• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.580-587
• /
• 1998

For many decades, the railway was constructed using tracks with jointed rails of relatively short lengths in accordance with rolling and handling technology. The joints cause many drawbacks in the track and lead to significant maintenance cost. So, railroad engineers became interested in eliminating joints to increase service loads and speeds by improving rolling, welding, and fastening technology, Continuous welded rail(CWR) track has many advantages over the conventional jointed-rail track. But in the case of the elimination of rail joints, it may cause the track to be suddenly buckled laterally by thermal and vehicle loads. Thermal loads are caused by an increase in the temperature of railway track. In this paper, CWR track model and CWRB program are developed for linear buckling analysis using finite element method(FEM). The finite element discretization is used with a total of 14 degrees of freedom for each rail element. The stiffness of the fastener, tie, and ballast bed are included by a set of spring elements. The investigation on the buckling modes and temperature of CWR track is presented in the paper.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1058-1070
• /
• 2007

Internal and external railway management corporations are using the periodic replacement criteria of rail by accumulated passing tonnage and wear to maintain rails for servicing. However, internal the periodic replacement criteria of continuous welded rail(CWR) by accumulated passing tonnage is the one(50kg/m-5 million gross tonnage, 60kg/m-6 million gross tonnage) presented in Japan before. It was estimated with the fatigue life about 50kg N rail joints applied diesel train load but it wasn't applied to current conditions of track; elimination of rail joint, using the concrete slab track and operation of light train load and effect of welding, manufacturing technique, grinding of rail. Therefore, in this study, it was investigated the types of damage and cause in welded rails and examined standards and information resources. Also, this study presents preliminary data to revise the periodic replacement criteria of CWR by current accumulated passing tonnage in bending test of laid welded rail and a survey of track maintenance history of Seoul metro.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.488-493
• /
• 2001

CWR technology is generally believed to contribute to the increase of train speed and bring a variety of significant advantages, such as the decrease in track works, noise and vibration as well as the improvement of passenger comfort. In CWR technology, welding is considered to be one of the most important element technologies. Among the various welding methods, thermit welding is the most frequently used one for site welding since the operation is simple and the instruments are light as well as easy to deal with. However, it could cause interference with safety operation of trains since thermit welding points, are essentially made of castings and there are potentialities of defects according to the operation conditions, the environment of the site as well as the dexterity of the worker. This study tries to describe the characteristics of thermit welding, defect-causing factors and defect-detection methods at welding points.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.775-780
• /
• 2004

CWR technology is generally believed to contribute to the increase of train speed and bring a variety of significant advantages, such as the decrease in track works, noise and vibration as well as the improvement of passenger comfort. In CWR technology, welding is considered to be one of the most important element technologies. Among the various welding methods, gas pressure welding is the most frequently used in vicinity of train line station since the operation is simple and the instruments are not heavy. The gas pressure welding is constructed exactly by good manual book on which simple and excellent welding methods is written and has the same performance as raw material. But this can be poor in the variety of the processing of rail end surface to be welded, the control of oxyacetylene flame and axil compressive force. This study tries to describe the characteristics of gas pressure welding, defect-causing factors and preventive counterplan of defects

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.6-12
• /
• 2016

This study was performed bead welding of pure titanium by using fiber laser. Since titanium is very sensitive to oxidation and nitriding during welding, it is important to compose the shielding equipment compared with different material. Thus side and coaxial shield nozzle, rail and chamber type shielding equipment are widely used to protect effectively the weld during welding. Experiments were performed by changing nozzle angle and distance using side and coaxial shield nozzle. The bead colors of gold, brown, blue, purple and yellowish white were obtained by changing variables of shield nozzle, and then its weldability was investigated. As experiment result, sound and not brominated beads were formed when side nozzle angle and distance were respectively $45^{\circ}$ and 10 mm.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.177-179
• /
• 2005

As rail steel at a crossing area must undergo much higher loading than those at regular railway, Mn-containing casting steel is normally used for its high load-carrying capability and reduced wear rate. However, as these Mn-containing casting steel is tend to have casting defects, manufacturing cost to produce defect-free Mn-containing casting steel becomes quite expensive. Therefore, in order to investigate the possibilities of replacing expensive Mn-containing casting steel with a mild steel with a surface build-up using a Mn-alloyed steel electrode.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.59-68
• /
• 1997

The modelling techniques of a center pillar-to-roof rail joint for low frequency vibration analysis are examined and some fundamental problems are addressed. To develop a simplified beam-spring model of the joint, the present work is focused on 1) practical shell modelling techniques and 2) joint spring stiffness estimation methods a practical model-updating method to match the calculated natural frequencies to the experimentally determine ones is proposed, particularly focusing on spot welding modelling. In joint spring modelling, the results from the model with one joint spring are compared with those from the model with three coupled springs. Finally, some fundamental problems in beam-spring modelling are addressed.

• Journal of Welding and Joining
• /
• v.18 no.5
• /
• pp.77-83
• /
• 2000

This study proposes the analysis and evaluation method of time series ultrasonic signal using the attractor analysis. Features extracted from time series signal analyze quantitatively characteristics of weld defects. For this purpose, analysis objective in this study is fractal dimension and attractor quadrant feature. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics resulting from distance shifts such as parts of head and flange even though the types of defects are identified. These difference in characteristics of weld defects enables the evaluation of unique characteristics of defects in the weld zone. In quantitative fractal feature extraction, feature values of 3.848 in the case of part of head(crack) and 4.102 in the case of part of web(side hole) and 3.711 in the case of part of flange(crack) were proposed on the basis of fractal dimensions. Proposed attractor analysis and DAC in this study can enhance the precision rate of ultrasonic evaluation for defect signals of rail weld zone such as side hole and crack.

• Journal of Welding and Joining
• /
• v.25 no.1
• /
• pp.14-23
• /
• 2007

A lot of fatigue tests on a material, JIS SM490A, with yielding strength of about 350 MPa and tensile strength of about 520 MPa were carried out. Various butt-welded specimens such as reinforcement removed, as-welded and weld toe ground, several types of fillet-welded specimens and full-size box type components were used. After having obtained S-N curves for the above- mentioned specimens, fatigue strengths were compared to those of foreign design codes, AWS, BS 7608 and ENV. It was found the fatigue strengths at low cycles are not in a good agreement with the foreign codes, but the fatigue limits are in a good agreement.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.668-673
• /
• 2004

The Friction Stir Weld (FSW) has been prevailing in the rolling stock manufacturers now a day especially in Europe and Japan, that will be an inevitable welding method in Korean domestic railway industry in the near future. The Welding Institute (TWI) in United Kingdom (UK), who has the right of international patents, invented FSW. To meet the recommendation of Cullen's Report for Ladbroke Grove Rail Inquiry (LGRI) in UK, the FSW is considering for the only alternative welding method to improve the aluminium welding quality, i.e. for improve unzipping defect and crashworthiness on car body in Europe Railways within Railway Safety Research Program.