• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.139-152
• /
• 2019

The design of new navigation signals is a key factor in building new satellite navigation systems and/or modernizing existing legacy systems. Navigation signal design involves selecting candidate groups and evaluating and analyzing their signal performances. This process can be easily performed through software simulation especially at the beginning of the development phase. The analytical signal performance analysis software introduced in this study is implemented based on equations between the signal design parameters of Radio Navigation Satellite Service (RNSS) and the navigation signal figures-of-merit (FoMs). Therefore, this study briefly summarizes the RNSS signal design parameters and FoMs before introducing the developed software. After that, we explain the operating sequence of the implemented software including the Graphical User Interface (GUI), and calculate the FoMs of an example scenario to verify the feasibility of the software operations.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.191-205
• /
• 2020

Designing a new signal is essential in the development of a new Radio Navigation Satellite Service (RNSS) system. This paper introduces the signal design parameters and the figures of merit (FoMs) to be considered in designing a new RNSS signal, and then reviews their relationship in details. In addition, we show examples of the trade-off analysis between FoMs according to the signal design scenarios using an analytical simulation tool based on the relationship between the signal design parameters and the FoMs.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.97-102
• /
• 2012

The differential global positioning system (DGPS) transmits a GPS enhancement signal using a top-loaded monopole antenna in the medium frequency range. The top-loaded antenna in the medium frequency band can attain a radiation efficiency on the order of 10%. The antenna ground plane characteristics affect the antenna radiation efficiency. To improve the radiation efficiency, it is necessary to install the antenna on a ground plane with large enough physical dimensions and good conductivity. The antenna radiation efficiency is a primary factor in determining the DGPS service area. The service area of the DGPS using a medium frequency band is dominantly affected by the antenna radiation efficiency. To determine antenna radiation efficiencies accurately, the antenna radiation efficiencies of DGPS are deduced from the propagation power in this paper. Based on the deduced antenna radiation efficiencies, the service area for the Korean nationwide-DGPS is analyzed and evaluated.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.524-527
• /
• 2010

As the GPS(Global Positioning System) vulnerabilities were introduced, alternative systems to GPS backup have been studied for several years. Enhanced Loran(eLoran) as the worldwide ground-based supplementary radio navigation system was recommended as the cost effective alternative to GPS backup. Many efforts on adoption of eLoran as GPS backup have been presented. The US has been the leading role and announced that 70% enhancement for eLoran was established last year. However, the Obama administration cut off the eLoran budget on the fiscal year 2010 budget proposal while GAO's reports submitted that GPS service gap would be possible just some years later. Besides the US's condition, there are still many positive opinions on eLoran to GPS backup. This paper introduces the historical and technical aspects of eLoran and Korea's research topics.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.48-49
• /
• 2011

최근 스마트폰의 빠른 보급으로 다양한 사용자의 위치정보를 기반으로 하는 위치기반 서비스가 제공되고 있다. 다수의 위치기반서비스는 다양한 네트워크기반의 측위 기술을 이용하여 제공되고 있지만, 실외 측위에 사용되는 GPS(Global Positioning System)의 이용이 불가능한 실내 이동 환경에서는 실내 측위를 하기 위한 전문적인 시스템이 필요하다. RFID(Radio Frequency Identification)기술은 적은 인프라 구축비용과 낮은 유지보수 비용으로 실내 측위에서 많은 가능성을 보이고 있다. RFID기술을 이용한 대표적인 실내측위 시스템 LANDMARC는 기타 시스템과 달리 RFID리더기의 배치 수량을 줄이는 동시에 위치 측정의 정확성을 보장함으로써 높은 사용 가능성을 제공한다. 본 논문에서는 위치기반 서비스를 제공하기 위하여 RFID를 이용한 실내 측위 기법을 제안하여 기존의 LANDMARC 시스템에 비하여 더 높은 정확성을 보장함을 보였다.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.4
• /
• pp.208-215
• /
• 2013

