1012
• /
• 2018

Regarding the small- and medium-sized enterprises in Korea that manufacture the railway vehicle parts, there are over 250 related companies. And they have been surviving in the form of producing and delivering the parts of the railway vehicles by importing the technologies and the products of the foreign countries rather than possessing their own technological abilities. Due to this, regarding the industry of the core components of the railroads, the dependence on the overseas has been high. As such, although, for supporting the small- and medium-sized enterprises that manufacture the railway vehicle parts, the government has been strengthening the diverse policy supports, it is a fact that the effectiveness of the support is not high. And, in order to effectively support these, there is a need to understand clearly and definitely what the important promotion factors are in the process of the technology commercialization. Accordingly, through the precedent researches regarding the factors that promote the technology commercializations of the small- and medium-sized enterprises that manufacture the railway vehicle parts, this research had extracted 10 main items. And the level of the importance of these indices was analyzed by using the AHP (Analytic Hierarchy Process). As a result of the AHP analysis, the factors within a corporation appeared to be the most important factor. And, as for the lower-ranking item, the commercialization capability was analyzed to be the most important item. It is highly expected that the contents and the results of this research will be usefully used when formulating the planning of the support program and the support policy for the technology commercializations by the public research organizations and the railroad management organization, which is an organization that supports the small- and medium-sized enterprises that manufacture the railway vehicle parts.