• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.236-239
• /
• 2000

OFDM Transmission system can effectively reduce ISI(Inter Symbol Interference) caused by multipath fading, especially in the case of broad band data transmission. Nevertheless, the delayed waves existing in a symbol degrade the transmission Performance at the receiver. Therefore when OFDM transmission system applies to mobile radio communication system, we have to remove the influence without intricacy. This paper proposes and design a new scheme in order to estimate propagation characteristics using the characteristics of distinctive OFDM signal which is inserted pilot signal periodically in frequency axis before IFFT at the transmitter Moreover, we introduce a cancellation scheme of delayed signal on the basis of the proposed estimation technique. Using these schemes, it is possible to estimate and cancel the Interference of the delayed signal before FFT at the receiver.

• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.544-550
• /
• 2009

In this paper, we proposed the radio wave propagation characteristics of the next-generation ultrafast wireless communication system in millimeter-wave fading channel. For considering doppler shift and Rayleigh fading simultaneously, the fading simulator of Jakes model implemented and analyzed the performance of the next-generation wireless communication system. In addition, the error rate characteristics of DS-CDMA system analyzed in the millimeter-wave fading channel and the system performance improved by coding technique and diversity technique.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.38-41
• /
• 1998

Due to the increasing demand to multimedia services over wireless communication network, LMDS(Local Multipoint Distribution Service) has been proposed as an alternate approach for broadband wireless access network. But LMDS, Which uses the mmwavelength radio spectrum, has been limited for unknown microwave frequency characteristics. In this paper, we analyze the parameters related to the system design on 28GHz frequency: Propagation path loss and rainfall attenuation. Based on these analytical results, the proper cell size in Korea is determined. We also analyze the bit error rate and frame loss rate for various kinds of digital modulation schemes(QAM 4, 16, 64, 256). Finally, we apply to ㅍ service to evaluate a call blocking rate, efficiency and channel capacity.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.363-368
• /
• 2011

The DGPS transmits the enhancement signal to GPS using the medium frequency band. The NDGPS service that covers the Korean peninsula has been started since 2009. The service area of ocean-based DGPS(maritime-DGPS) reference stations covers the 100NM, but land-based DGPS(land-DGPS) covers 80km service area less than that of maritime DGPS. The DGPS's antenna has the top-loaded monopole antenna type. Top-loaded monopoles are the logical antennas to be used in order to get a low profile antenna and a performance according to the broadcaster and communication needs. The antenna needs to get the ground plane with good conductivity characteristics and flat ground plane without obstacle near to the transmitting antenna. In this paper, the radiation characteristics of an equivalent MF antenna are analyzed in view points of the ground conductivity and the ground plane with obstacle near to the antenna.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.22-32
• /
• 2013

Wireless Sensor Network(WSN) has attracted great interest recently and the necessity of ZigBee has appeared to standardize and apply the upper layer specification based on the IEEE 802.15.4 standard specification in industrial field. Currently, there are many studies about the IEEE 802.15.4/ZigBee communication channel. And it is subject of interest to analyze the performance in various channel environments. In this paper, we propose channel models through the analysis of the IEEE 802.15.4 radio wave propagation characteristics in various channel environments. Also, we have analyzed the performance of the IEEE 802.15.4/ZigBee for the standard of physical layer of 2.4GHz band in each channel environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.51-58
• /
• 2010

According to dramatic increase of wireless communication demand, more spectrum resources are needed to support considerable and various wireless services, so cognitive radio(CR) was proposed to reuse unused frequency efficiently. Also, FCC revises its policies regarding the usage of the TV white spaces by unlicensed users. CR is an intelligent wireless communication system that is aware of the radio environment and is capable of adapting its operation to the statistical variations. Spectrum sensing is the key task of the CR systems. However, since spectrum sensing performance changes according to the received signal that is received various geography environment, regional characteristics are considered to estimate the path-loss. Therefore, for more accurate analysis and simulation, we demonstrate the spectrum sensing performance of CR system by various method applying Okumura-hata propagation model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1142-1149
• /
• 2007

In this paper, the development of wideband MIMO channel sounder and a pilot measurement result is described for research on the multi antenna radio propagation characteristics considering urban environment at microwave frequencies. We developed $4{\times}4$ MIMO(BW:100 MHz) channel sounder using the high speed switching mechanism and periodic pseudo random binary signals method considering next generation mobile communication system. A pilot measurement campaign at the urban area of Bundang is presented for confirmation of system performance. From the analysis of measurement data, wideband path loss exponent of 3.7 and 8 GHz band is 1.79 and 1.76. Average RMS delay spread is 200 ns and 42 ns respectively. From the experiment results, operation of this measurement system is confirmed considering research for a coverage, SNR and channel capacity in urban environment at microwave frequencies.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.684-690
• /
• 2015

This paper presents a modified residual-based EKF (Extended Kalman Filter) for performance improvement of indoor positioning using WiFi RSSI (Received Signal Strength Indicator) measurement. Radio signal strength in indoor environments may have irregular attenuation characteristics due to obstacles such as walls, furniture, etc. Therefore, the performance of the RSSI-based positioning with the conventional trilateration method or Kalman filter is insufficient to provide location-based accurate information services. In order to enhance the performance of indoor positioning, in this paper, error analysis of the distance calculated by using the WiFi RSSI measurement is performed based on the radio propagation model. Then, an IARM (Irregularly Attenuated RSSI Measurement) error is defined. Also, it shows that the IARM error is included in the residual of the positioning filter. The IARM error is always positive. So, it is presented that the IARM error can be estimated by taking the absolute value of the residual. Consequently, accurate positioning can be achieved based on the IEM (IARM Error Mitigated) EKF with the residual modified by using the estimated IARM error. The performance of the presented IEM EKF is verified experimentally.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.99-111
• /
• 2010

In this paper as a follow-up to Paper I, the required fade margin derived in Paper I to preserve the same service quality has been examined by analyzing system and propagation characteristics as well as measured data. The comparison of the fade margin between simulated and measured results is also performed for the actual operating line-of-sight(LOS) and non-LOS links, and practical usefulness as an analysis tool is revealed by checking service quality of M/W system relevant to frequency reallocation. According to simulated and measured results, there was a little difference for LOS link between Mt. Moodung and Mt. Mangun, but a fairly good agreement was reached for non-LOS link between Andong KBS and transmitter site.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.35-40
• /
• 2024

In this paper, the design, implementation, and analysis of a device capable of transmitting and receiving millimeter-wave signals and performing channel sounding measurements in atmospheric conditions at distances of up to approximately 10km outdoors are presented. The device is expected to be instrumental in studying the propagation characteristics of millimeter-wave frequencies. Utilizing data such as received power levels and power delay profiles (PDPs), comparisons with predicted values using path loss, K-factor, and other propagation models are facilitated. The mobile transceiver unit, integrated onto a vehicle platform, allows for flexible adjustment of transmitter and receiver positions, while synchronization issues with distance are mitigated using a rubidium atomic clock. Furthermore, automatic boresight alignment using scanning techniques is employed to locate the main sector of the antenna.