Early iterations of the existing Global Positioning System (GPS)-based or radio lateration technique-based vehicle localization algorithms suffer from flip ambiguities, forged relative location information and location information exchange overhead, which affect the subsequent iterations. This, in turn, results in an erroneous neighbor-vehicle map. This paper proposes an extended information overlap measure (EIOM) algorithm to reduce the flip error rates by exchanging the neighbor-vehicle presence features in binary information. This algorithm shifts and associates three pieces of information in the Moore neighborhood format: 1) feature information of the neighboring vehicles from a vision-based environment sensor system; 2) cardinal locations of the neighboring vehicles in its Moore neighborhood; and 3) identification information (MAC/IP addresses). Simulations were conducted for multi-lane highway scenarios to compare the proposed algorithm with the existing algorithm. The results showed that the flip error rates were reduced by up to 50%.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.3
• /
• pp.99-105
• /
• 2014

A graphic processing unit (GPU) can perform the same calculation on multiple data (SIMD: single instruction multiple data) using hundreds of to thousands of special purpose processors for graphic processing. Thus, high efficiency is expected when GPU is used for the generation and correlation of satellite navigation signals, which perform generation and processing by applying the same calculation procedure to tens of millions of discrete signal samples per second. In this study, the structure of a GPU-based GNSS simulator for the generation and processing of satellite navigation signals was designed, developed, and verified. To verify the developed satellite navigation signal generator, generated signals were applied to the OEM-V3 receiver of Novatel Inc., and the measured values were examined. To verify the satellite navigation signal processor, the performance was examined by collecting and processing actual GNSS intermediate frequency signals. The results of the verification indicated that satellite navigation signals could be generated and processed in real time using two GPUs.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2017

Recently, indoor LBS has been attracting much attention because of its promising prospect. One of key technologies for its success is indoor location estimation. A popular one for indoor positioning is to find the location based on the strength of received Wi-Fi signals. Since the Wi-Fi services are currently prevalent, it can perform indoor positioning without any further infrastructure. However, it is found that its accuracy depends heavily on the surrounding radio environment. To alleviate this difficulty, we present a novel indoor position technique employing the geomagnetic characteristics as well as Wi-Fi signals. The geomagnetic characteristic is known to vary according to the location. Therefore, employing the geomagnetic signal in addition to Wi-Fi signals is expected to improve the location estimation accuracy.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.1
• /
• pp.1-12
• /
• 2019

In this paper, we implement a navigation software of a Global Navigation Satellite System (GNSS) receiver based on a commercial purpose GNSS software receiver platform and verify its performance by performing experimental tests for various GNSS signals available in Korea region. The SX3, employed in this paper, is composed of an application program and a Radio Frequency (RF) frontend, and can capture and process multi-constellation and multi-frequency GNSS signals. All the signal processing procedure of SX3 is accessible by the receiver software designer. In particular for an easy research and development, the Application Programing Interface (API) of the SX3 has a flexible architecture to upgrade or change the existing software program, equipped with a real-time monitoring function to monitor all the API executions. Users can easily apply and experiment with the developed algorithms using a form of Dynamic Link Library (DLL) files. Thus, by utilizing this flexible architecture, the cost and effort to develop a GNSS receiver can be greatly reduced.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.381-388
• /
• 2022

In 2021, development of a regional satellite navigation system called KPS was approved. In this regard, various studies are in progress, but there is no published signal model. So, in relation to the user segment, it is necessary to design a user receiver, but there is no information. Therefore, in this paper, we assume a signal model that can be a candidate signal for KPS based on related studies. This signal uses CNAV-2 structure navigation message, truncated Gold code and BPSK modulation. Based on this signal, a simulator is designed that can be used for receiver design later. The simulator consists of a signal generator and a signal transmitter, and is verified using a software receiver and spectrum analyzer.