• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.90-95
• /
• 2013

Pipe inside clad welding is mainly used to the flow pipe of sub-sea or chemical plant. For the inside clad welding to the medium pipe with the diameter of about 12", TIG welding is frequently applied with filler metal. In this case, the clad welding has the very broad weld area over $10m^2$. And, the non-destructive test (NDT) such as ultrasonic test (UT) or radiographic testing (RT) should be conducted on the broad weld area, and it costs very high due to the time-consuming work. Therefore, the present study investigated the variation of arc voltage to develop the in-line quality monitoring system for the pipe inside TIG cladding. The 4 experimental parameters (current, arc length, wire feed position, and shield gas flow rate) varied to observe the change of arc voltage and to establish the model for the monitoring. The arc voltage was decreased when the wire was fed to the backward eccentric position(over 2mm), and the shield gas flow rate was insufficient under 10L/min. In the case of the backward eccentric position over 2mm, the bead appearance was not good and the dilution ratio was increased due to deep penetration. When the shield gas flow rate was lower than 10L/min, the bead surface was oxidized.

• 비파괴검사학회지
• /
• 제27권1호
• /
• pp.31-37
• /
• 2007

하나로와 동위원소 생산시설을 활용하여 비파괴검사용 $^{192}Ir$ 미세초점선원의 생산기술을 개발하였고 현장적용시험을 통하여 개발된 제품의 성능을 확인하였다. 직경 0.5 mm ${\times}$ 높이 0.5 mm인 선원의 개발을 위해 알루미늄 캡슐 압착 방법 및 장치를 개발하여 표적을 제작하였으며, 하나로를 이용한 방사능 생성량을 평가한 결과 약 3.0 Ci 방사능의 선원 제조가 가능함을 확인하였다. 또한 컴퓨터 CPU 및 탄소강에 대한 비파괴검사를 실시하여 투과도계 감도 및 기하학적 불선명도가 비교 대상 선원에 비해 우수함을 확인하였다. 이 선원의 초점크기는 기존의 선원에 비해 매우 작기 때문에 근접 및 접촉촬영과 튜브-튜브시트 용접부의 비파괴검사에 있어 기하학적 불선명도를 최소화 할 수 있을 것이다.