• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.24-30
• /
• 2017

Obstacle defines all fixed and mobile objects, or parts thereof, that are located on an area intended for the surface movement of aircraft or extend above a defined surface intended to protect aircraft in flight or stand outside those defined surfaces and that have been assessed as being a hazard to air navigation. Aircraft operations are based on electronic supporting systems using radio frequencies to assist pilots. These frequencies can receive outside interference that change their courses or power, such as distortion, attenuation or reinforcements by an obstacle. This is a preliminary case study that shows the relation of instrument flight procedures and the degree of interferences introduced by a planned obstacle, which is a main bridge post, within the service volume of the radio navigation aids. For the purpose of this study, the case airport's data and it's VOR/DME and ILS systems' limitations are analyzed, as well as the relation of interferences between the obstacle and navigation aides were reviewed with the internal regulations in Korea.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.57-62
• /
• 2005

In spite of many advantages of OFDM, a major drawback for implementation is a non-linear distortion in the HPA due to a high PAPR problem. In this paper, the Complementary Clipping Transform technique (CCT) for the PAPR reduction of OFDM system is analyzed for the QPSK and QAM mapping data. BER performance and PSD in front of HPA and after HPA are analytically demonstrated.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.179-185
• /
• 2019

In this paper, we have studied narrow-band analog pre-distortion linearization technique using UHF 400 MHz band 20 W power amplifier. The analog pre-distorter used the SC1894 radio frequency power amplifier linearizer(RFPAL) provided by MAXIM Corp and through the look-up table technique confirmed the intermodulation distortion(IMD) performance and the adjusted channel leakage ratio(ACLR) improvement for bandwidth below 1 MHz which does not operate on existing chips. In the 400 MHz (400 ~ 500 MHz) band, IMD performance and the ACLR improvement of up to 17.46 dB based on 1-channel offset and up to 16.6 dB based on 2-channel offset were confirmed. In the system requiring the same linearity, we confirmed power efficiency improvement of 12.41% at output power of over 40 W.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.173-180
• /
• 2015

In this study, an algorithm that detects a spoofing signal for a GPS L1 signal was proposed, and the performance was verified through RF spoofing signal simulation. The proposed algorithm determines the reception of a spoofing signal by detecting a correlation distortion of GPS L1 C/A code caused by the spoofing signal. To detect the correlation distortion, a detection criterion of a spoofing signal was derived from the relationship among the Early, Prompt, and Late tap correlation values of a receiver correlator; and a detection threshold was calculated from the false alarm probability of spoofing signal detection. In this study, an RF spoofing environment was built using the GSS 8000 simulator (Spirent). For the RF spoofing signal generated from the simulator, the RF spoofing environment was verified using the commercial receiver DL-V3 (Novatel Inc.). To verify the performance of the proposed algorithm, the RF signal was stored as IF band data using a USRP signal collector (NI) so that the data could be processed by a CNU software receiver (software defined radio). For the performance of the proposed algorithm, results were obtained using the correlation value of the software receiver, and the performance was verified through the detection of a spoofing signal and the detection time of a spoofing signal.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.223-236
• /
• 2012

We develop a video processing method that allows the more advanced human perception oriented video coding. The proposed method necessarily reflects all influences by the rate-distortion based optimization and the human visual perception that is affected by the visual saliency, the limited space-time resolution and the regional moving history. For reflecting the human perceptual effects, we devise an online moving pattern classifier using the Hedge algorithm. Then, we embed the existing visual saliency into the proposed moving patterns so as to establish a human visual perception model. In order to realize the proposed human visual perception model, we extend the conventional foveation filtering method. Compared to the conventional foveation filter only smoothing less stimulus video signals, the developed foveation filter can locally smooth and enhance signals according to the human visual perception without causing any artifacts. Due to signal enhancement, the developed foveation filter more efficiently transfers the bandwidth saved at smoothed signals to the enhanced signals. Performance evaluation verifies that the proposed video processing method satisfies the overall video quality, while improving the perceptual quality by 12%~44%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.661-672
• /
• 2017

This paper introduces the NLSE(Nonlinear Least Squared Estimator) using curved LOBs(Line Of Bearings) considering the earth curvature based on sphere to avoid the map conversion distortion and minimize the estimation error. This paper suggests a method improving a performance of the NLSE using curved LOBs by using an ellipsoid model. The analysis of the simulation results shows that the NLSE using curved LOBs has better performance than the conventional triangulation method and can improve its performance using a suggested method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.283-288
• /
• 2018

In this paper, it is required that the next generation wireless transmission system can support a large number of users without distortion of transmission signal with high data rate in various different propagation environment while using limited resources as efficiently as possible, and therefore an efficient transmission system is continuously required. Because of the large amount of data to be handled in a limited frequency band, a very complex digital modulation scheme is adopted. the linearity of the power amplifier determines the linearity of the entire communication system, and thus a linear amplifier is required. In cognitive radion systems, there is a power control issue in the relationship between primary and secondary users. This problem is solved by simulating the communication system so as to select the cognitive radio power while power control while overcoming linearity by using feed-forward PA.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.85-93
• /
• 2007

In case that multichannel blind deconvolution (MBD) applies to signals of which autocorrelation has a high level, separated signals are temporally whitened by diagonal elements of a separation filter matrix. In order to reduce this distortion, the algorithms, which are based on either constraining diagonal elements of a separation filter matrix or estimating a separation filter matrix by using linear prediction residual signals, are presented. Still, some problems are generated in these methods, when we separate reverberation of signals themselves or interference signals from mixed signals. To solve these problems, this paper proposes the multichannel blind deconvolution method which divides processing procedure into the stage to separate interference signals and the stage to eliminate a reverberation of signals themselves. In simulation results, we confirm that the proposed algorithm can solve the problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.219-222
• /
• 2004

There are several factors that disturb an Ultra-Wideband (UWB) radio propagation in an indoor environment such as path loss, shadowing and multipath fading. These factors directly affect the quality of the received signal. In this paper, we investigated the influence of the human body shadowing on UWB propagation based on measured wireless channel in an anechoic chamber. The characteristics of the UWB channel including the transmitter and the receiver antenna effects are acquired over the frequency bandwidth of 3${\sim}$11 GHz. The major factors such as the power delay profile (PDP), the angular power distribution (APD), the pulse distortion and the RMS delay spread caused by the human body shadowing are presented.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.149-155
• /
• 2014

A study on the indoor positioning system has been active recently, and TDOA technique using acoustic signal has been used generally. The drawback of the TDOA is very weak against signal distortion due to multipath effect. Especially to estimate the smartphone position, the sound distortion is very severe, and the generated radio signal jitter when using WLAN or Bluetooth as a time reference signal makes the receiver difficult to estimate the position. In this paper, acoustic trigger signal for the receiver preparing the positioning signal reception is proposed, and the mitigation of the multipath effect is shown.