• 비파괴검사학회지
• /
• 제31권4호
• /
• pp.391-397
• /
• 2011

용접부에 대한 품질 확보를 위하여 방사선투과시험을 실시하고 있으나 기존의 방사선투과시험은 필름을 사용한 아날로그 방법을 적용하고 있는데 비용과 시간이 많이 소요되고 시험 공정이 복잡하여 개선이 요구되고 있다. 본 연구에서는 용접부에 대한 디지털 방사선투과영상과 아날로그 방사선투과영상의 상질을 비교한 결과, 디지털 방사선투과영상은 디지털 영상 개선 과정으로 인하여 필름 영상에 비해 보다 세밀한 관찰을 할 수 있었다. 따라서 디지털 방사선투과시험이 개선이 요구되고 있는 기존 필름에 의한 방사선투과시험을 대체할 수 있을 것으로 평가된다.

• Journal of Radiation Protection and Research
• /
• 제47권2호
• /
• pp.93-98
• /
• 2022

Background: This study aims to derive the characteristics of each work type for industrial radiography based on empirical evidence through expert advice and a survey of radiation workers of various types of industrial radiography. Materials and Methods: According to a Korean report, work types of industrial radiography are classified into indoor tests, underground pipe tests, tests in a shielded room (radiographic testing [RT] room test), outdoor field tests, and outdoor large structure tests. For each work type, exposure geometry and radiation sources were mainly identified through the expert advice and workers' survey as reliable empirical evidence. Results and Discussion: The expert advice and survey results were consistent as the proportion of the work types were high in the order of RT room test, outdoor large structure test, underground pipe test, outdoor field test, and indoor test. The outdoor large structure test is the highest exposure risk work type in the industrial radiography. In most types of industrial radiography, radiation workers generally used ¹⁹²Ir as the main source. In the results of the survey, the portion of sources was high in the order of ¹⁹²Ir, X-ray generator, ⁶⁰Co, and ⁷⁵Se. As the exposure geometry, the antero-posterior geometry is dominant, and the rotational and isotropic geometry should be also considered with the work type. Conclusion: In this study, through expert advice and a survey, the external exposure characteristics for each work type of industrial radiography workers were derived. This information will be used in the reconstruction of organ dose for health effects assessment of Korean radiation workers.

• Journal of Welding and Joining
• /
• 제35권2호
• /
• pp.63-70
• /
• 2017

As the Non Destructive Test (NDT) for the welded structure, PT(Penetration Test). MT(Magnetic Test), RT (Radioisotope Test) and UT(Ultrasonic Test) methods are widely used in practice. These NDT methods have been developed toward high efficiency, low cost, real time, and high precise new NDT. For example, RT methods are developed to CT(Computed Tomography)and DR(Digital Radiography), and UT metheds are developed into Phased array, Guide wave, TOFD method. Moreover, the Infrared thermography and Laser ultrasonic technique are newly developed for applying in high temperature objects as the non-contact NDT methods. In this review paper the new high efficiency NDT methods for the welded structure are introduced and the trend of NDT rules applying in welded structure are described.

• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.271-281
• /
• 2010

Brazing fitting which is one of the aircraft hydraulic power system components is widely used for saving weight and achieving higher reliability. Any inherent defects or damage of fitting can cause system failure and/or physical damage of human body due to highly pressurized fluid. Radiographic testing(RT) technique and additional micro-structure investigation on cut-away surfaces have been accomplished to find out some defect-like-inhomogeneity in the fittings. The radiography results showed that some defect-like-inhomogeneity existed inside body. Additional micro-structure investigation on cut-away surface reveals that the inhomogeneity is due to internal voids. In this study, it can be is said that RT technique can be a useful tool for field acceptance test of hydraulic brazing fitting in short time.

• 한국정보통신학회논문지
• /
• 제25권2호
• /
• pp.193-201
• /
• 2021

용접은 선박 및 해양플랜트의 생산 및 건조에 있어 매우 높은 비중을 차지하는 작업이다. 용접부의 품질 검증을 위해 비파괴 검사를 수행하는데, 우리나라에서는 주로 방사선투과검사(RT)를 활용한다. 현재 대부분의 조선소에서는 용접부의 촬영을 통해 얻어진 필름을 인화하여 검사에 활용하는 아날로그 형태를 채택하고 있다. 이에 방사선 촬영에서부터 합부 판정까지 소요시간이 길고 복잡하며, 관련 분야의 자격을 보유한 검사자에 의해 수작업으로 진행되고 있는 실정이다. 본 논문에서는 이러한 문제를 개선하기 위해 조선소에서 발생하고 있는 RT 필름을 고해상도로 스캔하여 디지털화한 후, 관리 서버에 축적하고, 인공지능 기술을 적용하여 용접 결함을 판독하기 위한 플랫폼에 관한 내용을 다룬다. 이를 위한 일련의 요소인 아날로그 RT 필름 스캔장비, 용접 검사 정보 통합 관리 플랫폼, 결함 판독 알고리즘, 시각화 소프트웨어 등을 설계 및 개발하고, 개발한 각 요소를 상호 연계하여 테스트 및 검증하는 과정에 관하여 기술한다.